Dr. Fixit (A Division Of Pidilite Industries Limited)

Packaging Size	3 & 15 kg
Brand	Dr Fixit
Coverage	Approximately 0.6-0.75 m2/kg at 1 mm thickness in 2 coats
Physical State	2 component (1 part polymer &2 part powder)
Pot life of the Mix	40-45 (30 Degree C in minutes)
Water Permeability	Excellent-no leakage observed after 24 hrs
Wet Density of the Mix	1.65-1.75
pH of the Mix	10.0-12.0
Elongation at Break	50-60% (at DFT of 1 mm)

Two-Component Cementitious Waer Proof coating For Bathrooms & Wet areas

Dr. Fixit Bathseal 2K is a two-component cementitious, polymer modified elastomeric, waterproofing coating composed of cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates, typically in wet areas such as bathrooms, kitchen sinks, etc.

Areas of Application:

• Dr. Fixit Bathseal 2K must be applied to new or old concrete substrates that are structurally sound and properly levelled.
• The sunken portion of bathroom & toilet
• Kitchen sink areas

Features & Benefits:

• Elastomeric – elastomeric flexible coating that accommodates cracks up to 2 mm with an elasticity of 40-50%
• Low water permeability – excellent resistance to ingress of water
• Adhesion – excellent adhesion to concrete and masonry surfaces
• User-friendly – Ease of application by brush or roller

Precautions & Limitations:

• Do not part mix. Mix the entire quantity of both the components at one go.
• Do not dilute with water.
• Always add a powder to liquid to avoid lump formation.
• Do not cure by flooding with water.
• Cure the membrane with a moist hessian cloth
• Do not conduct any ponding test before it is completely cured.

Shelf Life & Storage:

• Store in a shed, protecting from direct sunlight and away from extreme temperature.
• In extremely hot temperature conditions, store in a temperature-controlled environment i.e. less than 30 Degree C.

Health & Safety Precautions:

• Dr. Fixit Bathseal 2K is alkaline and should not come into contact with skin or eyes.
• Avoid inhalation of dust during mixing.
• Gloves, goggles and dust masks should be worn, during mixing and handling the product.
• Any contact to eyes should be washed immediately with clean water and seek medical advice

Other Products Categories available:

• Dr. Fixit brings you the widest range of Construction Chemicals

Brand	Dr Fixit
Packaging Size	5 kg
Coverage	1kg of Dr. Fixit Bathseal Grout can theoretically fill a volume of approximately 0.50 litres.
Color	Grey
Appearance	Free flowing powder
Compressive Strength	1day-150kg/ sq.cm,7days-300kg/sq.cm,28days-500kg/sq.cm
Setting Time	5 to 6 hours ( at 30 Degree C )
Shelf Life	6 months from the date of manufacturing in unopened condition.
Standards	ASTM C 109 - 1999 18,ASTM C 1107,Grade C
Water to Powder Ratio	650 ml to 800 ml for 5 kg bag,130 ml to 160 ml for 1 kg grout mix

Dr. Fixit Bathseal Grout is composed of high-quality portland cement, properly selected & graded dry aggregates & additives. It is ready to use powder to be mix with water while application. It is used to fill gaps around pipe inserts in wet areas and bathroom walls & sunken portions, etc., which are vulnerable to leakage.

Standard compliance / Specification:

• Meets the requirements of ASTM-C-1107, Grade C

Areas of Application:

Dr. Fixit Bathseal Grout is recommended for grouting of gaps around:

• Nahani traps
• Sanitary pipe inserts in masonry/concrete
• Sewage pipes & down take pipes in buildings roof parapets
• Water carrying pipelines

Features & Benefits:

• Flowability - Highly fluid and pourable into gaps; extremely easy to apply. Retains a good degree of flowability for about 30 minutes
• Strength - Achieves quick strength; enables plumbers to work quicker with fittings
• Shrinkage - Non- shrink making the gaps water-tight
• Compatibility - Good bond with masonry, concrete, etc.

Precautions & Limitations:

• Do not over dilute
• Cure normally
• Addition of water shall be strictly observed. The range mentioned below is for adjustment of a convenient flowability into the gaps on site.

Shelf Life & Storage:

• Store in a cool & dry place, away from moisture.

Health & Safety Precautions:

• Use rubber hand gloves & safety goggles, while using Dr. Fixit Bathseal Grout.
• In case of contact with skin, wash with plenty of water.
• Keep out of reach of children

Other Products Categories available:

• Dr. Fixit brings you the widest range of Construction Chemicals

Brand	Dr Fixit
Packaging Size	1 U (100 mm x 10 m)
Shelf Life	24 months from the date of manufacturing in unopened condition.
Elongation	Greater Than 500% (Compound)
Appearance	Black colour Bitumen tape with Silicone release paper on both side
Roll Length	10 m
Roll Width	100 mm
Membrane Thickness	1.5 mm
Softening Point	Greater Than 60 Degree C (R&B)
Water Absorption	Less Than 0.3 at 24 hrs
Adhesion Strength	Primed surface 1.0 N /mm,Self 1.0 N /mm
Crack Bridging Ability	Greater Than 1.5 mm
Cold Temperature Flexibility	Greater Than 6 Degree C

Dr. Fixit Bathseal Tape is a non reinforced twin side adhesive bitumen membrane which comprises polymerized bitu men sandwiched between a plastic released films on either side.

Typical Application:

• Dr. Fixit Bathseal Tape is mainly used for providing a seamless waterproofing membrane on concrete, wood, metal surfaces. Most ideal for wrapping around the pipes that are inserted through concrete slabs and brick masonry walls in wet areas.

Features:

• Cold applied, self-adhesive and easy to apply.
• Bitumen to bitumen adhesion on the laps provides a seamless layer.
• Excellent adhesion to metals, PVC, wood, cementitious materials etc.
• Improved heat resistance.
• Excellent resistance to chlorides, sulfates, dilute acids and alkalis’.
• Water and vapor proof.

Handling:

• Dr. Fixit Bathseal Tape membranes are supplied in rolls of 10 m length and 1 m width. The membranes can be unloaded by hand or other convenient means but making sure the absence of any protruded sharp edges nearby to avoid punctures.

Storage:

• Dr. Fixit Bathseal Tape should be stored in a shaded area on wooden pallets neatly covered by any thick fabric like tarpaulin sheets tied and secured properly to ensure no exposure to sunlight.

Disposal:

• Dr. Fixit Bathseal Tape is a non-hazardous, non-flammable material and therefore can be disposed of as a regular disposable material.

Health and safety:

• Dr. Fixit Bathseal Tape contains a tacky bitumen compound which while applied can adhere to human skin. Such stains of bitumen can be removed by using a cloth dipped in light solvents. In case the affected area is sensitive like the eye pls seek medical help.

Shelf Life:

• Store in a cool & dry place, away from moisture.

Other Products Categories available:

• Dr. Fixit brings you the widest range of Construction Chemicals