Board Type	Single Sided
Power	50W+50W
Brand	DHRUV-PRO
Type of Tension	AC
Frequency	50 Hz
Model Number	OEP50W

Our company is highly rated in offering Dual Channel Audio Power Amplifier Board.

Model Name/Number	TDA7498 Dual Channel 100W
Power	DC 8-32V
Channel	Dual Channel
Color	MULTI

Sound quality is very good and it can drive 4/6/8 ohm speakers. It has sufficient power output 2*100W.

Features:
Great digital amplifier for use.
Sound quality is very good by using this module.
Two-channel stereo, 2*100W power output.
Applicable speaker impedance: 4/6/8 ohm(8 ohm is the best).

Specifications:
Power Voltage: DC 8-32V
Applicable Speaker Impedance: 4/6/8 ohm(8 ohm is the best)
Output Power: 2*100W
Number of Channels: Dual-channel Stereo
PCB Board Size: 75 * 50mm / 2.95 * 1.97in
Weight: 63g / 2.22oz
Package Size: Approx. 14.5 * 10 * 3cm / 5.7 * .94 * 1.18in

Usage/Application	Subwoofer Amplifier Board 12V-24V Power
Power	50Wx2+100W

Features: Adopts two high quality TPA3116D2 digital amplifier chips. Sound quality is very good, high efficiency and amplifying power. 50W*2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat. Powered by DC 12-24V, wide input voltage. User can adjust the volume by themselves easily. Applicable speaker impedance: 4-8 ohm. Just connect the power supply and loudspeaker box, enjoy the pure digital music! Power Supply Setup A single power supply is required to power up the EVM. Because most of the pins are PVCC compliant, the PVCC supply also can be used to power the analog supply (AVCC) and can be used to pull up the logic pins for shutdown (SD) control and fault detection (FAULT). GVDD is an internally generated supply for the output FETs and also is used to power the PLIMIT voltage divider circuit on the EVM. PLIMIT is GVDD compliant, but not PVCC compliant. PLIMIT also can be powered by an external supply connected to the PLIMIT pin. (suggested 24V) 4A (max 8A) Current Requirement: Connect according to Speaker Watt Amp = Speaker Watt / Supply Voltage Connect the external regulated power supply adjusted from 12 V to 26 V to the module PVCC and GND banana jacks, take care to observe marked polarity.

Usage/Application	amplifire board
Power	12-24V power supply 50+50w

DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 2*50W+100W

Note: Aux insert will automatically detect.
When aux is inserted, Bluetooth will break, aux priority, audio is input, not mixed.
Product description:
1.This is a support for Bluetooth audio receiver board, with preamp amplification, bass frequency processing. With bass, left and right channel volume adjustment, treble adjustment, the total volume potentiometer control 2.1 amplifier board.
2.DC power supply 12-24V power supply, maximum support 50W (left channel) +50 W (right channel) +100 W (bass channel) three-channel output.
3. Use of the United States TI company TPA3116D2 digital amplifier chip as the core, a parallel bridge subwoofer output, do a left and right channel output.
4..Wide operating voltage efficiency up to 90%. Can use good performance switching power supply, laptop switching power supply, you can also use the charging bottle, or car power supply, etc.
???5.Bluetooth 4.2 version.
The main product parameters:
Size (L * W * H): 101 x 100 x 25mm, excluding potentiometer and socket projection Operating voltage range: DC 11-25V (current 3-4A, or 19-24V / 4-5A, such as high power requirements 20-24V / 8-9A above)
Bluetooth receiving distance:> 8 m (meters)
Audio input sensitivity: 600-800mV
Frequency response range: 20Hz-20KHz
Speaker impedance: left and right channel speakers: 4-8 ohm, bass speaker impedance: 2-8 ohm
Function switch Instructions for use:
1. Plug in the power on default Bluetooth mode
2. Bluetooth disconnected, long press the switch can switch to the audio input mode
3. Bluetooth play status, short press the switch to pause / play
Note:When aux is inserted, Bluetooth will break, aux priority, audio is input, not mixed
Package included:
1PC TPA3116 Subwoofer Amplifier Board

Size: tda7498 100w+100w features: 100w+100w dual-btl class-d audio amplifier with single power supply amplifier chip: tda7498 wide range single power supply: 15-34vdc(recommended 24v) output power: 100w+100w (vcc = 36 v, rl = 6ω, thd: 10%) output power: 80w+80w (vcc = 34 v, rl = 8ω, thd: 10%) speaker impedance: 4-8 ohm (8 ohm best, 4 ohm or 6 ohm also works) four fixed gain settings available: 25. 6 db, 31. 6 db, 35. 1 db and 37. 6 db adopts differential input tomon-mode noise protection: short-circuit protection, over temperature protection with standby and mute features high efficiency: 90% note: packaging with exposed pad up (epu), more convenient to mount a separate heatsink mode: three kinds of modes avaliable: standby/ mute/ normal working mode standby mode-all circuits closed, at a low power state; mute mode-all input signals connects ground, the duty cycle of forward/backward pwm output signal is 50%; normal working mode-the amplifier module works normally. Package includes: 1 x tda7498 2x100w audio amplifier board

Brand	DHRUV-PRO
Model Number	PAM8610
Power	7V-15V
Number Of Channel	2
Type	Digital
Usage	In Electronic Components

Matching up with the ever increasing requirements of the customers, our company is engaged in providing Amplifier Board Miniature Module.

Model Name/Number	XH-M543
Power	120w*2
Brand	DHRUV-PRO
Channel	DUAL CHANNEL
Color	MULTI
Usage/Application	FOR CAR VEHICLE COMPUTER SPEAKER DIY HOME THEATER AUDIO SYSTEM

Description: Features: High Efficiency: Power amplifier chip TPA3116D2 with more than 90% of the power efficiency and low idle loss characteristics,the calorific value is very small. High-level modulation system configuration: Advanced level reduces the number of components, integrated self-protection circuit, including over voltage, under voltage, overheating, DC detection and short circuit protection, heat-resistant package. Heat Dissipation: Big heat sink chip on the surface of the amplify module,The heat sink is with array construction which is more easy for heat dissipation. Convenient Use: European style 3P wiring terminals,attach a dedicated audio terminal cable of approximately 30 cm in length for easy access. Multipurpose: This product is suitable for shop to attract customers, family audio and video, and empty square. Specifications: Material: PCB Model: XH-M543 Chip Type: TPA3116D2 Working Voltage: DC12-26V Current Supply: >3A Output Power: 120*2W MAX, DC12V, 2*50W,DC24V, 2*120W Signal to Noise Ratio: 100db Channel: Dual Channel Stereo Item Size: 92*68*14mm / 3.62*2.68*0.55in Item Weight: 70g / 2.47oz  Package Weight: 74g / 2.61oz Package Size: 145*90*15mm / 5.71*3.54*0.59in Package List: 1 * Audio Amplifier Board 1 * Cable

Brand	DHRUV-PRO
Part Number	TPA3110
Usage	Digital Audio Stereo Amplifier Module Board Mini Binaural
Output Power	2 X 15W
Working Voltage	DC 8-24V
Working Current	Max3A

Audio Stereo Amplifier Module

Model Name/Number	TDA7492P 2x50w
Brand	DHRUV-PRO
Channel	Dual Channel
Color	MULTI

tyle:50W 50W TDA7492P  |  Color:50W+50W Blue TDA7492P

Power: 2.1 interface 8 ~ 24V DC power supply
Audio input: stereo input various versions of the Bluetooth connection,
using CSR8635 Bluetooth chip, Bluetooth V4.0, high software compatibility
Output Impedance: 8 ohms Best(4,6,8,16 ohm
impedance can drive speakers)
Output Power: Add pre-5532 output foot (powered 25V ,6-ohm
impedance output 2 X 50W, 8 ohm
impedance output 2X40W dual-channel)
TDA7492 digital amplifier chip, designed to optimize the circuit layout,
the sound quality is very good, big power
DIP switches can be adjusted directly after the amp gain more respect and better promote greater damping horn

Brand	DHRUV-PRO
Part Number	TDA8954 420W + 420W
Color	Multi color

Working method: Class D Quiescent current: 65mA Work efficiency: 90% rated Output power: 2*420W Frequency response: 20Hz to 20KHz Working voltage: AC20V to AC26V Recommended power supply voltage: 300W AC24V-0-AC24V Board size: 180*120*38MM