X

Elmech Engineers

Faridabad, Haryana

| GST  06AFBPJ6050K2ZJ

| TrustSEAL Verified

|

View Mobile Number87% Response Rate

Our Products

+View All

Flow Meter

Pioneers in the industry, we offer Thermal Mass Flow Meter For Compressed Air/ Gases, Ultrasonic Flow Meter For Residential Apartments, Commercial Buildings, Portable Ultrasonic Flow Meter, Flow Rate Transmitter, Pneumatic Variable Area Flow Meter and WTA SERIES HYDRAULIC ANALYZER from India.

  • Thermal Mass Flow Meter For Compressed Air/ Gases
  • Thermal Mass Flow Meter For Compressed Air/ Gases
Thermal Mass Flow Meter For Compressed Air/ Gases
Interested in this product?
Get Best Quote
BrandSUTO-iTEC
DisplayDigital
Application MediaCompressed air/gases
Flow Range0.5 - 47880m3/hr
MaterialMetal Parts: SUS316L/ Casing: PC + ABS/ Sensor: Ceramic with glass coating
Usage/ApplicationCompressed air
Power Supply15...30VDC/ 200mA
ColorWhite
Model Name/NumberS401/ S421
Accuracy1.5 % of reading + 0.3 % full scale (Optional 1 % of reading)
Electronics EnclosureIP65

S401 / S421 FEATURES AT A GLANCE

  • Measures standard flow, mass flow and consumption
  • Thermal mass flow, independent of pressure and temperature changes
  • IP65 casing provides robust protection in rough industrial environment
  • Very fast response time
  • High accuracy and wide measuring range
  • Isolated mA and pulse output signals or Modbus/RTU or Modbus/TCP interface
  • Selectable gas type (Some gases require real gas calibration!)
  • Sensor can be calibrated in 2 different gases

S401 BENEFITS ( INSERTION TYPE FLOW METER)

  • Tube diameters of DN25 to DN500.
  • 2 installation types: center installation and 100 mm insertion depth installation for bigger pipes (> DN250)
  • Installation under pressure through 1/2” ball valve

S421 BENEFITS ( INLINE TYPE FLOW METER)
  • Pipes sizes available: DN15, DN20, DN32, DN40, DN50, DN65, DN80
  • Fits your needs: various process connections available  (R-thread, EN 1092-1 flange or ANSI flange)
  • Exchangeable sensor unit (easy sensor swap)
  • Optional flow conditioner, no need for a straight inlet anymore

View Complete Details

Yes, I am interested!

Ultrasonic Flow Meter For Residential Apartments, Commercial Buildings
Interested in this product?
Get Best Quote
Flow Media TypeWater

The Ultrasonic flowmeter is designed to measure the average volumetric flow rate and volume of cold and hot water. Scope of application: housing and communal services and individual housing construction, house, and apartment accounting.

Distinctive features:
  • has a built-in lithium battery, which ensures uninterrupted operation of the flow meter for the period of the calibration interval (4 years);
  • does not require on-site configuration;
  • insignificant pressure losses in the measuring section in comparison with tachometric flow meters;
  • does not require filter installation;
  • degree of protection IP54;
  • threaded pipe connection G ¾ - B, G1 - B, G1 ¼ - B.
Information output:
  • graphic liquid crystal indicator;
  • in the form of impulses with normalized weight ;
  • via the Wireless M-Bus interface;
  • via the RS-485 interface.
Specifications
Characteristic Value
Nominal diameter, DN DN15 DN20 DN25
Minimum measurable average volumetric flow rate of liquid, Q 1 , m 3 / h 0.016 0.025 0.04
Transient measured average volumetric flow rate of liquid, Q 2 , m 3 / h 0.025 0.04 0.064
Nominal measured average volumetric flow rate of liquid, Q 3 , m 3 / h 1.6 2.5 4.0
Relative error of flow measurement,% Complies with OIML R49 class 2
Sensitivity threshold, m 3 / h 0.008 0.012 0.02
Pressure in the pipeline, MPa, no more 1.6
Liquid temperature range, ° ?? from 0 to 90
Flow meter supply voltage 3.6V from built-in lithium battery
The number of measurement records:
- hourly
- daily
- monthly

1440
460
72
Mean time between failures, h 45,000
Average service life, years 10
Warranty period of operation, months 25

View Complete Details

Yes, I am interested!

Portable Ultrasonic Flow Meter
Interested in this product?
Get Best Quote
Flow Media TypeWater

Advantages:
  • digital data processing, short measuring time, high interference protection;
  • automatic adjustment;
  • reversible stream measurement in pipeline;
  • low frequency transformer for corrosion pipelines and liquids with high quantity of hard particles;
  • mode for mass and heat calculation using volume, temperature and pressure value;
  • ultrasonic thickness indicator set and magnet line for fast installation of low frequency transformer on pipelines of any diameter;
  • sensor LCD, definition of 640*480;
  • SD-card zipping;
  • USB-interface;
  • impact-resistant case of IP 67;
  • explosion safe version.
Specification:
ParameterValue
Pipe size, DN, mm 20 ÷ 5 000
Flow velocity range, m/s 0.1 ÷ 20
Accuracy, % from 1.5
Fluid temperature range, °?? minus 30 ÷ 150
Ambient temperature for transmitter, °?? minus 10 ÷ 50
Transmitter / transducers protection IP67
Number of stored sets of site parameters 200
Measurement and error data logging capacity, number of records 100 000
Storage rate, s 1 ÷ 300
Power supply:
- buttery, V
- external power supply, VDC
- via ~220VAC/=12VDC charger

3.6 10÷30
220VAC 50Hz
Battery uninterrupted operation, hrs. up to 24
Transmitter weight, kg under 3
Transmitter dimensions, mm 285 × 250 × 125
Outputs:
  • LCD;
  • pulse output;
  • RS-232 interface;
  • USB.

View Complete Details

Yes, I am interested!

Flow Rate Transmitter
Interested in this product?
Get Best Quote

Flow Rate Transmitter

Get Latest Price

MaterialStainless Steel
Application MediaAir, Gas, Water, Oil
BrandAW Lake (USA)

The Flow Rate Transmitter is ideal for batching, industrial process control, mobile hydraulic equipment and computer / PLC controlled hydraulic system monitoring applications. It is designed without delicate internal components to break, abrade, or corrode. The weather tight construction includes a rugged cast aluminum enclosure built to NEMA 4X standard for installation outdoors. This variable area flow meter is used to measure air, gas, oil, and water. The transmitter provides a visual indication of flow rate that matches the transmitted output for direct reading.
Technical Specifications:
MEASURING ACCURACY:

Liquids
±2.0% of full scale for oil and water

Air/Gas
±2.5% of full scale in center third of measuring range;
±4% in upper & lower thirds for air and gas

REPEATABILITY:

±1% of full scale

FLOW MEASURING RANGE:

0.1-150 GPM (0.5-550 LPM)

2-1300 SCFM (1-600 SLPS)

MAXIMUM OPERATING PRESSURE:

Liquids
Aluminum & Brass: 3500 PSIG (240 Bar)
Stainless Steel: 6000 PSIG (410 Bar)

Air/Gas
Aluminum and brass: 600 PSIG (40 Bar)
Stainless steel: 1000 PSIG (69 Bar)

MAXIMUM OPERATING TEMPERATURE:

Media: 185°F (85°C)
Ambient: 185°F (85°C)

STANDARD CALIBRATION FLUIDS:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
Water meters: tap water @ 70°F (21°C), 1.0 sg
Air meters: air @ 70°F (21°C), 1.0 sg and 100 PSIG (6.8 Bar)

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

VISCOSITY

Standard viscosities up to 110 cSt. For viscosities between 110 to 430 cSt contact factory.

MATERIALS OF CONSTRUCTION (NON-WETTED COMPONENTS):

Enclosure & Cover:  Painted Aluminum

Seals: Buna-N®

Window: Pyrex®

Din Connector: Polyamide

MATERIALS OF CONSTRUCTION (WETTED COMPONENTS):

Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel

Seals:

Anodized Aluminum: Buna-N® (STD), EPR, FKM, or Kalrez®

Brass: Buna-N® (STD), EPR, FKM, or Kalrez®

Stainless Steel 303: FKM with PTFE backup (STD), Buna-N®, EPR or Kalrez®

Transfer Magnet: PTFE coated Alnico

All other internal parts: Stainless steel

View Complete Details

Yes, I am interested!

Pneumatic Variable Area Flow Meter
Interested in this product?
Get Best Quote
Application MediaCompressed air
BrandAW Lake (USA)

Pneumatic Flow Meters are ideal for monitoring air compressor efficiencies, pneumatic tool air consumption and industrial gas flows.

Pneumatic Flow Meters are ideal for monitoring air compressor outputs, pneumatic tool air consumption, and industrial gas flows. The rugged and reliable design includes all metal pressure vessels, allowing safe installation in industrial systems and industries. Enjoy the unrestricted mounting capabilities and easy installation with multiple ports available.

Technical Specifications:

MEASURING ACCURACY:

±2.5% of full scale in the center third of the measuring range; ±4% in upper and lower thirds

REPEATABILITY:

±1% of full scale

FLOW MEASURING RANGE:

2-1300 SCFM @ 100 PSIG (1-600 LPS)

MAXIMUM OPERATING PRESSURE:

Aluminum & Brass: 600 PSIG (40 Bar)
Stainless Steel: 1000 PSIG (69 Bar)

MAXIMUM OPERATING TEMPERATURE:

240°F (116°C) Note: For operation to 600°F (316°C), see our High Temp datasheet.

STANDARD CALIBRATION FLUIDS:

Air @ 70°F (21°C), 1.0 sg and 100 PSIG (6.8 Bar)

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION (NON-WETTED COMPONENTS):

Window Tube:  Polycarbonate
Window Seals: 
Buna-N®

MATERIALS OF CONSTRUCTION (WETTED COMPONENTS):

Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel
Seals:

  • Aluminum: Buna-N® (STD),EPR, FKM, or FFKM
  • Brass: Buna-N® (STD),EPR, FKM, or FFKM
  • Stainless Steel: FKM with PTFE backup (STD), Buna-N®, EPR or FFKM

Transfer Magnet: PTFE coated Alnico
All other internal parts: Stainless steel

View Complete Details

Yes, I am interested!

WTA SERIES HYDRAULIC ANALYZER
Interested in this product?
Get Best Quote
BrandAW Lake (USA)
Usage/ApplicationIndustrial Use

WTA Series Hydraulic Analyzer is a simple compact design allows for simultaneous measurement of flow, pressure and temperature on Mobile Industrial & Agricultural industries.

The WTA Series Hydraulic Analyzer is a simple compact design allows for simultaneous measurement of flow, pressure and temperature on Mobile Industrial & Agricultural equipment. Its painted high quality steel case enables the WTA Hydraulic Analyzer to withstand the most rigorous of use in the field. The WTA can be connected aw “Inline” between the pump and valve for convenient machine testing in all environments

View Complete Details

Yes, I am interested!

BI-DIRECTIONAL VARIABLE AREA FLOW METER
Interested in this product?
Get Best Quote
Accuracy+-2.0% of full scale
MaterialStainless Steel
BrandAW Lake (USA)
Application MediaAny Liquid
Flow Range2-375 LPM

The Bi-Directional Variable Area Flow Meter is a high performing oil and water meter available in aluminum, brass, or stainless steel to meet system requirements. It measures bi-directional flow of oils and water, such as in test kits and mobile hydraulic systems. The high pressure operation, multiple ports available, and unrestricted mounting make this flow meter versatile, customizable, and easy to install. The all metal pressure vessels provide a safe and reliable, performance.

Technical Specifications:

MEASURING ACCURACY:

±2.0% of full scale

REPEATABILITY:

±1% of full scale

FLOW MEASURING RANGE:

0.5-100 GPM (2-375 LPM)

MAXIMUM OPERATING PRESSURE:

Aluminum and brass meters: 3500 PSIG (240 Bar), Stainless steel meters: 6000 PSIG (410 Bar)

MAXIMUM OPERATING TEMPERATURE:

240°F (116°C) Note: for operation to 600°F (316°C), see our High Temperature Data sheet.

STANDARD CALIBRATION FLUIDS:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
Water meters: tap water @ 70°F (21°C), 1.0 sg

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION:

Window Tube: Polycarbonate

Window Seals: Buna-N, PTFE option

Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel

Seals: Buna-N, optional EPR, FKM, or FFKM

Transfer Magnet: PTFE coated Alnico

All other internal parts: Stainless steel

View Complete Details

Yes, I am interested!

CASE DRAIN FLOW METER
Interested in this product?
Get Best Quote

CASE DRAIN FLOW METER

Get Latest Price

Application MediaAny Liquid
Flow Range0.5-115LPM
Accuracy+-5.0% of full scale
MaterialStainless Steel
BrandAW Lake (USA)

The Case Drain Flow Meter is a Variable Area Flow Meter offering a low cost alternative for monitoring pump performance and identifying required maintenance without interrupting operation. This meter is available for oil or water flow measurement. The superior exterior design of this flow measurement solution is weather-tight for use in outdoor environments and in systems with wash-down requirements.

Technical Specifications:

MEASURING ACCURACY

±5.0% of full scale

REPEATABILITY

±1% of full scale

FLOW MEASURING RANGE

0.1-30 GPM (0.5-115 LPM)

MAXIMUM OPERATING PRESSURE

1000 PSIG (69 Bar)

MAXIMUM OPERATING TEMPERATURE

240°F (116°C)

STANDARD CALIBRATION FLUIDS:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg

Water meters: tap water @ 70°F (21°C), 1.0 sg

FILTRATION REQUIREMENTS

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION (NON-WETTED COMPONENTS):

Window Tube: Polycarbonate

Window Seals: Buna-N

MATERIALS OF CONSTRUCTION (NON-WETTED COMPONENTS):

Casing: Anodized Aluminum

End Ports: Non-Anodized Aluminum

Seals: Buna-N

Transfer Magnet: PTFE coated Alnico

All other internal parts: Stainless steel

View Complete Details

Yes, I am interested!

CLEARVIEW VALUE FLOW METER
Interested in this product?
Get Best Quote
Flow Range5-110 LPM
Accuracy+-2.0% of full scale
MaterialStainless Steel
BrandAW Lake (USA)
Application MediaWater

The ClearView Value Flow Meter is used for water and hydraulic oil flow measurement. This flow meter is an economical way to monitor municipal pressure water flows, observe case drain flows, and verify pump outputs. The transparent body on this variable area flow meter allows for visual inspection of fluid conditions to diagnose any problems at a glance.

Technical Specifications:

MEASURING ACCURACY:

±2.0% of full scale

REPEATABILITY:

±1% of full scale

FLOW MEASURING RANGE:

1-30 GPM (5-110 LPM)

MAXIMUM OPERATING PRESSURE:

325 PSIG (22.4 Bar)

MAXIMUM OPERATING TEMPERATURE:

ClearView H2O:  200°F (93°C) (for water)

ClearView+:  250°F (121°C)

STANDARD CALIBRATION FLUIDS:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg

Water meters: tap water @ 70°F (21°C), 1.0 sg

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION:

End Ports: Brass, Ryton®

Seals: Viton

Spring: Stainless Steel

Body: ClearView H2O – Polycarbonate, Clearview+ – Polysulfone  

Indicator: Polysulfone  

View Complete Details

Yes, I am interested!

BASIC VARIABLE AREA FLOW METER
Interested in this product?
Get Best Quote
BrandAW Lake (USA)

 Basic Inline Variable Area flow meter is ideal for monitoring pump performance and oil or water flows through hydraulic circuits and cooling systems. Often referred to as “rotameters,” 
Basic meters are a low cost alternative to other flow meter types and are available in numerous materials of construction, including aluminum, brass and stainless steel to meet system and media requirements. The superior design not only makes this flow meter weather-proof for outdoor environments and wash-downs, but also reliable offering maintenance-free performance.

Technical Specifications:

MEASURING ACCURACY:

±2.0% of full scale

REPEATABILITY:

±1% of full scale

FLOW MEASURING RANGE:

0.1-150 GPM (0.5-550 LPM)

MAXIMUM OPERATING PRESSURE:

Aluminum and brass meters: 3500 PSIG (240 Bar), Stainless steel meters: 6000 PSIG (410 Bar)

MAXIMUM OPERATING TEMPERATURE:

240°F (116°C) Note: for operation to 600°F (316°C), see our High Temperature Data sheet.

STANDARD CALIBRATION FLUIDS:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
Water meters: tap water @ 70°F (21°C), 1.0 sg

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION:

Window Tube: Polycarbonate

Window Seals: Buna-N, PTFE option 

Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel

Seals: Buna-N, optional EPR, FKM, or FFKM

Transfer Magnet: PTFE coated Alnico

All other internal parts: Stainless steel

View Complete Details

Yes, I am interested!

PHOSPHATE ESTER FLOW METER
Interested in this product?
Get Best Quote
BrandAW Lake (USA)

Phosphate Ester Flow Meter is compatible with aviation lubricants such as Skydrol®, and fire-retardant fluids such as Pydraul®, Fyrquil® and Houghton 900 series. Meters are density corrected to 1.145 sg.
The Phosphate Ester Flow Meter is a Variable Area Flow Meter offering a low cost alternative for measuring heavier, solvent-based materials and lubricants. The superior weather-tight construction of this flow meter allows for use in outdoor environments and where wash-downs are required. By using a Pyrex® tube and special seals, this meter is compatible with more aggressive fluids. The standard selection of NPT, SAE, and BSPP ports reduce the number of adapters needed for an easy installation.


View Complete Details

Yes, I am interested!
All Rights Reserved (Terms of Use)