Devi Enterprises

• Zynq UltraScale+ RFSoC ZCU111 Evaluation Board with XCZU28DR-2FFVG1517E RFSoC
• DDR4 Component – 4GB, 64-bit, 2666 MT/s, attached to Programmable Logic (PL)
• DDR4 SODIMM – 4GB 64-bit, 2400 MT/s, attached to Processor Subsystem (PS)
• Ganged SFP28 cage to support up to 4 SFP/SFP+/zSFP+/SFP28 modules

• USB3, DisplayPort, and SATA
• FPGA Mezzanine Card (FMC+) interface for I/O expansion including 12 x 32.75 Gb/s GTY transceivers and 34 user defined differential I/O signals
• XM500 RFMC balun transformer add-on card with 4 DACs/ 4 ADCs to baluns 4 DACs/ 4 ADCs to SMAs

• All power supplies on board, single 3.3V Power required
• Graphic Processing Unit (GPU) + Video codec unit (VCU)
• User I/O's: 65 x PS MIOs, 48 x PL HD GPIOs, 156 x PL HP GIPIOs (3 banks), Serial transceivers: 4 x GTR + 16 x GTH
• 128 MByte SPI Boot Flash (dual parallel)
• 2 GByte DDR4 SDRAM
• B2B Connectors: 4 x 160 pin
• Size: 52 x 76 mm
• 3 mm mounting holes for skyline heat spreader
• Xilinx Zynq UltraScale+ XCZU7EV-1FBVB900E, ZU7EV 900 Pin Packages

• New UEFI BIOS and EZ Mode: Friendlier, easier, and more intuitive with helpful info added
• USB 3.0 BOOST (UASP Support): 170% faster transfer speeds than traditional USB 3.0
• Network iControl: Real-time network bandwidth management
• Crash Free BIOS 3: Restore corrupted BIOS data from USB storage
• AI Suite 3: One-stop access to innovative ASUS features

• High performance Quad-core ARM SoC up to 1.8GHz with 2GB RAM- The Tinker Board S features the Rockchip RK3288 SoC and Mali - T764 GPU along with 2GB of Dual Channel DDR3 memory and 16GB of fast & durable eMMC onboard storage
• Non shared GB LAN & USB, Shielded Wi-Fi & BT with upgradable antenna support – Tinker board S features a high speed non shared GB LAN port for true Gigabit class networking throughput along with 4 non shared USB 2.0 ports. It also features onboard shielded Wi-Fi & Bluetooth for robust IOT & network connectivity
• Highly compatible PCB & Topology –Leveraging industry standard PCB & topology dimensions along with IO and connection placement, Tinker board S offer extensive compatibility with SBC accessories & chassis.
• HD & UHD video support and HD audio– Tinker Board S supports 192/24bit HD audio playback with automatic audio jack detection as well as accelerated HD & UHD ( 4K ) video playback and supports HDMI CEC for seamless power on & off configurations
• DIY Friendly Design – Tinker Board S features multiple DIY friendly use features including a color coded enhanced GPIO header with dual mode I2S, silkscreened PCB, onboard power on pin

Additional Information:

• Delivery Time: 3-5 Days

• 1.1 GHz Intel Celeron N3450 Quad-Core
• 4GB of 1866 MHz LPDDR3 RAM
• 64GB eMMC SSD
• Integrated Intel HD Graphics

Turn your monitor into a fully functional computer with the Compute Card Single Board Computer from Intel. With a similar form factor to a slim external drive, the Compute Card offers the performance you need to stream movies, work on projects, browse the internet, and more. The system is powered by an Intel Celeron N3450 quad-core processor, 4GB of LPDDR3 RAM, and a 64GB eMMC SSD, which allow you to simultaneously run multiple software programs while storing your important files.

The Compute Card delivers high-resolution images utilizing integrated Intel HD Graphics, and is capable of connecting to HDMI- and DisplayPort-equipped displays. Additionally, this portable computing system supports wireless communication via 7265ac Wi-Fi and Bluetooth. The Compute Card does not come with an operating system installed, giving users the flexibility to purchase the OS of their choice.

• Intel Remote Wake Technology
• Intel HD Audio Technology
• Intel Virtualization Technology (VT-x)
• Intel Platform Trust Technology (Intel PTT)

Additional Information:

• Item Code: BLKCD1C64GK
• Production Capacity: 64GB
• Delivery Time: 10
• Packaging Details: Box

eInfochips EIC-Q660-500 is a Single Board Computer (SBC) based on Qualcomm Snapdragon 660 System on Chip (SoC). Qualcomm Snapdragon 660 SoC supports a leap in performance, engineered to allow enhanced user experiences at efficient low power consumption. Qualcomm® Adreno™ 512 GPU enables up to 30% better graphics making this SBC ideal for Digital Signage, Medical Imaging and high-end video applications.

• eInfochips QCS8250: EIC-QCS8250-200
• eInfochips QRB5165: EIC-QRB5165-200-
• eInfochips QCS410: EIC-QCS410-205
• eInfochips QCS610: EIC-QCS610-205
• eInfochips QCS410: EIC-QCS410-200
• eInfochips QCS610: EIC-QCS610-200
• eInfochips 624: EIC-Q624-200
• eInfochips 660: EIC-Q660-510
• eInfochips 410: EIC-Q410-200
• eInfochips 820: EIC-Q820-200 
• eInfochips QCS8250: EIC-QCS8250-210
• eInfochips QRB5165: EIC-QRB5165-210
• eInfochips QCS610: EIC-QCS610-215
• eInfochips QCS610: EIC-QCS610-210
• eInfochips QCS410: EIC-QCS410-210
• eInfochips QCS410: EIC-QCS410-215
• eInfochips 865: EIC-Q865-210
• eInfochips 855: EIC-Q855-210
• eInfochips 624: EIC-Q624-210
• eInfochips 820: EIC-Q820-210
• eInfochips 410: EIC-Q410-210
• eInfochips 845 : EIC-Q845-210

• Quad Core 2GHz A15
• 2 GB RAM
• USB 3.0
• 40 pin GPIOs with 7 pin I2S

• 8GB of on-chip High Bandwidth Memory (HBM)
• Multiple external memory interfaces (RLDRAM3, QDR-IV, DDR4)
• Quad 32Gbps QSFP28 Interfaces

• PCIe Gen3 x16 & Gen4 x8
• VITA 57.4 FMC+ Interface
• 10/100/1000 Mbps Ethernet

• Optimized for quickly prototyping applications using Kintex UltraScale FPGAs with access to the following features
  • 64-bit DDR4 Component Memory
  • Dual SFP+ cages for Ethernet
  • PCIe Gen3 x8
  • 2x FPGA Mezzanine Card (FMC) interface for I/O expansion

• Targeted Reference Design – MicroBlaze Processor Sub-System
• Includes all the development tools needed to support Embedded Hardware & Software Development

• In-depth step-by-step Hardware and Software Tutorials
• Strong Ecosystem support

• Optimized for quickly prototyping cost sensitive applications using Artix-7 FPGAs
• Hardware, design tools, IP, and pre-verified reference designs
• Demonstrates a high performance data transfer system using a PCI Express® x4 Gen2
• Reference design implemented with Northwest Logic DMA engine attached to a AXI interface
• Advanced memory interface with 1GB DDR3 SODIMM  up to 533MHz / 1066Mbps

• Enabling high-performance serial connectivity with GTP ports on FMC, SFP, & SMA
• Supports embedded processing with MicroBlaze, soft 32bit RISC
• Develop networking applications with 10-100-1000 Mbps Ethernet (RGMII)
• Implement Video display applications with HDMI out
• Expand I/O with the FPGA Mezzanine Card (FMC) interface

• Hardware, design tools, IP, and pre-verified reference designs

• Providing higher efficiency alternative to LVDS communication in multiple market segments

• AVerMedia EN715 Carrier Board for NVIDIA Jetson Nano and Xavier NX Module
• AVerMedia EN713 Carrier Board for NVIDIA Jetson Nano and Xavier NX Module
• AVerMedia NX215 Carrier Board for NVIDIA Jetson Nano and Xavier NX Module
• AVerMedia AG411 Standard Carrier Board AG411 for NVIDIA Jetson AGX Xavier or Xavier Industrial Module
• AVerMedia EX731 Standard Box PC EX731 Equips NVIDIA Jetson TX2 Module
• AVerMedia D111NX Development Systems
• AVerMedia D313AX Development System

It’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Raspbian Image. It uses the AllWinner H3 SoC, and has 1 GB DDR3 SDRAM.

• Based on new Octavo Systems OSD3358-SM 21mm x 21mm system-in-package that includes 512MB DDR3 RAM, 1-GHz ARM Cortex-A8 CPU, 2x 200-MHz PRUs, ARM Cortex-M3, 3D accelerator, power/battery management and EEPROM
• 72 expansion pin headers with power and battery I/Os, high-speed USB, 8 analog inputs, 44 digital I/Os and numerous digital interface peripherals
• microUSB host/client and microSD connectors

• Battery support: 2-cell LiPo with balancing, LED state-of-charge monitor
• Charger input: 9-18V
• Wireless: 802.11bgn, Bluetooth 4.1 and BLE
• Motor control: 8 6V servo out, 4 bidirectional DC motor out, 4 quadrature encoder in
• Sensors: 9 axis IMU (accels, gyros, magnetometer), barometer, thermometer
• User interface: 11 user programmable LEDs, 2 user programmable buttons
• Easy connect JST interfaces for adding additional buses and peripherals including: GPS, DSM2 radio, UARTs, SPI, I2C, 1.8V analog, 3.3V GPIOs

• USB client for power & communications
• USB host
• Ethernet
• HDMI
• 2x 46 pin headers

• BeagleBone Black mechanical and header compatibility
• 1GB RAM and 16GB on-board eMMC flash with high-speed interface
• USB type-C for power and superspeed dual-role controller; and USB type-A host
• Gigabit Ethernet, 2.4/5GHz WiFi, and Bluetooth
• microHDMI
• Zero-download out-of-box software experience with Debian GNU/Linux

• USB client for power & communications
• USB host
• 802.11b/g/n and Bluetooth 4.1 plus BLE
• HDMI
• 2x 46 pin headers

• USB client for power & communications
• USB host
• Ethernet
• 2x 46 pin headers
• 2x Grove connectors (I2C and UART)

• USB client for power & communications
• USB host with 4-port hub
• WiFi 802.11 b/g/n 2.4GHz
• Bluetooth 4.1 with BLE
• 2x 46 pin headers
• 2x Grove connectors (I2C and UART)

• USB client for power & communications
• 4x USB host
• Gigabit Ethernet
• 2x 46 pin headers

• USB-to-serial
• USB host
• Reset button
• 2 push buttons
• Analog light sensor
• Tri-color LED
• SPI GPIO expander with 2-digit 7-segment display
• I²C Accelerometer

• I²C EEPROM

• USB client: power, debug and device
• USB host
• Ethernet
• 2x 46 pin headers

• 2×Gigabit Ethernet
• 3×SuperSpeed USB 3.0 host
• HighSpeed USB 2.0 client
• eSATA (500mA)
• full-size HDMI video output
• microSD card slot
• Stereo audio in and out
• 4×60-pin headers with PCIe, LCD, mSATA

• 2D/3D graphics accelerator
• 4 USB 2.0 ports
• MMC/SD connector
• DVI-D port
• S-Video port
• USB mini AB connector
• Ethernet

• USB 2.0 on-the-go (OTG) port
• Connect standard peripherals to USB using any of the following:
  • A mini-A to standard-A cable adapter
  • DVI-D using an HDMI to DVI-D adapter
  • MMC/SD/SDIO connector enabling a complete desktop experience

• Angstrom (Open Embedded)
• Debian
• Ubuntu
• Gentoo