Dev Solutions Tech Private Limited

Power	50 W
No. of Channels	4
Impedance	4 ohm
Noise Level (SNR)	106 dB
Connectivity	Bluetooth
Usage	for Home Theater
Color	Black
Brand	Onkyo
Model	A 9110
Damping Factor Number	95
Dimensions (W x H x D)	435 x 129 x 330 mm

Onkyo builds on the success of its A-9010 pre-main amp with the new A-9110 Integrated Stereo Amplifier, a component that refines an original amp design that’s won an excellent critical and commercial reputation for dynamic, musical sound. Lively dynamics, deep bass, and layered detail emerge from warm and expressive tuning. WRAT delivers high-current power stability via large custom capacitors, while low-NFB amps capture the depth and spatiality of analog and hi-res recordings. Five RCA inputs including MM phono stage connect your sources while high-quality speaker-posts reveal Onkyo’s hi-fi heritage and careful attention to detail. The A-9110 invites you into each album, the hours passing comfortably in pure analog sound.



Stable high-current power with wide-range amplifiers: Dynamic changes in music cause impedance to fluctuate. If power can't be delivered when impedance drops, sound quality suffers. Onkyo's solution is WRAT, specifically its high-output EI transformer, huge custom-made main audio capacitors, and carefully selected high-quality parts. High-current stability controls the speaker-drivers for accurate and assured reproduction of dynamic musical passages. Further, the A-9110 features Onkyo's time-proven low-negative-feedback amplifier topology that distinguishes the timbral warmth, fullness, and vibrancy of the recording. This circuitry captures a wide frequency spectrum with uncommonly low distortion.

Phase Matching Bass Boost enriches sound at low volume: Most pre-main amps have a loudness button designed to boost low-mid frequency sound. However, conventional designs are prone to phase-shift, which degrades the clarity of the vocal frequency band. Onkyo's Phase Matching Bass Boost function eliminates phase-shift between low- and mid-range frequency bands above 300 Hz. Bass response is enhanced without compromising vocal clarity, and that's something especially useful when playing music at low volume where bass and high-frequency sounds are more difficult to hear.


Sounds clearer at low volumes: When playing music at low volume, the signal normally drops close to the component's noise floor. The signal picks up noise, which is amplified, and the result is muffled sound. To avoid this, the A-9110 features Optimum Gain Volume Circuitry, a volume circuit that requires less than half the usual amount of attenuation. The signal never approaches the noise floor, so you can enjoy clearest sound at low volume.

Power	500 W
No. of Channels	4
Impedance	8 ohm
Damping Factor	200
Color	Black
Weight	9.1 kg
Brand	Parasound
Model	Newclassic 275 V2
Frequency Response	20 Hz
Current Capacity	20 amps

Description

Ooberpad announces the availability of Parasound NewClassic 275 v.2 Two Channel Power Amplifier. This is the new v.2 version of the Model 275 with several new features for enhanced performance and convenience. First is a new A/B speaker button lockout switch on the rear panel. When this switch is set to Lockout, the front panel A and B buttons are disabled and speakers A and B will always be on. This can be particularly useful for a professional audio installer who never intends for the client to use the front panel buttons.

Key Features:

• 90 watts x 2 into 8 Ω (all channels driven)
• 150 watts x 2 into 4 Ω or 2 Ω (all channels driven)
• 200 watts x 1 bridged into 8 Ω or 4 Ω
• 20 amps peak current per channel
• 2 Ohm stable operation with load selector switch
• Two pairs of speaker outputs with front panel A/B buttons
• Rear-mounted lockout switch disables front A/B buttons
• High pass filter, switchable for 20Hz or 40Hz
• Automatic on/off by DC trigger with looping output
• Automatic on/off by audio signal with 2 sensitivity settings
• Fully discrete circuitry with high current toroid transformer
• Bridging switch for stereo or mono operation
• Efficient, low heat design
• DC Servo and relay protection circuits
• Rear-mounted left and right gain controls
• Standby, channel status and high temperature indicators
• Gold-plated RCA input jacks
• Heavy duty 24k gold-plated 5-way speaker terminals
• 115/230v selector on rear panel
• 1U rack mount kit available separately (Model RMK11)

Power	300 W
No. of Channels	2
Impedance	8 ohm
Color	Black
Weight	12.3 kg
Power Output	125 Watts
Frequency Range	50 kHz
Dimension (WxDxH)	17.25x14x4.25 inch
Brand	Parasaound
Model	Newclassic 2125 V2

Description

From the house of Ooberpad arrives the high-utility Parasound NewClassic 2125 v.2 Two-Channel Power Amplifier. Parasound's NewClassic Model 2125 v.2 is one of the company's most top-selling two-channel power amplifier. Its unbeatable combination of power, dynamic features, sturdy build quality and cost-efficient make it a must for all but the most demanding systems. And the THX Ultra2 certification means that it meets the most stringent performance standards for convincing reproduction of movie soundtracks.

Key Features:

• Class AB Two-Channel Power Amplifier
• 125 Watts per Channel at 8 Ohms, 225 Watts per Channel at 4 Ohms
• Bridged Mono Mode Delivers 400 Watts
• High-Current Toroid Power Transformer
• Automatic Turn-On Options (12V Trigger, Audio Sensing, or Manual)
• Rack-Mountable Chassis
• Short-Circuit and Overload Protection

Power	100 mW
No. of Channels	5
Impedance	32 ohm
Noise Level (SNR)	110 dB
Usage	for Stage Performance
Dimension (LxWxH)	33.5 x 34 x 9.5 cm
Weight	7kg
Brand	Acoustic Portrait
Model	Swara V2

Headphones provide a very unique aural experience and in modern time, it has become one of the most important personal audio solution. Acoustic’s portrait Swara Headphone amplifier would enable audiophiles to use their headphones to its fullest potential. We recommend to use the amplifier with high quality source such as the Swara M2rPi DAC.

Swara Headphone Amplifier is built using the finest grade of components and a high capacity power supply. The design and build quality ensures the amplifier is capable of supporting the most difficult headphones to drive. The sonics of this amplifier is very typical of Acoustic Portrait – a neutral sound that is highly detailed, yet very soothing to the ears.


Features :

• Amplification with discrete components
• High quality power supply with toroidal transformer
• Premium capacitor throughout the circuit
• Balanced & SE inputs
• Powerful & Capable of driving broad range of headphones

Impedance	8 ohm
Dimension (LxWxH)	150x437x150 mm
Weight	15 kg
Product Power	180 W
Current Capacity	45 amps peak per channel
Brand	Parasound
Model	HINT 6 Halo
No. of Channels	2

From the house of Ooberpad arrives the power-packed Parasound HINT 6 Halo Integrated Amplifier. Parasound's award-winning Halo Integrated Amplifier would seem to be a hard standard to meet. But Parasound's new HINT 6 is an improved version of the globally renowned Halo Integrated Amplifier. After the original Halo Integrated Amplifier, hit the market, it quickly gained a popular name for itself - "HINT" in the Parasound community, and that name is now adopted in the new model as the HINT 6. The remarkable sonic quality and musicality of the original Halo Integrated (HINT) carry on in the HINT 6. The new model is feature-packed with Burr-Brown volume control with easy-to-read front panel display. It is also packed with an upgraded USB receiver along with the plug-and-play functionality for Windows and Mac, a second optical input, increased phono gain, superlative channel separation, and some high-value refinements to its aesthetics.

Warranty 

1-year manufacturer's warranty

Key Features:

• Burr Brown analog resistor ladder volume control
• Dimmable front panel volume display
• Updated USB receiver is Plug and play with Windows 10 and MAC
• An additional optical input (2 total)
• Ball bearing supported solid aluminum volume knob
• Programable default turn on volume setting
• Favorite volume memory with remote control button
• Increased phono stage gain for lower output cartridges
• Improved Left/Right channel separation and balance tracking
• Updated cosmetics with subtle gold highlights

Preamp and DAC Features:

• ESS Sabre32 Reference DAC (ES9018K2M)
• Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
• USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
• Coax and optical inputs accept PCM up to 192kHz/24-bit
• Analog bass management with high & low pass crossovers
• Home theater bypass input for surround sound integration
• Front panel subwoofer level control
• Dedicated high current headphone amplifier (TI TPA6120)
• Phono input for MM, MC and MI with 100 Ω or 47k Ω load
• Front panel Aux input with automatic +12 dB gain stage
• 5 pairs RCA line level Analog inputs
• 1 pair XLR balanced Analog input
• Balanced XLR and RCA left and right preamp outputs
• 1 balanced XLR and 2 RCA subwoofer outputs
• Bass & treble controls with relay bypass from remote or front panel
• Rear panel IR input and IR loop output jacks
• 12 Volt trigger output
• Back-lit remote control with discrete buttons
• 0.5w standby power consumption meets Energy Star & EU specs

Power Amp Features:

• 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
• 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
• Power amp circuit topology designed by legendary John Curl
• Direct amplifier input to bypass preamp section
• High bias class A/AB operation
• Oversized shielded toroid power transformer
• Dual-mono power supply and power amplifier
• 40,000uF power supply filter capacitance
• Matched JFET input stages and MOSFET driver stages
• 12 high voltage/high current bipolar output transistors
• Heavy-duty 24k gold-plated 5-way speaker binding posts

Power	100 W
No. of Channels	6
Impedance	4 ohm
Damping Factor	500
Color	Black
Weight	15.3 kg
Brand	Marantz
Model	PM 12SE
Dimensions (W x D x H)	440 x 453 x 123mm

Enjoy enhanced quality audio with your speakers, audio source, and the Marantz PM-KI Ruby Stereo 200W Power Amplifier. It outputs up to 100W per channel RMS at 8 ohms and can drive 4 ohm speakers at 200W each. It features seven total stereo RCA inputs, including one reserved for a MM or MC turntable. Omitting the inclusion of any digital connectivity helps retain a clean path for the analog audio signal to pass through.

HDAM (HYPER DYNAMIC AMPLIFIER MODULE) TECHNOLOGY

The onboard HDAM SA3 and SA2 are combined with an optimized circuit design layout to help provide enhanced sound quality and performance.

MARANTZ MUSICAL PREMIUM PHONO EQ

Designed to deliver optimal sound by simplifying the signal path, the Marantz Musical Premium Phono EQ stage can be used with both moving magnet and moving coil cartridges thanks to a built-in MC head amplifier. Distortion is reduced by using two-stage amplification in the phono stage, and Maranz HDAMs are combined with JFETs (junction gate field effect transistors) in the output stage to provide high input impedance. The exclusion of coupling capacitors further simplifies the design, reducing signal distortion and enhancing signal purity.

ELECTRONIC VOLUME CONTROL

The electronic volume control uses its IC to augment channel separation, dynamic range, and distortion reduction, while retaining the operational feel of an analog volume control device. This volume control is designed for high linearity as well.

CURRENT FEEDBACK AMPLIFIER

Current Feedback amplification is engineered to match the requirements of Super Audio hi-res music for wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited, generating a low phase shift. This reduces the need for phase compensation by minimizing Negative Feedback (NFB), simplifying the signal path, contributing to a high through-rate with enhanced transient response and sonic transparency across the bandwidth. Current Feedback also makes the amplifier insensitive to difficult speaker loads.

DESIGNED TO DELIVER POWER

The PM-KI Ruby is designed to maintain the purest possible sound and support the power needed for demanding speakers. The amplifier output stage delivers up to 100W per channel into an 8-ohm load, and can cope with high-impedance speakers as well, delivering up to 200W per channel into 4 ohms. The amplifier module connects directly to the rear panel PCB to help maintain signal purity and sound stability.

PURE ANALOG AMPLIFIER

Rather than build a DAC into the amplifier, which would add noise within the chassis, the PM-KI Ruby is dependent on the DAC built into the audio source, eliminating interference with the analog signals passing through the amp to help maintain an analog environment that's as pure and clean as possible.

MULTIPLE ANALOG INPUTS AND OUTPUTS

In addition to nickel-plated copper phono and CD analog inputs, the PM-KI Ruby features two line-level inputs and two pairs of recorder input/output jacks that allow the connection of multiple sources and recorders. You can use it as a standalone stereo amplifier for additional system configuration versatility with the power amp input, or connect the PM-KI Ruby to an external amplifier via the stereo pre-amp outputs.

DEDICATED HEADPHONE OUTPUT

Thanks to the onboard HDAM discrete modules, the headphone circuit is designed to deliver enhanced audio fidelity with a wide range of headphone types and impedances, including low-impedance headphones.

Power	45 W
Frequency Response	10 Hz
Total Harmonic Distortion	0.08%
Damping Factor	100
Input Sensitivity	2.2 mV
Brand	Marantz
Model	PM6007

Marantz PM6007 Integrated Amplifier with Digital Connectivity has arrived. Ooberpad presents Marantz PM6007 - an audiophile-grade stereo integrated amplifier with digital connectivity. The PM6007 builds on the legacy of its predecessors, upgrading the built-in 24-bit/192kHz digital-to-analog converter to ensure precision, nuanced playback of digital sources. And HDAM3 analog audio circuitry packs a punch with faster signal transfer and better transient response.

The PM6007 brings forth Marantz’ most musical sound and is the best fit for those ready to take the next step in their 2-channel Hi-Fi system. Power-packed by a Toroidal power transformer and customized block capacitors, the PM6007 integrated amplifier delivers 45 watts (8ohm, 20Hz-20kHz) of power-per-channel. You can easily connect both analogue and digital sources or connect your turntable to the built-in phono pre-amplifier. Indulge in your favourite Hi-Res audio content through the 192-kHz/24-bit D/A converter and experience enhanced bass with a subwoofer-out option.

Warranty

1-year manufacturer's warranty

Key Features:

• Audiophile grade Stereo Amplifier from Marantz
• Take your next step in Hi-Fi: The PM6007 integrated current feedback amplifier powers 2x 45W (8 ohms RMS, 20Hz – 20kHz) to offer a refined audio experience
• Meticulously and masterfully tuned
• Wide range of connectivity
• An updated audio experience
• Digital filter modes for Optical/Coaxial input
• In addition to high-quality speaker terminals with A/B switching capability, a fully-shielded DAC unit, and copper screws, the rigid feet provide a true-to-performance sound
• Marantz proprietary HDAM-SA3 circuit
• Advanced thermal compensation
• Customized components for a more refined sound
• Integrated phono input
• Deeper bass with a subwoofer output

Power	60 W
Brand	Marantz
Model	AV7706 AV
Dimensions ((W x D x H)	17.3 x 16.2 x 7.3 inches
Color	Black
Channels	7
Ethernet Ports	Yes

Marantz HDAM and current feedback topology

The AV7706 features exclusive Marantz Hyper Dynamic Amplifier Module (HDAM) technology that provide ultra-fast slew rate, true wideband performance, and maximum dynamic range for optimum sound quality.

 

The next chapter in movie entertainment

The new AV7706 offers the highest-quality, crystal-clear viewing experience. Enjoy your movies with 8K/60Hz pass-through or upscaling, as well the latest in HDMI technology like Dynamic HDR and Quick Media Switching (QMS), which is used in movies to eliminate video delay.

 

More than 60 Years of audiophile heritage

Founded in 1953, Marantz has a rich history of designing audio components embraced by music lovers and critical listeners around the world. Because Music Matters, the AV7706 continues our long tradition of delivering a best-in-class listening experience for music and cinema.

 

11.2Ch 8K Ultra HD AV Surround Pre-Amplifier with HEOS® Built-in and Voice Control

 

Featuring 11.2 channel XLR and RCA pre-outs, the Marantz AV7706 supports all 3D audio formats including Dolby Atmos® , Dolby Atmos Height Virtualization, DTS:X® , DTS Virtual:X™, IMAX Enhanced® , and Auro-3D® . Enjoy audio playback with exceptional quality thanks to Marantz-proprietary HDAM modules and extensive audio tuning. Stream from Amazon Music HD, Spotify, TIDAL, Deezer, and more with HEOS® Built-in.

Features of the Marantz AV7706 AV Surround Pre-Amplifier

• 2 channel XLR pre-out: 11.2 channel RCA pre-out
• Dolby Atmos®, Dolby Atmos Height Virtualization Technology, DTS:X® , DTS Virtual:X™, IMAX® Enhanced, and Auro-3D® processing for exceptional listening
• Marantz proprietary HDAM circuit boards, Current Feedback circuitry, AKM AK4458 32-bit D/A converters, and Hybrid PLL Clock Jitter Reducer for more detailed, dynamic sound
• 8K/60Hz and 4K/120Hz pass-through support for every entertainment need: 8 HDMI inputs (incl. 1 front) with full HDCP 2.3 support; 3 HDMI outputs (incl. Zone 2)
• With 8K/60Hz pass-through and upscaling, Dynamic HDR and Quick Media Switching (QMS), enjoy the smoothest, crystal-clear picture quality available
• With 4K/120Hz pass-through, Variable Refresh Rate (VRR), Auto Low Latency Mode (ALLM) and Quick Frame Transport (QFT), experience gaming thrills with amazing imaging, reduced lag and tearing
• The latest HDR format support including HDR10, HDR10+, HLG, Dolby Vision, 4:4:4 colour resolution and BT.2020, as well as Dynamic HDR provides exceptional brightness, clarity, and contrast for miraculous picture quality
• Advanced video processing with analogue to HDMI conversion; SD to HD/8K upscaling
• eARC (Enhanced Audio Return Channel) supports the most advanced surround and object-based audio formats via single HDMI connection between AVRs and compatible TVs
• Stream music from Internet Radio, Spotify Connect, Amazon Music HD, TIDAL, Deezer and more with Bluetooth, AirPlay 2 and HEOS® Built-in
• Built-in Wi-Fi with 2.4GHz/5GHz dual band support
• Enjoy multi-room whole-home audio streaming with HEOS®
• Built-in technology
• Simply use your voice to control your preferred voice assistant like Amazon Alexa, Google Assistant and Apple Siri • Decodes ALAC, FLAC and WAV lossless files up to 24-bit/192-kHz; DSD 2.8MHz and 5.6MHz tracks – enjoy your music exactly as the artist intended
• Suite of Audyssey room correction software: Audyssey MultEQ XT32, Dynamic Volume and Dynamic EQ, LFC, and Sub EQ HT
• Third-party integration and IR remote control, RS-232C serial port, and custom install support
• Seamless out-of-the-box experience with Quick Start Guide, guided Setup Assistant, and Marantz AVR Remote App

Power	300 W
No. of Channels	4
Impedance	8 ohm
Noise Level (SNR)	100 dB
Damping Factor	800
Color	Silver
Brand	Nad
Model	M23
Frequency response	20 Hz

NAD Masters M23 Stereo Power Amplifier

Pure Power

The M23 employs Eigentakt™ class-D amplifier modules manufactured by NAD under license from Denmark’s Purifi Audio. Purifi’s load-invariant design provides wide, flat frequency response, even into challenging loudspeaker loads. Noise, harmonic distortion, and IM distortion are virtually unmeasurable at all frequencies and output levels. Another benefit of the Eigentakt™ design is extremely low output impedance and correspondingly high damping factor, for iron-clad control of the loudspeaker output. NAD combines the Eigentakt™ design with our own sophisticated switched-mode power supply, which can provide additional reserves of current when needed. Amazingly powerful and transparent, the M23 can deliver 2x260W of peak power into 8 ohms and 2x520W into 4 ohms.

Uncompromised Performance

The ideal amplifier will achieve vanishingly low distortion, ultra-high damping factor, and rock-solid stability with any loudspeaker loud. There are many amplifiers that perform well in one or two of these areas, but fall short in others. Thanks to Purifi’s highly efficient Eigentakt™ design and NAD’s proven switch-mode power supplies, the M23 excels in all three areas – without the excess weight and cost of the old-fashioned linear power supplies and class-AB output stages used with traditional amplifiers. Eigentakt™ outperforms previous class-D implementations by a significant margin, delivering transparent, detailed sound with expansive soundstaging and holographic imaging, at all listening levels and with all types of program material – even during complex musical passages.

Flexible and Powerful

Equipped with single-ended RCA and balanced XLR auto-sensing inputs, three-position gain-control switch, and 12V trigger input, the NAD Masters M23 HybridDgital Stereo Power Amplifier can easily be integrated into a high-performance separates system. Two M23 amplifiers operating in bridged mode can be paired together, each delivering 700W of continuous power into 8 ohms. The M23 amplifier can also be paired with NAD’s award-winning Masters M33 BluOS Streaming Amplifier. With the two Eigentakt™ amplifiers operating in bridged mode, the M33/M23 combination will deliver a staggeringly powerful 700Wpc continuous output.

Elegant and Practical

With its elegant all-alloy casework, the Masters M23 HybridDigital Stereo Power Amplifier is as pleasing to the eye as it is thrilling to the ears. The M23 has the same quality of construction for which NAD’s Masters Series is renowned. Rigid panels and magnetic iso-point feet provide a rock-solid foundation for the M23’s multi-layer circuit boards and intricate internal construction. Truly the M23 represents a new pinnacle in power amplifier design.

Features & Details

• HybridDigital Purifi Eigentakt™ amplifier technology
• Continuous Power Output: 2x200W into 8 ohms; 2x380W into 4 ohms
• Dynamic Power Output: 2x260W into 8 ohms; 2x520W into 4 ohms
• Bridged Power Output: 700W mono continuous into 8 ohms
• In bridged mode, can be combined with the NAD M33 BluOS Streaming Amplifier to create a 2x700W system
• Virtually unmeasurable noise, harmonic distortion, intermodulation distortion
• Wide, flat frequency response into any loudspeaker load
• Balanced (XLR) and single-ended (RCA) auto-sensing inputs
• Three-position adjustable gain control
• 12V trigger input

Brand	Marantz
Model	PM 14S1
Color	Black
Frequency response	5 Hz
Power consumption	220 W
Dimensions (W x H x D	440 x 123 x 457 mm

Key Features:

• Premium Special Edition Super Audio CD Player
• SA-CD / CD playback, USB-A and DAC-Mode (USB-B, opt & coax in) for High Resolution Audio
• Marantz original SA-CD mechanism for accurate data read out
• USB-B port works in asynchronous mode and capable of handling PCM up to 192kHz/24bits and DSD2.8 & 5.6Mhz direct streaming
• Analogue audio circuits featuring Marantz HDAM ® -SA2 for high quality audio
• High Current Audiophile DAC DSD1792 and accurate dual system clock
• Toroidal Transformer and high quality customized components
• Rigid premium chassis with 5mm thick Aluminum top cover and heavy new feet for anti-vibration
• Fully discrete high current headphone amplifier
• System remote to control Amplifi er, CD-Player and
• Network Player

Power	50 W
No. of Channels	2
Impedance	4 ohm
Color	Black
Weight	2.6 kg
Brand	Marantz
Model	M-CR511

This easy-to-use unit is your open doorway to an endless supply of new digital media. The network features a Wi-Fi connection at the touch of a button (upgraded to high speed 11n, for a faster and more reliable connection), a new digital input for TV, a USB connection on the front, and a second rear USB for extra convenience. It will charge your iDevices even when in standby mode. It also supports ALAC, 192kHz / 24bit high resolution WAV, FLAC, AIFF files, and Gapless playback. With the M-CR511 you can now enjoy Spotify Connect, as well as a host of other digital media and streaming features. Alongside listening to millions of songs on the world’s most popular online music service, the Melody Stream allows playback of music libraries stored on a NAS (Network Attached Storage) or a computer, provide access to thousands of free internet radio stations, and even support Apple AirPlay. Listeners can also take control via an Android and iOS compatible Marantz Hi-Fi Remote app. Flaunting an extraordinarily stylish and elegant design, the M-CR511 also features a new acrylic top cover, providing an anti-scratch coating to help keep the system in pristine condition.

ONE SYSTEM THAT STREAMS IT ALL

Packed within the MCR511's compact dimensions is a serious music streamer. Connect to your Internet hub via Ethernet or the upgraded Wi-Fi connection and you're ready to receive near limitless entertainment. vTuner gives you access to thousands of Internet radio stations from around the world. Or you can listen to your own music library via DLNA compatible streaming. Just link your NAS drive or PC into the hub and you're good to listen.

Ready For Spotify Connect

• Spotify Connect uses your existing Spotify account but seamlessly transfers it between sources. Listen to Spotify on your mobile device on your way home then, when you arrive back, transfer it to the Marantz system at the touch of a button. Whether you use 3G or 4G, wi-fi or LAN, AirPlay or Bluetooth, Spotify Connect simply keeps the music following - seamlessly.

Now With Bluetooth NFC

• New to the MCR511 is Bluetooth NFC connectivity. In addition to Apple's AirPlay you now have the option of transferring music on your mobile or tablet via Bluetooth. With NFC (Near Field Communication), making the connection is as simple as tapping your device against the system.

Twin USB Sockets For IOS Connectivity:

• Connect up your Apple iOS device to the front or rear USB sockets and you'll not only enjoy high quality music playback but also charging of your Apple device - even when in standby.

 

Connect Up Your TV, Too

• Around the back of the MCR511 you'll find both optical digital and RCA phono analogue inputs. Perfect for connecting sources such as your TV or games console, the MCR511 improves the sound of much more than just your music.

Quality Sound From A Class-leading Player

• As you'd expect from this highly respected hi-fi company, the Marantz MCR511 is a superior sounding mini system. A higher than average 50 watts (at 6 ohms) per channel gives it greater punch and depth of bass than many of its rivals. Added to this, the digital amplification uses less power than a conventional amplifier giving you the best of both worlds.

Stylish Simplicity

• Compact and curvaceous, the MCR511 is stylish yet unobtrusive. A new acrylic top with anti-scratch surface keeps the look fresh and unique. For a sleek appearance, Marantz have limited the button count to a minimum. You can control the Melody Stream via the supplied remote control or by an app for your Smartphone (Apple or Android).