Our Products
- Dow Corning DC 3145
- Dow Corning DC 737
- Dow Corning DC 3140 RTV Coating
- Henkel Loctite Catalyst 24 LV 1LB
- Dow Corning SE 9186
- Dow Corning SE 9152
- Dow Corning DC 732 Sealants
- Dow Corning DC 744
- Dow Corning DC 739
- Glue Dots DSP21-201
- ResinLab UR7001 Polyurethane Adhesive Clear
- Dow Corning DC 7091 Adhesive
- Loctite Hysol 7804
Adhesive
Model Number | Dow RTV 3145 |
Application Industry | Jointing, Sealing |
Color | Clear |
Country of Origin | Made in India |
Brand | Dow |
Packaging Size | 90 ml |
Packaging Type | Tube |
Dow 3145 RTV MIL-A-46146 Adhesive Sealant - Clear
Features:
- Non-flowing
- Room temperature cure
- High tensile/tear strength and elongation
- MIL-A-46146 Group II
Applications:
Suitable for:
- Sealing openings in modules and housings
- Assembly of components on printed wiring board(PWB)
- Sealing in and around wired and electrical leads
Additional Information:
- Item Code: DC-3145
View Complete Details
Country of Origin | Made in India |
Deal In | New |
Brand | Ellsworth Adhesives |
Model | Ellsworth Adhesives |
Location | India |
Dow Corning® 737 Neutral Cure Sealant
Features:
- Primerless adhesion to many
- materials
- Oxime cure; cures at room temperature upon exposure to moisture in the air
- Adhesion to many plastics, metals, painted surfaces, glass and rubbers
- Does not react with or corrode most metals or plastics (see Limitations)
- Fast cure – 3 to 6 minutes skin-over time; 14 minute tack-free time
- Cures to a handling condition in 24 hours on exposure to moisture in the air
- Will not slump, sag or run off surfaces
- Broad temperature range performance; cured material stays flexible from -85 to 350°F (-65 to 177°C)
- 100 percent silicone rubber
Additional Information:
- Item Code: DC-737
View Complete Details
Surface Of Application | Electronics |
Color | Clear |
Country of Origin | Made in India |
Packaging Size | 90 ml |
Packaging Type | Tube |
Brand | Dow |
Application Industry | Jointing, Sealing |
Dow 3140 RTV Coating
One-part, translucent adhesive or coating with good flowability, good flame resistance, UL, IPC and Mil Spec tested.
Features:
- Good flowability
- Room temperature cure
- No added solvents
- UL 94 V-1, IPC-CC-830 and MIL-A-46146 tested
Applications:
Suitable for:
- Protection of corrosion-sensitive components.
- Protection of rigid and flexible circuit boards
- Improved pin/solder joint coverage
- Thin-section encapsulation.
- Pin sealing
Additional Information:
- Item Code: DC-3140
View Complete Details
Surface Of Application | Electronic Components |
Curing Time | 8 to 16h @ room temperature; 2h @ 65 DegreeC |
Application Industry | Electronics |
Color | Clear |
Operating Temperature | -65 to 105 DegreeC |
Brand | Henkel |
Grade Standard | Industrial |
Packaging Type | Bottle |
Form | liquid |
Part number: 24LV 1LB CLEAR
Henkel Loctite Catalyst 24LV Clear, formerly Emerson and Cuming, is a room temperature curing, epoxy hardener that offers low viscosity and has excellent thermal shock and impact resistance. 1 lb Bottle.
Typical Use: | Used as a hardening agent for epoxy resins; it is recommended for small mass castings. |
View Complete Details
Brand | Ellsworth Adhesives |
Model Number | Ellsworth Adhesives |
Packaging Size | 20 Kg |
Packaging Type | Bucket |
Application Industry | Caulking |
Surface Of Application | Ceramic |
Country of Origin | Made in India |
Dow Corning® SE 9186 Clear or White Adhesive
Features:
- Fast tack free RT cure
- Flowable
- Controlled silicone volatility
- No added solvents
Applications:
- Sealing of electronic equipment and modules
- Parts fixing on circuit board
Additional Information:
- Item Code: SE-9186
View Complete Details
Brand | Ellsworth Adhesives |
Model Number | Ellsworth Adhesives |
Packaging Size | 20 Kg |
Packaging Type | Bucket |
Application Industry | Caulking |
Surface Of Application | Ceramic |
Country of Origin | Made in India |
Dow Corning® SE 9152 HT Adhesive
Features:
- Fast tack free RT cure
- Low viscosity
- No added solvents
- Added heat resistance for sustained 275C exposure
Applications:
- Sealing of sheathed heater terminations
- Staking, fixing and sealing of high temperature components
Additional Information:
- Item Code: SE-9152HT
View Complete Details
Country of Origin | Made in India |
Deal In | New |
Location | India |
Brand | Ellsworth Adhesives |
Model | Ellsworth Adhesives |
DOW CORNING 732 Multi-Purpose Sealant
Features:
- One-component adhesive/sealant
- Cures at room temperature when exposed to moisture in the air
- Acetoxy cure system
- Non-sag, paste consistency
- Easy to apply
- Cures to a tough, flexible rubber
- Good adhesion to many substrates
- Stable and flexible from -60°C (-76°F) to +180°C (356°F), with short peaks up to +205°C (401°F)
- Black version: stable and flexible from -60°C (-76°F) to +205°C (401°F), with short peaks up to +230°C (446°F)
- Excellent dielectric properties
- Complies with MIL-A46106
- Complies with FDA 177.2600
- Available in white. black or clear
Applications:
- General industrial sealing and bonding applications
- Complies with MIL-A-46106 and FDA 177.2600
Additional Information:
- Item Code: DC-732
View Complete Details
Brand | Ellsworth Adhesives |
Model Number | Ellsworth Adhesives |
Packaging Size | 20 Kg |
Packaging Type | Bucket |
Application Industry | Caulking |
Surface Of Application | Ceramic |
Country of Origin | Made in India |
Dow Corning® 744 RTV Sealant
Features:
- Non-flowing
- Room temp cure
- High elongation for added stress relief
Additional Information:
- Item Code: DC-744
View Complete Details
Country of Origin | Made in India |
Model | Ellsworth Adhesives |
Location | India |
Deal In | New |
Brand | Ellsworth Adhesives |
Dow Corning
Special features:
- Ease of application; ready-to-use as supplied
- Good un primed adhesion to plastics
- Non-acetic acid odor
- Noncorrosive; does not react with or corrode most metals
- Good weather ability
USES:
Uses for Dow Corning 739 Plastic Adhesive include general OEM and assembly applications. Examples of specific uses include:
- Adhering sole plates to housings on industrial steam cleaning machines
- Sealing substrates in the fabrication of duct units
- Adhering windshields and splash boards to boat bodies
- Sealing and adhering plastic housings on sump pumps
- Applying weatherproofing seals to the unit bodies of refrigerated trucks
Additional Information:
- Item Code: DC-739
View Complete Details
Glue Dots DSP21-201
Get Latest Price
Surface of Application | Plastic, Paper, Lightweight objects |
Features | Pressure sensitive |
Brand | Glue Dots |
Color | Clear |
Glue Dots, a wholly owned subsidiary of Ellsworth Adhesives develops and manufacturers innovative adhesive solutions; offering a clean, versatile, and preferred alternative to tapes and liquid and hot glues.
DSP21-201 is a pressure sensitive, medium tack adhesive to be used on lightweight objects where easy release properties are required.
Characteristics:-
Clear in color
Removable
Low-medium peel strength
Medium shear strength
- Ready for use as supplied
Provides stronger hold, while maintaining easy release properties:
Glue Dots brand products are produced using a variety of synthetic rubber-based adhesives. These adhesives are non-aqueous. There are no liquid components to flash off over time.
Suggested Use: Paper, Plastic, Lightweight objects.
View Complete Details
ResinLab UR7001 Polyurethane Adhesive Clear
Get Latest Price
Usage | Provides excellent adhesion to a wide variety of substrates |
ResinLab UR7001 Polyurethane Adhesive Clear is a two component adhesive with excellent adhesion to a wide variety of substrates such as PVC, ABS, polycarbonate, acrylic, 304 stainless steel and aluminum. 1:1 mix ratio by volume, Cartridge.
ResinLab, an Ellsworth Adhesives company, specializes in custom formulations of adhesives, encapsulants, epoxies, surface preparation and thermally conductive materials. Ellsworth Adhesives proudly offers a full line of Cynergy® brand cyanoacrylate adhesives and surface preparation products. Markets include consumer products, general industry, lighting, power, and transportation.
View Complete Details
Brand | Ellsworth Adhesives |
Model Number | Ellsworth Adhesives |
Packaging Size | 20 Kg |
Packaging Type | Bucket |
Application Industry | Caulking |
Surface Of Application | Ceramic |
Country of Origin | Made in India |
Dow Corning® 7091 Adhesive/Sealant
Features:
- One-component adhesive/sealant
- Cures at room temperature when exposed to moisture in the air
- Alkoxy cure system
- Non-sag, paste consistency
- Easy to apply
- Cures to a tough, flexible rubber
- Excellent adhesion to many substrates
- Stable and flexible from -40°C (-40°F) to +180°C (+356°F)
Applications:
- Designed for applications which demand a strong but flexible bond, such as when bonding materials with differing thermal expansion rates, e.g. glass to metal or glass to plastic.
- Un primed adhesion to commonly used materials including enamelled and painted steel, aluminum, ceramic and glass as well as to certain plastics used in engineering applications.
- Used as a Formed-in-Place Gasket (FIPG) material.
Additional Information:
- Item Code: DC-7091
View Complete Details
Loctite Hysol 7804
Get Latest Price
Features | Room Temperature Cure |
Type | Polyamide |
Material Compatibility | Metal , Wood |
Brand | Loctite |
Color | Amber |
Loctite Hysol 7804 polyamide hot melt is a tough, elastomeric, high performance adhesive with excellent impact resistance at low temperatures. It bonds to many difficult substrates including: metals, plastics, wood, leather, fabric, non-woven fabric, and foils.
Typical Usage :-
It is recommended for demanding applications where substrates may be exposed to temperature extremes.
Applications :-
Aluminum, Stainless Steel, Polycarbonate, Nylon, Glass, ABS, PVC, G-10 Epoxy, LDPE.
Application Method :-
Hysol Hot Melt Applicator
View Complete Details
- Developed and Managed by IndiaMART InterMESH Limited