Eip Enviro Level Controls Private Limited

The hardware element of Artimis ® ³⁰⁰ solution consists of out of the Artimis® ^{300 300} scanner ,a control/communication box and a dedicated PC on site running proprietary ART and AIMS software.The Artimis scanner takes an average of 10500 point measrurements on a surface per individual scanning cycle and offers exceptional accuracies when utilised to quantify hard and bulk commodities. It can function with a single scanner or multiple scanners in network, as required by the surface area of the commodity.

Scans can be scheduled, cycled or performed on demand. To enhance accuracy, it is customised to easch client and application by factoring in the amount of points sourced per square meter, desnity of the points and the scan patterns of each installation.The proprietary and ART and AIMS software element calculates volumes, publishes reports and provides a graphic interface.The PC running this software is usually loacted on the clients network for easy distribution of data to all relevant personnel. Scan results are immediately avaailable on completion of scan cycle and no additional calibrations or calculations are neccesary post scan as all ‘spikes’ or irregular points were eliminated automatically by the software.

the form of Nuclear Density Measurement using Na-22 as the Gamma source. This instrument provides a direct value to customer/end-user as this does not require regular audit report to be provided to AERB by end user and also no training is required for installation and troubleshooting of the instrument. In addition, the procurement and usage of the instrument is based on the type approvals received by EIP for the use of device in India, without any other formalities required at the End-User/ EPC end.

The offered technology is the use in the devices of natural or artificial gamma radiation sources emitting 1 -20  micro Curie which does not exceed the minimum significant activity level pursuant to the existing  IAEA radiation safety standards and regulations therefore our devices are not subject to the supervision by the State Nuclear Supervision Authority, Sanitary Epidemiological Service.

Also called Pressure switch and operates by sensing material pressing against the diaphragm.

Primary application in Bucket Elevator in Cement Plants to prevent jamming of cycle due to spillage and collection at the bottom. Available up to 400 degrees C.

Dust Mointoring and Filters Leak Detection The Particular Monitor and Transmitter employ a field-proven combination of passive-induction and protective-prode technologies. As particulates flow near and around the probe, minute currents are dynamically induced into the probe by flowing particulates.The DSP processes the singal into an absolute output that is reasonably linear to mass . A protective layer over the probe ensures reliable operation with all type of particulate including moist powders and highly conductive dust.