Elite Enterprise

Features:-

·       Microcontroller based design.

·       Wide range of input voltage.

·       Ad-hoc design support.

·       Separate output for Solenoid , Pump and

Indicator LED.

·       Solid state switch are used so no noise and

no heat generation at all.

·       On board potentiometer for changing

Dispensing time and sensor’s sensitivity.

·       All types of Pumps can be used.

·       Plug and play design, offers benefits like low

labour cost, and be used in DIY projects.

Specification:-

·       Input Voltage: 12-24V

·       Output Voltage: 12-24V

·       Sensor can be Used: Ultrasonic

·       Microcontroller: 8bit Microcontroller

·       Driven Load: 10Amp

·       Switching: MOSFET based Silent and Fast

Switching

·       Indicator LED Output: 5-12V

·       Detection Range Of Sensor: (1-10) Inch

·       Dispensing Time: (1-8) Sec

·       Dimension of Board : Length- 7cm, Width- 7.5cm

·       Operation Description

·       As somebody place their hands in front of sensor it starts dispensing sanitiser till time (you had been set) and will never dispense again until someone take off their hands and place it again. Dispensing status LED will glow while the dispensing continues. Dispensing time can vary from 1 to 8 seconds using provided potentiometer.

Features:-

·       Microcontroller based design.

·       Buzzer for dispensing indication.

·       High electrical noise immunity .

·       Wide range of input voltage.

·       Ad-hoc design support.

·       Separate output for two Pump and Indicator LED,

Strip.

·       Solid state switch are used so no noise and no heat

generation at all.

·       On board potentiometer for changing sanitising

time and sensor's sensitivity.

·       All types of Pumps can be used.

·       Plug and play design, offers benefits like low labour

cost, and be used in DIY projects.

Specification:-

·       Input Voltage: 12-24V

·       Output Voltage: 12-24V

·       Sensor can be Used: Ultrasonic

·       Microcontroller: 8bit Microcontroller

·       Driven Load: 10Amp

·       Buzzer: 5V

·       Switching: MOSFET based Silent and Fast

Switching

·       Indicator LED Output: 5V

·       Indicator LED Strip Output: 12V

·       Detection Range Of Sensor: (1-12) feet

·       Sanitizing Time: (5-30) Sec

·       Dimension of Board : Length- 9cm, Width-

5.5cm

Operation Description

Additional Information:

• Delivery Time: 1-2

Features:-

·       Microcontroller based design.

·       Wide range of input voltage.

·       Ad-hoc design support.

·       Separate output for Solenoid , Pump and

Indicator LED.

·       Solid state switch are used so no noise and

no heat generation at all.

·       On board potentiometer for changing

Dispensing time and sensors sensitivity.

·       All types of Pumps can be used.

·       Plug and play design, offers benefits like low

labour cost, and be used in DIY projects.

Specification:-

·       Input Voltage: 12-24V

·       Output Voltage: 12-24V

·       Sensor can be Used: Ultrasonic

·       Microcontroller: 8bit Microcontroller

·       Driven Load: 10Amp

·       Switching: MOSFET based Silent and Fast

Switching

·       Indicator LED Output: 5-12V

·       Detection Range Of Sensor: (1-10) Inch

·       Dispensing Time: (1-8) Sec

·       Dimension of Board : Length- 7cm, Width- 7.5cm

·       Operation Description

·       As somebody place their hands in front of sensor it starts dispensing sanitiser till time (you had been set) and will never dispense again until someone take off their hands and place it again. Dispensing status LED will glow while the dispensing continues. Dispensing time can vary from 1 to 8 seconds using provided potentiometer.

Features:-

·       Microcontroller based design.

·       High electrical noise immunity.

·       Ad-hoc  design support.

·       Separate output for Pump and Indicator

LED.  

·       Solid state switch are used so no noise

and no heat generation at all.

·       On board potentiometer for changing

Dispensing time

·       All types of Pumps can be used.

·       Plug and play design, offers benefits like

low labour cost, and be used in DIY projects.

Specification:-

·       Input Voltage: 3-5V

·       Output Voltage: 3-5V

·       Sensor can be Used: Ultrasonic

·       Microcontroller: 8bit Microcontroller

·       Driven Max Load: 2Amp

·       Switching: Transistor based Silent and Fast

Switching

·       Indicator LED Output: 5V

·       Detection Range Of Sensor: 4.5 Inch(can

be changed)

·       Dispensing Time: (1-5) Sec

·       Dimension of Board : Length- 5.5cm,

Width- 3.5cm

Operation Description

As somebody place their hands in front of sensor it starts dispensing sanitiser till time (you

had been set) and will never dispense again until someone take off their hands and place it again. Dispensing status LED will glow while the dispensing continues. Dispensing time can vary from 1 to 5 seconds using provided potentiometer.

Additional Information:

• Delivery Time: 1-2

Specification:-

• Input Voltage: 24V

• Output Voltage: 24V

• Sensor can be Used: Ultrasonic

• Microprocessor : ESP8266

• Driven Max Load: 30Amp

• Switching: Relay Based

• Indicator LED Output: (5-12)V

• Detection Range Of Sensor: 5 Inch(can be

  changed by using wifi)

• Dispensing Time: (0-10) Sec can be set

  Using Wifi

• Dimension of Board : Length- 9cm, Width-

  7.5cm

Features:-

• MicroprocessorESP8266baseddesign.

• Highelectricalnoiseimmunity.

• Ad-hocdesignsupport.

• SeparateoutputforPump,Solenoidand

  Indicator LED.

• Wifi enable Board, Firmware can update

  via Wifi.

• Pump Bming can be set by using wifi.

• Inbuilt Buzzer for dispenser IndicaBon.

• All types of Pumps can be used.

• Plug and play design, offers benefits like

  low labor cost, and be used in DIY projects.

Operation Description

What ever sanitiser dispensing functionality you want, can be update in board by using Mobile. Pump Timing and functionality of dispenser will be update by using wifi.

Additional Information:

• Delivery Time: 1-2

• Microcontroller based design., Buzzer for dispensing indication., Separate output for Solenoid , Pump and Indicator LED, Strip., Solid state switch are used so no noise and no heat generation at all., On board potentiometer for changing Dispensing 8me and sensors sensitivity., All types of Pumps can be used., Plug and play design, offers benefits like low labor cost, and be used in DIY projects., High electrical noise immunity & Wide range of input voltage.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 2-3 days