X
View Mobile Number 63% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Our Products

+View All

Dr. Fixit External Walls Waterproofing Solutions

Recommended Solution:
Use Dr. Fixit Raincoat for waterproofing and decorative purposes. How does it assist in waterproofing exterior walls? Take a look at its features.
  • Twice as thick as normal paint
  • Resistant to algae and fungus
  • Available in more than 700 shades
  • Free preview and site trails

Conventional Method:
  • External walls are painted at regular intervals with normal acrylic paints. This lends a decorative finish only, which has a film thickness of just 5060 microns. Thus, it does not resist the formation of cracks, resulting in leakages.

Budget Solution:
  • All you need is waterproofing exterior walls products that are effective and affordable. For this, we recommend using Dr. Fixit Soyseal Raincoat. It prevents water from seeping into the walls. Thus, your walls won’t rot due to moisture.

FAQ'S
Q. What is the need for waterproofing exterior foundation walls?
  • Solution: Dr. Fixit CrackX Shrink-free All plaster cracks should be repaired with Dr. Fixit CrackX Shrink free

Q. I live in a bungalow. How do I protect its rain-lashed external walls? Do I waterproof the wall and then use acrylic paint over the same surface?
  • No, you don’t need acrylic decorative paint, which fails under the monsoon fury. Dr. Fixit Raincoat is a waterproof cum decorative exterior coating which builds a film of 110120-micron thickness. It easily repels the rainwater away and creates the waterproofing barrier. This serves among the top-notch and essential waterproofing exterior walls products. It comes in 700+ shades to choose from. You can also the Preview Service by calling 1800 209 5504 or write to info@drfixit.co.in

Q. What is the difference between paints and coatings available in the market? Which do you recommend as a superior solution?
  • The word “Coating” indicates that it is protective in nature, while “Paint” implies aesthetics or decoration. A coating film has the higher thickness, flexibility, and breathable properties. This is something you need when waterproofing for new external walls.
  • The coatings are much tougher compared to any conventional paint film. The best part is that it protects the structure from natural elements for a prolonged period.
+ Read More

Dr. Fixit Polyplus CP Waterproofing Coating
Interested in this product?
Get Best Quote
BrandDr Fixit
Bulk Density1.35 to 1.55 g/cc
AppearanceGrey powder
pH Value11 - 14 (mixed with water 11)
Shelf Life12 months from the date of manufacturing in unopened conditions. Store in a cool & dry place
Water PermeabilityNil (BS En 12390 Part 8 2000)
Water Pressure Head40 - 50 mtr
Particle Size40-150 Micron
Penetration Rate5 mm / week
Theoretical Coverage1.5 - 1.6 kg p sq. mt in two coats

Dr.Fixit POLYPLUS CP is composed of high-quality cement, properly selected & graded inert aggregates, proprietary waterproofing active chemicals & additives. It is used as a chemically active waterproofing treatment for concrete. Dr. Fixit POLYPLUS CP when mixed with water and applied as a brush coat to concrete, it penetrates deeply into the capillaries of the concrete & protects it against the permeability of water.

Typical Application:

Water Retaining Structures:
  • Water tanks & reservoirs
  • Swimming pools
  • Water treatment works
  • Dams & canals
  • Concrete pipes
  • Harbours

Water Excluding Structures:
  • Foundation & Basements
  • Tunnels, subways & stations
  • Inspection pits & lifts shafts
  • Retaining walls & sea defense walls
  • Construction Joints
  • Bridge Decks
  • Jetties
  • Parking structures

Features:
  • Chemical resistance – Resist chemical attack (pH 3-11 constant contact, pH 2-12 intermittent contact) and provides a range of protection from freeze/ thaw cycles, aggressive subsoil waters, sea water, carbonates, chlorides, sulfates, and nitrates.
  • Application advantage – Does not require protective plaster, applicable over SSD & wet surface.
  • Waterproofing - Stops water movement through concrete, becomes an integral part of the structure.
  • Corrosion - Protects reinforcing steel against corrosion.
  • Sealing - Waterproofs minor cracking & seals shrinkage cracks up to 0.4 mm width.
  • Permeability – Resists permeation of water from the positive & negative side of the concrete.
  • Chemical activation - It’s waterproofing capability increases with time. i.e. It remains permanently active.
  • Abrasion - Does not get affected by surface wear or abrasion, once the penetration is complete.
  • Hydrostatic pressure - Treated concrete withstands hydrostatic water pressure up to a 15-meter head.
  • Ease of application - Easy in an application, only to be mixed with water at the site.
  • Protection - Protects concrete against contaminated water & corrosion.
  • Monolithic – Forms monolithic layer with the concrete & becomes an integral part of the concrete.
  • Crack bridging – Can bridge cracks up to 0.5 mm

Precautions & Limitations:
  • An application can be done under normal temperature conditions.
  • Heavy traffic should be avoided until the surface is hardened for at least 5 days.
  • Finishes containing portland cement may be applied over Dr. Fixit POLYPLUS CP after 3 to 4 hours.
  • Any paint or coating should be applied after 28 days only, over Dr. Fixit POLYPLUS CP application, after thorough wire brushing, washing & removing any Dr. Fixit POLYPLUS CP residual on a surface.
  • Not recommended over moving joints and structures subjected to movements.
  • Do not apply on a dry substrate.
  • Water tanks, etc., can be carefully filled with water after 3 to 7 days. Do not fill large tanks faster than 6.5 feet per hour (2 m/24 hrs).
  • After complete curing of Dr. Fixit POLYPLUS CP, potable water tanks should be thoroughly rinsed with potable water prior to being placed in service.

View Complete Details

Yes, I am interested!

  • Dr. Fixit Krystalline (25kg) Waterproofing Coating
  • Dr. Fixit Krystalline (25kg) Waterproofing Coating
Dr. Fixit Krystalline (25kg) Waterproofing Coating
Interested in this product?
Get Best Quote
BrandDr Fixit
Coverage1.4 - 1.6 sq. m/ Kg in single coat
FormLiquid
Shelf Life12 months from date of manufacturing,store in unopened condition in cool and dry place.
Packaging1 kg,5 kg,25 kg

Dr. Fixit Krystalline is composed of high-quality cement, properly selected & graded inert aggregates, proprietary waterproofing active chemicals & additives. It is used as a chemically active waterproofing treatment for concrete. Dr. Fixit Krystalline when mixed with water and applied as a brush coat to concrete, it penetrates deeply into the capillaries of the concrete & protects it against the permeability of water. Not recommended for leaking cracks in concrete.

Benefits:
  • Stops water movement by developing crystals in concrete capillaries
  • Does not require protective plaster, applicable over SSD & wet surface
  • Can be applied from the positive & negative side of the concrete
  • Easy to apply, only to be mixed with water at a site

Areas of Application:

Water Retaining Structures:
  • Water tanks & reservoirs
  • Water treatment works
  • Concrete pipes
  • Swimming pools
  • Dams & canals
  • Harbours

Water Excluding Structures:

Foundation & Basements:
  • Tunnels & subways
  • Inspection pits & lifts shafts
  • Construction Joints
  • Bridge Decks
  • Parking structures

View Complete Details

Yes, I am interested!

  • Dr. Fixit Raincoat Cool Waterproofing Coating
  • Dr. Fixit Raincoat Cool Waterproofing Coating
Dr. Fixit Raincoat Cool Waterproofing Coating
Interested in this product?
Get Best Quote
BrandDr Fixit
Packaging Size4 and 20 litre
Coverage3.0 to 3.5 m 2 per litre for 2 coats
Elongation150%
Tensile Strength1.1 N/mm2
Shelf Life24 months from the date of manufacturing in unopened conditions.
Physical StateSingle Component Liquid
Dry Film Thickness160 micron (DFT)
Solar Reflectance Index110
Solid Content56%
Accelerated WeatheringPasses (2000 hrs UV exposure)
Adhesion to Concrete Surface4A
Algae and Fungal ResistanceExcellent
Anti CarbonationPasses
Crack Bridging Index0.5 mm Passes

The solar reflective exterior waterproof coating

Features and Benefits:
  • Solar Reflective: Reradiates most of solar heat back into the atmosphere, thus lowers the surface temperature.
  • Solar Reflective Index SRI: 110
  • Complies to Singapore Std SS500: 2002, Specification for Elastomeric wall coating
  • Complies to GS 11 VOC standard
  • Durability: Provides long time protection to building that is endangered due to thermal degradation
  • Waterproofing: Excellent waterproofing increases the durability of a structure
  • Shades: Available in wide range of pastel shades
  • Elastomeric: High elasticity withstands stress caused by thermal expansion & contraction.
  • Microbial resistance: Resistance to fungus and algae growth, hence maintains the aesthetic of buildings.
  • Eco-friendly: Non-Toxic water-based system
  • Energy Saving: Low heat transfer into building hence reduction in electrical consumption
  • Ready to use: No dilution is required.
  • Substrate temperature reduction up to 8 Degree C.

Dr. Fixit Raincoat Coool is a heat reducing & ‘Energy Saving’ acrylic waterproofing coating. It is composed of specially selected reflective additives, light fast & weather durable pigments & graded inert fillers. It is a solar reflective coating on exterior walls which helps in reduction of enery usages by less heat transfer into buildings & keeps the interiors cool. The coating serves the dual purpose of thermal reduction & with additional waterproofing protection.

Areas of Application:
  • All types of exterior masonry surfaces, concrete, cement sand renderings, etc.

Precautions & Limitations:
  • Do not dilute.
  • Always to be kept as the final coat. i.e. No overcoating on Dr. Fixit Raincoat Coool.
  • Do not apply when the ambient temperature is below 10°C or above 45°C.
  • Do not apply in direct sunlight or during rains. Adhesion property may get affected over putty and very smooth surfaces.

Shelf Life & Storage:
  • Store in a cool and dry place.
  • Keep away from direct sunlight and heat.

Health & Safety Precautions:
  • Skin Contact: Wash skin with soap & water. Remove contaminated clothes.
  • On eye contact: Immediately splash eyes with plenty of water. Consult Physician if irritation persists.
  • Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a Physician.

Other Products Categories available:
  • Dr. Fixit brings you the widest range of Construction Chemicals

View Complete Details

Yes, I am interested!

  • Dr. Fixit Rainguard Grey (6 X 1Ltr) Waterproofing Coating
  • Dr. Fixit Rainguard Grey (6 X 1Ltr) Waterproofing Coating
Dr. Fixit Rainguard Grey (6 X 1Ltr) Waterproofing Coating
Interested in this product?
Get Best Quote

Dr. Fixit Rainguard Grey (6 X 1Ltr) Waterproofing Coating

Rs 340 / UnitGet Latest Price

Watch Video

BrandDr Fixit
Packaging Size6x1 ltr
CategoryWaterproofing Coating
Physical StateLiquid

We are offering Dr. Fixit Rainguard Grey (6 X 1Ltr) Waterproofing Coating to our clients.

View Complete Details

Yes, I am interested!

  • Dr. Fixit Super Roofkote Waterproofing Coating
  • Dr. Fixit Super Roofkote Waterproofing Coating
Dr. Fixit Super Roofkote Waterproofing Coating
Interested in this product?
Get Best Quote
Specific Gravity1.1
Coverage1.5 kg./m2
AppearanceGreyish black smooth cream
BrandDr Fixit
Packaging Size18 kgs. pail,200 kgs. drum
Water Permeability2.5 gm/m2 /24 hrs
Adhesion to Substrate0.5 N/mm2
Crack Bridging2 mm Passed
Heat Flow ResistanceAt 120 Degree C Not Flow
Drying Time1-3 hrs.

DR.Fixit Super Roofkote is a water-based synthetic rubber modified bitumen emulsion developed especially for high-performance waterproofing application. It can be applied to a surface of any form or shape. After application, Dr.Fixit Super Roofkote will form a dry film with highly elastic waterproofing seamless membrane covering the whole area. With its high elasticity and good adhesion to substrate properties, the film is able to accommodate the roof and building movement over a wide range of temperatures.

Area Of Application:
  • Roof
  • Basement, Underground structure
  • Bathroom
  • Wet areas etc.

Features And Benefits:
  • High Elongation
  • Atmospheric & Temperature Stable
  • Vapour Permeable
  • Water Base, Solvent free
  • Seamless waterproofing membrane
  • High Elastomeric,
  • Excellence crack bridging

View Complete Details

Yes, I am interested!

Dr. Fixit Concrete Guard Midtone Base Waterproofing Coating 20 Liter
Interested in this product?
Get Best Quote
BrandDr Fixit
FormLiquid
UsageIndustrial
TypeWater Based Anti Carbonation Coating
Packing Size20 Litre

We are offering Dr. Fixit Concrete Guard Midtone Base Waterproofing Coating 20 Litre to our clients.

View Complete Details

Yes, I am interested!

Dr. Fixit Powercrete (50kg) Waterproofing Coating
Interested in this product?
Get Best Quote
CoverageCoating/slurry mix proportion 100 kg cement 50 kg dr. fixit powercrete polymer
pH ValueGreater Than 7
Shelf Life12 months date of manufacture when in sealed pack and stored under proper condition.
Packaging Type1,5,20 & 50 kg container
Flexural Strength10% to 15 dosage,20 to 21 kg/cm 2
BrandDr Fixit
Application TemperatureAbove 7 to 45 Degree C
Area of ApplicationWater proofing and repairs for cementitious substrate.
Controlled Sample19 kg/cm 2
Dosage for PMM10-15% by weight of cement
Mix Ratio for Waterproofing Coating1 2 ( Powercrete Cement )
Permeability TestPassed
Pull off StrengthExcellent
StorageStore in cool place in unopened container
Waterproofing Thickness dft1.20mm - two coats

A powerful coating system for waterproofing and repairs:
  • An acrylic polymer based economical elastomeric waterproofing system for protecting concrete & masonry surfaces.

Areas of Application:
  • Concrete structures like sunken portion, toilets, balcony, basement, chajjahs, terrace, concrete repairs, and water retaining structures.

Features & Benefits:
  • A tough, hard wearing, breathable waterproofing system for residential, industrial, housing and commercial buildings.
  • Can be applied in the uniform thickness to horizontal and vertical surfaces.
  • Excellent bond to most building materials.
  • Reduces or prevents salt penetration into concrete.
  • High ultra voilet resistance.
  • Highly durable.
  • Economical system.
  • Is non-flammable and does not give off toxic gases, when exposed to fire.

Precaution:
  • Dr.Fixit power creates should not be used in isolation of cement.
  • Dr.Fixit power create shall be applied to the substrate temp above 10 o C to below 40 o C
  • Ensure to provide a protective plaster over the final coat to avoid mechanical damage.

For Repair Works:
  • Modified mortars: All the repair mortar modified with dr. fixit power create shall be used for all renovation works in a concrete substrate.
  • Add 10-15% of dr. fixit powercrete by weight of cement to the prepared mix of cement and sand mortar in a ratio of 1:3 and repair all the patchwork as per the suitability of the job.

View Complete Details

Yes, I am interested!

Dr. Fixit Crack-X Shrinkfree Waterproofing Coating
Interested in this product?
Get Best Quote
Packaging Size1 to 5 Ltr
BrandDr Fixit
Coverage30-34 running meter per ltr for a depth & width of 5 mm
Specific Gravity0.0.26 +/-0.02
Shelf Life12 months from the date of manufacturing. Store in cool & dry place,away from sun light.
AppearanceWhite paste
BaseAcrylic with specially added fillers
Drying Time5-6 Hrs (At 30 Degree C)
Full Curing Time7 Days (At 30 Degree C)

100% shrink-free crack filler for cracks up to 10 mm
One-time ready to use, crack filler for all plastered surfaces for internal & external cracks up to 10 mm width & depth that prevents water leakage through cracks. It does not shrink after curing, dries fast & bonds strongly to cementitious substrates.

Dr. Fixit Crack-X Shrink-free is composed of quality polymers, select fillers & additives. It is fast drying and flexible, lightweight, putty-like material used for filling cracks in plastered surfaces. It is 100% shrink-free, water-resistant after drying & bonds strongly to cementitious substrates

Areas of Application:
  • Internal & external surface cracks on plaster up to 10 mm width.

Features & Benefits:
  • Shrinkage– Non-shrink even after curing, prevents from cohesive & adhesive failure on exposure.
  • Application– Applied as one-time filling (does not require second time application, as required in other acrylic sealants).
  • User-friendly– One pack, very soft paste, easily applicable by fingers or putty knife.
  • Sagging– Non-sag nature helps in filling of vertical & overhead cracks.
  • Sanding– No sanding is required.
  • Staining– Does not migrate any liquid component into concrete surface thus prevents staining.
  • Adhesion– Excellent adhesion to cementitious surfaces prevents water leakages through the cracks.
  • Durability– UV & weather resistance properties increase the life expectancy of the surface.
  • Paintability– Easily paintable after 5-6 hours of application.
  • Non-toxic- It is non-toxic hence user-friendly

Precautions & limitations:
  • Not for cracks in POP or painter’s putty.
  • Not recommended to use under the rain.
  • Not meant for structural cracks in concrete, slab, construction joints.
  • Jet or Power washing on walls not advisable prior to application.
  • During application below 10°C, drying time will be delayed.
  • Container to be tightly closed after application.
  • If filler compound becomes too dry, add potable water in the ratio of 1 teaspoon in 250 ml of Dr. Fixit Crack-X Shrink-free.

Health & Safety Precautions:
  • As with all chemical products, caution should always be exercised.
  • Protective clothing, such as gloves and goggles, should be worn (see packaging for specific instructions).
  • Treat any contact to the skin or eyes with fresh water immediately.
  • Should any of the products be accidentally swallowed, do not induce vomiting but call for medical assistance
  • immediately.
  • Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. reseal all containers after use and ensure a product is stored as instructed on the safety section of the labeling.

View Complete Details

Yes, I am interested!

Dr. Fixit 217 Crack-X Shrinkfree Waterproofing Coating
Interested in this product?
Get Best Quote
Packaging Size1 Ltr
Coverage30-34 running meter per ltr for a depth & width of 5 mm
AppearanceWhite paste
BrandDr Fixit
Shelf Life12 months from the date of manufacturing. Store in cool & dry place,away from sun light.
Specific Gravity0.0.26 +/-0.02
BaseAcrylic with specially added fillers
Drying Time5-6 Hrs (At 30 Degree C)
Full Curing Time7 Days (At 30 Degree C)

Dr. Fixit Crack-X Shrinkfree is composed of quality polymers, select fillers & additives. It is fast drying and flexible, lightweight, putty-like material used for filling cracks in plastered surfaces. It is 100% shrink-free, water-resistant after drying & bonds strongly to cementitious substrates.

Areas of Application:
  • Internal & external surface cracks on plaster up to 10 mm width.

Features & Benefits
  • Shrinkage –non-shrink even after curing, prevents from cohesive & adhesive failure on exposure.
  • Application – applied as one-time filling (does not require second time application, as required in other acrylic sealants).
  • User-friendly – One pack, very soft paste, easily applicable by fingers or putty knife.
  • Sagging – non-sag nature helps in filling of vertical & overhead cracks.
  • Sanding – no sanding is required.
  • Staining – Does not migrate any liquid component into concrete surface thus prevents staining.
  • Adhesion – excellent adhesion to cementitious surfaces prevents water leakages through the cracks.
  • Durability – UV & weather resistance properties increase the life expectancy of the surface.
  • Non-toxic – it is non-toxic hence user-friendly
  • Paintability – easily paintable after 5-6 hours of application.

Method of Application:

Surface Preparation:
  • Surface must be free from dust, oil, grease, and loose particles, etc. moisten the surface before applying Dr. Fixit Crack-X Shrinkfree.
  • fine hairline cracks must be widened up to 1 mm minimum and then filled.
  • for filling Dr. Fixit Crack-X Shrinkfree on the internal surfaces, existing POP or painter’s putty must be removed till plaster surface is exposed.

Application:
  • Press Dr. Fixit Crack-X Shrinkfree firmly into the crack One time OnlY with a spatula or putty knife and level the surface.
  • handball application can also be used as per the convenience.
  • Care must be taken to avoid the formation of cavities or bubbles during application.
  • Allow it to dry in ambient conditions for 5-6 hrs before painting. for best results 7 days air curing is advised.
  • further POP or painters putty application can be taken up once it is fully dry.

Cleaning:
  • Clean tools & equipment with soap & water. Wash hands with soap & warm water.

Precautions & limitations:
  • Not for cracks in POP or painter’s putty.
  • Not recommended to use under the rain.
  • Not meant for structural cracks in concrete, slab, construction joints.
  • Jet or Power washing on walls not advisable prior to application.
  • During application below 10°C, the drying time will be delayed.
  • Container to be tightly closed after application.
  • If filler compound becomes too dry, add potable water in the ratio of 1 teaspoon in 250 ml of Dr. Fixit Crack-X Shrinkfree.

Health & Safety Precautions:
  • As with all chemical products, caution should always be exercised.
  • Protective clothing, such as gloves and goggles, should be worn (see packaging for specific instructions). treat any contact to the skin or eyes with fresh water immediately.
  • Should any of the products be accidentally swallowed, do not induce vomiting but call for medical assistance immediately.
  • Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. reseal all containers after use and ensure a product is stored as instructed on the safety section of the labeling.

View Complete Details

Yes, I am interested!

Dr. Fixit Primeseal Waterproofing Coating 20 Litre
Interested in this product?
Get Best Quote
Packaging Size20 litre
BrandDr Fixit
Physical StateLiquid
Coverage8 10 sq.mtr/ ltr/ coat.

Efflorescence resistant penetrating primer

A good penetrating, pore filling primer for plastered walls, asbestos, brick, false ceiling, concrete, etc.

Benefits:
  • Good binding on chalky porous substrates before overcoating with Dr. Fixit Newcoat, Dr. Fixit Raincoat & Dr. Fixit Heatshield
  • A primer for internal and external surfaces
  • Based on chemically inert polymers, suitable for high alkaline substrates
  • Provides deep penetration thus imparts excellent substrate adhesion
  • Provides excellent efflorescence resistance
  • Dilute Dr. Fixit Primeseal with water

View Complete Details

Yes, I am interested!

  • Dr. Fixit Raincoat Waterproofing Coating
  • Dr. Fixit Raincoat Waterproofing Coating
Dr. Fixit Raincoat Waterproofing Coating
Interested in this product?
Get Best Quote
Physical StateLiquid
Shelf Life18 months from the date of manufacturing in unopened conditions.
Water Permeability68% (Reduction in water penetration at 5 bar pressure)
Specific Gravity1.29
BrandDr Fixit
AppearanceEmulsion paint (available in white & dark bases)
Rapid Chloride Penetration TestVery low (penetration of chloride ion)
Algae and Fungal ResistanceNo growth
Accelerated WeatheringNo defects (1000 hrs UV exposure)

Acrylic elastomeric exterior waterproof decorative coating for exterior walls

High-performance waterproof coating for all types of externally plastered & concrete walls, especially for the rain lashed walls. Unlike ordinary exterior paints, it provides the dual benefit of aesthetics with waterproofing property to external walls.


  • Dr. Fixit Raincoat is composed of high-quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, many additives & water as a medium.
  • It is used as a waterproofing & protective coating for exterior walls of the buildings because
  • It forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging ability, weathering durability and an excellent resistance to the growth of microorganisms.

Areas of Application:
  • All types of exterior masonry surfaces, concrete, cement sand renderings, etc.
  • Applicable to asbestos sheets.

Features & Benefits:
  • Film thickness-Higher film thickness provides resistance to the movements of structures, gives crack bridging ability & waterproofing properties.
  • Flexibility-Flexible and covers hairline cracks(up to 0.5 mm) effectively so that no ingress of water.
  • Toughness-Tough films withstand wind-driven rain.
  • Elasticity-High elasticity easily withstands stress caused by thermal expansion & contraction (>100% elongation at 110-120 micron DFT).
  • Ready to use–No dilution is required hence ensures desired film thickness built-up without affecting the performance.
  • Microbial Resistance–Resistance to fungus and algae hence maintains the aesthetic value.
  • UV Resistant–Resistance to UV (sunlight) hence coating has the longer life.
  • Dirt Pick up–Very low dirt pick up & can be cleaned easily hence maintains the aesthetics.
  • Breathability-Permeable to water vapour.
  • Ease of application– User-friendly, easily applicable by brush, roller or spray.
  • Toxicity-It is non-toxic.

Shelf life & Storage:
  • Store in a cool and dry place.
  • Keep away from direct sunlight and heat.

Health & Safety Precautions:
  • Skin contact: Wash skin with soap & water. Remove contaminated clothes.
  • On eye contact: immediately splash eyes with plenty of water. consult the physician if irritation persists.
  • Ingestion: Do not induce vomiting. never give anything by mouth to an unconscious person. call a physician.

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

Dr. Fixit (A Division Of Pidilite Industries Limited)Ramkrishna Mandir Road, PO Box 17411, Andheri East, Mumbai-400059, Maharashtra, India

Parth Desai

View Mobile Number63% Call Response Rate

Send SMS
Send Email
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
I agree to the terms and privacy policy