X
View Mobile Number

Our Products

+View All

Laboratory Apparatus

Offering you a complete choice of products which include Ring and Ball Apparatus, Swell Test Apparatus, Laboratory Vane Shear Apparatus, Direct Shear Apparatus, Vicat Apparatus and Proctor Compaction Apparatus.

Ring and Ball Apparatus
Interested in this product?
Get Best Quote

Ring and Ball Apparatus

Get Latest Price

CompanyEast India Company

For determining the temperature at which a sample of bituminous material drops specified distance when heated under prescribed conditions and loaded by 3/8 inch diameter steel ball. Two simultaneous test can be carried out. The equipment is supplied complete with beaker but without thermometer.

View Complete Details

Yes, I am interested!

Swell Test Apparatus
Interested in this product?
Get Best Quote

Swell Test Apparatus

Get Latest Price

CompanySwell Test Apparatus

It is designed to determine the swelling pressure developed by a soil specimen moulded to desired densities at known moisture contents, when soaked in water.The load applied to restrain the swelling is transferred to a load measuring proving ring through a perforated swell plate and a load transistor bar. The proving ring is attached to the lead screw of load frame, hand operated, designed for the purpose. The load frame has a worm gear arrangement for initial setting and for subsequent volume change compensation. A soaking tank is provided for saturating the specimen and the base of the mould has channels and radial grooves with connecting holes.

View Complete Details

Yes, I am interested!

Laboratory Vane Shear Apparatus
Interested in this product?
Get Best Quote
CompanyEast India Company

This is for determining the shear strength of both remoulded and undisturbed soils. It consists of a torque head adjustable in height to enable the vane to be lowered into the specimen. Rotation of the vane is by mean of a hand wheel which operates a worm gear arrangement turning the upper end of a calibrated torsion spring. Two rates of rotation are incorporated. The vane shaft is attached through the hollow upper shaft to a reset table pointer, Which indicates the angle of torque on dial graduated is degree. The dial reading multiplied by spring factor gives the troque. A container is also supplied. Complete with a set of springs,one each of approx. 2 kg. cm., 4kg.cm., 6 kg cm and 8 kg.cm.

View Complete Details

Yes, I am interested!

Direct Shear Apparatus
Interested in this product?
Get Best Quote

Direct Shear Apparatus

Get Latest Price

CompanyEast India Company

The apparatus comprises of the following Loading Unit Vertical load, capacity 8 kg/sq. cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load for the applied either through a steel ball recessed in the loading pad or directly through a base of the loading yoke. shear load capacity 400 kg. Direct shear box for square specimen size 60X60X25 mm complete with one base plate, two plane gripper plates, porous stones and one loading pad. shear box housing,complete with two ball roller strips. Specimen cutter for 60X60X25 mm specimen.

View Complete Details

Yes, I am interested!

Vicat Apparatus
Interested in this product?
Get Best Quote

Vicat Apparatus

Get Latest Price

CompanyEast India Company

The procedure, as recommended in various standards, is for determining the quantity of water required to produce a cement paste of standard consistency. The standard consistency is attained when the 10 mm plunger of the apparatus penetrates the material to a pre-determined depth under free-fall. A new sample is prepared and tested with initial and final needles in accordance with the procedure described in various specifications. Vicat Apparatus consists of a frame bearing a movable rod with a cap at top and a vicat mould in the form of the frustum of a cone, (80+5)/70 + 5mm dia at the base,(70mm+5mm) /60 mm at the top and 40 mm high, and with a glass base plate of minimum 2.5 mm thickness with various models of Vicat apparatus.

View Complete Details

Yes, I am interested!

Proctor Compaction Apparatus
Interested in this product?
Get Best Quote
CompanyEast India Company

IS-2720 (Part VII) It consist of a compaction Mould 100 mm DIA. X 127.3 mm height X 1000 cc volume complete with collar and base plate all steel construction. Rammer 2.6 kg X 310 mm controlled fall through a guide tube. Rammer 4.89 kg X 450 mm controlled fall for heavy compaction test as per IS-2720 Part VIII.

View Complete Details

Yes, I am interested!
4.2/5★★★★★★★★★★

Reviewed by 20 Users

5 star70%

4 star5%

3 star0%

2 star5%

1 star20%

User Satisfaction

Response80%

Quality100%

Delivery100%

Most Relevant Reviews

M

Mubarak | Mumbai, Maharashtra

★★★★★ ★★★★★

25-April-21| Product Name : Ammonia Paper Roll

Response

Quality

Delivery

P

Padi Krishna Rao | Srikakulam, Andhra Pradesh

★★★★★ ★★★★★

21-April-21

it''s a 4/4size

All Rights Reserved (Terms of Use)