• 5S 15A BMS Charge protection Circuit.
• Can be used in 3.7V rated Li-ION Battery not for 3.2V Rated LiFePO4.
• Common Port for charge/discharge
• Long time short circuit of the load won’t affect the PCB and the battery.
• Supply Voltage:18.5V Dissipation Power:15A

• VERY IMP NOTE : Once all connections are done between battery pack and BMS, please give a initial charge to the battery pack first to activate the BMS.
• Number of Cells: 4, Model: YH11047A
• Normal Current: 15A, Peak Current: 30A
• Over Charge Voltage Range: 4.25-4.35V
• Over Discharge Voltage Range: 2.5-3.0V

• BMS 13S 20A same port with balance.
• It protective integrated circuit IC.
• Battery Management System for NMC 3.7V 13S Series.
• The circuit is simple and reliable
• 48V Lithium-ion Battery Pack  

BMS 13S 20A same port with balance waterproof PCM/PCBA Battery Management System for NMC 3.7V 13S Series 48V Lithium-ion Battery.

• 1. Model: XH-M6032. Input Voltage: DC 10-30V3. Display Precision: 0.1V4. Control Precision: 0.1V5. Output Type: directly output6. Voltage Tolerance: ±0.1V7. Application Fields: 12-24V storage battery (Applicable to solar cells, new energy batteries, Lead-acid
• 2. Batteries, nickel-cadmium batteries, nickel-metal hydride batteries, lithium-ion batteries, polymer batteries, Car battery, electric car battery)8. Need connected to battery, or it won't be displayed.9. Size: 82 x 58 x 18mm1. Automatic control circuit connection2
• 3. Automatic charging and power off3. Real-time voltage monitor4. Auto save setting5. ST core chip6. LM2596 switch voltage regulatorUsing method:1. Set Starting Voltage: in normal display voltage state,press the button will display start charging voltage;long press fo
• 4. r 3s the digital tube will flash: you can start or stop button to set starting up charge voltage value.2. Set Stop Voltage: in normal display voltage state,press the button will display stoping charge voltage;long press the button for 3s the digital tube will flash;y
• 5. You can start or stop button to set stoping charge voltage value.3. Factory Reset: in power on state press the start/stop button at the same time,digital tube will display 888;that represents factory reset settings.Package included:1 x XH-M603 charging control module

DHRUVPRO HX3S 18650 3S 12V 25A BMS Protection PCB Board Lithium Li-ion Battery

• VERY IMP NOTE : Once all connections are done between battery pack and BMS, please give a initial charge to the battery pack first to activate the BMS.
• Number of Cells: 3, Working Current: 5-8A
• Peak Current: 10A
• Over Charge Voltage Range: 4.25-4.35V ± 0.05V
• Over Discharge Voltage Range: 2.5-3.0V ± 0.05V

• APPEARANCE---Charge Voltage:21V;Charge Current:15A(Max.);Discharge Current:15A(Max.);Momentary Discharge Current:25A
• This product will be an excellent pick for you
• APPLY---The protection board is for 5 series cell Li-ion batteries of electric power tool,18650,etc;Stable various charging and discharging protective functions are great for 5S battery protection
• BATTERY---Choosing the correct protection board and applying it appropriately is vital to the longevity your batteries

• Model Number - li-ion 4s 12v 40a common with balance.
• Strong load ability, constant discharge current 10A/25/35A/45A/60A , use high voltage resistance, low inner.
• The bms lifepo4 4s 12v 40A 12.8V lithium battery protection.
• It protective integrated circuit IC.
• IC itself has power balancing function. The circuit is simple and reliable. 

• PCB input voltage: 12-24V
• T12 DIY Digital Soldering Iron Station Temperature Controller Board.
• PCB Size: 6.7 x 2.5 x 2.3cm
• Easy to use. 

STC T12 DIY Digital Soldering Iron Station Temperature Controller Board Kit for T12 T2 Handle