X
View Mobile Number 87% Response Rate
Send Email

Our Products

34 products available
+View All

HEAT AND MASS TRANSFER LAB

Pioneers in the industry, we offer Thermal Conductivity By Guarded Hot Plate - Heat And Mass Transfer Lab Equipment, Thermal Conductivity Of Insulating Powder -heat And Mass Transfer Lab Equipment, Thermal Conductivity Of Metal Rod - Heat And Mass Transfer Lab Equipment, Composite Wall Set Up - Heat And Mass Transfer Lab Equipment, Absorption Column - Heat And Mass Transfer Lab Equipment and Film Wise And Drop Wise Condensation - Heat And Mass Transfer Lab Equipment from India.

Thermal Conductivity By Guarded Hot Plate - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
Usage/ApplicationLaboratory
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

 

The unit consists of a guarded hot plate assembly formed by a central heater and switched between the lower and upper plates and rings. Two identical specimen of the material to be tested are clamped between the two cooling plates and the heater plate assembly. Heater input to central heater measured by voltmeter and ammeter giving the heat flow rate across the specimen. Thermocouple is placed in heater and cooling plated to measure the temperature difference across the specimen

 

View Complete Details

Yes, I am interested!

Thermal Conductivity Of Insulating Powder -heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The unit consists of two thin wall concentric copper spheres. The inner sphere house the heating coil. Heating coil is made up of nichrome wire wound on mica sheet. The insulating powder packed between two shells. Power supply to the heater is given through a dimmerstat& is measured by voltmeter & an ammeter. Temperature can be measured with the help of thermocouples. Four thermocouple are embedded on inner sphere and six thermocouples are embedded on outer sphere. The entire ten temperature indicator, these reading enable of insulating powder.

View Complete Details

Yes, I am interested!

Thermal Conductivity Of Metal Rod - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorRed
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The unit consists of a copper bar, which is heated at one end, a heat sink is provided at other end. The test section of bar is properly insulated and along the length of bar, thermocouples are attached. Heat conducted through the section of bar is measured by heat collection in water cooled heat sink. A panel comprising of controls and measurements is provided, which provides easy operation and study mounting of unit

View Complete Details

Yes, I am interested!

Composite Wall Set Up - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The Heat Transfer through Composite Wall consists of a heater sandwiched between two sets of slabs. Three types of slabs are provided on either side of the heater, which forms a composite structure. A small hand press frame is provided to ensure the perfect contact between the slabs. A variac is provided for varying the input to the heater. Digital Voltmeter and Digital Ammeter display the heat input. Heat produced by heater flows axially on both the sides. Temperature Sensors are embedded at the interfaces of slabs to determine the temperature gradient. The experiment can be conducted at various values of heat input and calculation can be made accordingly.

View Complete Details

Yes, I am interested!

Absorption Column - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
Usage/ApplicationLaboratory
BrandElshaddai
Country of OriginMade in India
ElshaddaiHeat Transfer Laboratory Equipment
Manufacturer ofLab Equipments
Good QualityGood Service

The set up consists of a column fitted with perforated plates. Liquid is fed at the top of the column through distributor. The solute gas and air are measured separately, mixed in a mixing chamber and then passed through the perforated plates vertically upward and absorbed in liquid. All the flow rates can be independently varied to simulate different conditions. Liquid Sample can be taken out from the bottom of the column for analysis

View Complete Details

Yes, I am interested!

Film Wise And Drop Wise Condensation - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The setup consists of an electrically heated Steam Generator (boiler) of about 10ltrs capacity.  Steam is allowed into the drop wise & film wise condensation chambers. The Drop wise condensation chamber consists of a Gold plated copper tube housed in a Glass enclosure. Film wise condensation chamber consists of an identical copper tube. Cooling water is circulated inside the tubes for Condensation, with the help of a Monoblock pump. Heat input and temperatures are measured by Digital Indicators

View Complete Details

Yes, I am interested!

Thermal Conductivity Of Liquids And Gases- Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

Consisting of Hot plate and Cold plate assembly, heater of suitable capacity, chromel-alumel thermocouples, power measurement, digital temperature indicator, flow measurement, heat regulation by electronic voltage regulator and insulation

View Complete Details

Yes, I am interested!

Stefan Boltzmann Apparatus - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service
BrandElshaddai
Colorblue

The apparatus is designed to determine the Stefan Boltzman constant.

The apparatus consists of a hemisphere fixed to a Bakelite plate, the outer surface of which forms the jacket to heat it.

Hot water to heat the hemisphere is obtained form a hot water tank, which is fixed above the hemisphere. The copper test disc is introduced at the center of hemisphere.

The temperatures of hemisphere and test disc are measured with the help of temperature sensors.

The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

View Complete Details

Yes, I am interested!

Helical Coil - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote

Helical Coil - Heat And Mass Transfer Lab Equipment

Rs 65,000 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Usage/ApplicationRESERACH INSTITUTE / INDUSTRY
BrandElshaddai
MaterialMS
Model Name/NumberELSHADDAI-HC
ShapeSquare
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

Helical coils are used for heating or cooling in process tanks. When a fluid flows through a curved tube, centrifugal force acting upon the various elements of fluid moving with different velocities causes secondary circulation. Secondary flow results in higher heat transfer characteristics. Further, secondary flow stabilizes the laminar flow leading to a higher critical Reynolds number for transition from laminar to turbulent flow.

Additional Information:

  • Item Code: ELSHADDAI-HC
  • Delivery Time: 1 WEEK
  • Packaging Details: NORMAL PACKING

View Complete Details

Yes, I am interested!

Heat Pipe Apparatus - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The unit consists of 3 identical cylindrical conductors in respect of geometry. One end of these is heated electrically while there are small capacity tanks acting as heat sinks at the other end. The unit consists of a heat pipe, a copper pipe & stainless steel pipe.
Thermocouples are embedded along the lengths to measure the temperature distribution & the heat transfer rate is noted in terms of the temperature rise in the heat sink tanks

View Complete Details

Yes, I am interested!

Steam Distillation Setup - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

To study the characteristics of Steam Distillation

The feed in the still is heated externally by heater. The vapous form the top of the vessel is condensed in the type condenser by circulating cooling water. Temperature of the feed mixture is controlled by means of a digital temperature Controller. The condensate is collected in a receiver

View Complete Details

Yes, I am interested!

Cooling Tower - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ShapeRectangular
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

This unit is made of fiber reinforced plastics, consists of a blower, packing material for increasing the contact between water and air, water re circulation pump with a sump tank connected with a heater. The temperature of the in& outlet water.  Wet bulb thermometer is provided to measure the moisture content in the outlet air thereby can be used to measure evaporation losses.

View Complete Details

Yes, I am interested!

Rotating Disc Contactor - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlack
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

A rotating disc contactor comprising a tubular shell providing a mechanically uninterrupted chamber, one end of which is higher than the other; a rotor shaft which is substantially coaxial with said chamber and is mounted for rotation therein; means for rotating said shaft

View Complete Details

Yes, I am interested!

Drag Coefficient Apparatus - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ShapeRectangular
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The whole set-up is well designed and arranged in a good quality painted structure having the tube light arrangement

· Stop Watch

· Electronic

· Material Borosilicate Glass tube

· Gate Valves

· 6 Nos. (2 Nos. on each Tube)

· Tubes (3 Nos.)

View Complete Details

Yes, I am interested!

Ion Exchange Column - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
Usage/ApplicationLaboratory
BrandElshaddai
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The basic unit consists of two columns, one contains cation resin and the other contains anion resin. The feed water is pumped by a FHP pump and the capacity of the ion exchanger is 50 lph.

View Complete Details

Yes, I am interested!

Simple Distillation Setup - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
Usage/ApplicationChemical Laboratory
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service
EEEElshaddai Engineering Equipments

To study the characteristics of Simple Distillation.

The vapous form the top of the vessel is condensed in the type condenser by circulating cooling water. Temperature of the feed mixture is controlled by means of a digital temperature Controller. The condensate is collected in a receiver

View Complete Details

Yes, I am interested!

Agitated Vessel - Heat Transfer Laboratory Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

Tank bottom is rounded to eliminate regions into which the fluid currents would not penetrate.In the present set-up agitation is done with the help of stirrer. A dc motor is coupled to impeller and shaft. The speed of agitator can be varied with the help of thristor controlled dc drive and power consumption is measured by digital voltmeter and digital ammeter. Four replaceable baffles are provided to prevent swirling. One propeller and one turbine are provided which are interchangeable. Drain valve is also provided at the bottom. The whole set-up is mounted on a rigid ms frame structure

View Complete Details

Yes, I am interested!

Vortex Tube Apparatus - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

EXPERIMENTAL SETUP :

1. Vortex tube assembly
2. Pressure control valve.
3. Two Separate Chambers.
4. Nozzle, Diaphragm & orifice assembly
5. Set of thermocouples.

View Complete Details

Yes, I am interested!

Emissivity Measurement Set Up - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
Country of OriginMade in India
BrandElshaddai
ColorBlue
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The test plate comprises a mica heater sandwiched between two circular plates. Black plate is identical with test plate, but its surface is blackened. As all the physical properties, dimension and temperature are equal heat losses from both plates will be same except radiation loss. Hence the input difference will be due to the difference in emissivity. Both plates are supported on individual brackets in an enclosure with one side glass to ensure steady atmospheric conditions. Temperature Sensors are provided to measure the temperature of each plate and surrounding. Electric Supply is given to heaters through separate variances so that temperatures of both can be kept equal and is me assured with Digital Voltmeter and Digital Ammeter.

View Complete Details

Yes, I am interested!

Pin Fin Apparatus - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
Country of OriginMade in India
BrandElshaddai
ColorBlue
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The unit consists of a brass or aluminum fin of a circular cross section fitted across at one end of a long rectangular dust.
The other end of the duct is connected to suction side of the blower and the air flows past the fin perpendicular to its axis. One end of the fin projects outside the duct & is heated by an electric heater. Temperature at five points along the length of the fin is measured by thermocouples. The blower is not run in natural convection condition while it is run in forced convection conditions. The air flow rate can be varied by control valve on delivery side of the blower.

View Complete Details

Yes, I am interested!

Parallel Counter Flow Apparatus - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
Country of OriginMade in India
ColorBlue
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The unit consists of a tube in tube type concentric tube type exchanger hot fluid flow through inner tube and cooling water flows through the annulus. The apparatus is mounted on a board with system of valves and pipes. The heat exchanger arranging to instruction shown on board. Hot fluid flows always in one direction & cold fluid flow direction can be changed accordingly. Inlet temperature of heat exchanger can be measured by thermometers. A electric geyser is used to heat the water. Outer tube of the heat exchanger is provided with adequate thermocouple insulation to minimize the heat losses.

View Complete Details

Yes, I am interested!

Plate Type Heat Exchanger - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. This facilitates the transfer of heat, and greatly increases the speed of the temperature change

View Complete Details

Yes, I am interested!

Open Pan Evaporator - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
Country of OriginMade in India
ColorBlue
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

Open Pan Evaporator is a process for concentrating a solution by vaporizing part or all of the solvent. In most of the cases the solvent is water. The pan evaporator set-up is designed to study the fundamentals of evaporation process. The set-up consists of a jacketed pan evaporator made of stainless steel and an electrically heated steam generator of suitable capacity.To evaporate the solution in pan, steam is allowed to enter in the jacket using a control valve. Condensate is collected from steam trap for energy measurement. Tilting is done by a worm gear arrangement to empty the pan.

View Complete Details

Yes, I am interested!

Vertical Condenser And Horizontal Condenser - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
ColorBlue
BrandElshaddai
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The present set-up offers a comparative study of vertical & horizontal condenser, which can be operated one at a time. Condenser consists of stainless steel shell, with stainless steel tubes. Cold fluid flows through inside the tubes and steam flows through the shell. Valves are provided to control the flow rates of cold fluids. Flow rate of cold water is measured using a rota meter. Shell is fitted with steam traps from where condensate is collected in measuring cylinder. Temperature of inlet and outlet of both hot & cold fluids are measured by temperature sensors

View Complete Details

Yes, I am interested!

Boiling Heat Transfer Unit - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
Country of OriginMade in India
ColorBlue
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

This unit allows the student to see the processes taking place inside a transparent cylinder and measure temperatures and heat flux under steady state conditions

View Complete Details

Yes, I am interested!

Lagged Pipe Apparatus - Heat and Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The unit consists of a three concentric pipes of a very small thickness as compared to diameter. They are arranged concentrically over two supports and closed with the help of two disces. The annual in between the cylinders are filled completely by two different insulating materials. Thermocouples at proper position are used to measure the temperature. Inside the inner pipe a nicrome wire heater is placed. Heat input to the heater is given through a variac and measured by a voltmeter and ammeter.

View Complete Details

Yes, I am interested!

Tray Dryer - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote

Tray Dryer - Heat And Mass Transfer Lab Equipment

Rs 65,000 / PieceGet Latest Price

BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The unit consists of a blower, an air heater attached with a temperature controller, a triple beam balance for measuring the loss of moisture

View Complete Details

Yes, I am interested!

Separating And Throttling Calorimeter - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
Colorwhite and blue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The apparatus is used to find out dryness fraction of steam by combined Separating & Throttling Calorimeter. The Setup is Complete in itself, provided with Boiler, so need of an extra boiler to supply steam’s steam generator is provided at the base of the apparatus. A Digital Temperature Controller is provided at the front apparatus to control the temperature inside the steam generator. Steam from steam generator is passed from separating calorimeter where most of water particles get separated from steam and passed of throttling calorimeter where steam gets superheated. After that superheated steam is passed through heat exchanger to condense the steam. A manometer and Digital Temperature controller are connected with throttling calorimeter to measure the pressure and temperature after throttling process

View Complete Details

Yes, I am interested!

Heat Flux Apparatus - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
Country of OriginMade in India
ColorBlue
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The standard instrumentation consists of a surface temperature thermocouple plus four glass thermometers, wattmeter, pressure gauge and water flowmeter. These enable all relevant heat transfer calculations to be made

View Complete Details

Yes, I am interested!

Unsteady State Heat Transfer  - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
Country of OriginMade in India
ColorBlue
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The unit consists of small test cylinder. The cylinder is heated by a hot bath, till steady state is reached and then cooled in air or water bath. During both, heating & cooling, temperature of the cylinder is function of time & hence heating & cooling of cylinder are unsteady state heat transfer process. The temperature of test cylinder is measured with the help of thermocouple. The hot oil bath is provided with heater with input control for experimentation of different bath temperatures

View Complete Details

Yes, I am interested!

Leaching Column Set Up / Leaching Studies & Conical Flask - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
Usage/ApplicationLaboratory
BrandElshaddai
Country of OriginMade in India
ElshaddaiElshadai Engineering Equipments
Manufactuer ofLab Equipments
Good QualityGood Service

Leaching is the process by which soluble constituents are dissolved from a solid material (such as rock, soil, or waste) into a fluid by percolation or diffusion.

View Complete Details

Yes, I am interested!

The Critical Heat Flux Apparatus - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
Country of OriginMade in India
ColorBlue
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The apparatus consists of a cylindrical glass container containing distilled water. The heating surface is in the form a nichrome heater wire completely submerged in the water. There is another heater submerged in the water to initially heat the water up to the required temperature to study the Critical heat flux phenomenon at various bulk temperatures. The temperature of the water in the container & the temperature of the test heater are measured with the help of thermocouples. Electrical supply to the test heating is given through a variac & power input is measured with the help of a Voltmeter & an Ammeter. Heat flux can be calculated with the power input & diameter of the test heater. The burn out point will differ from theoretical prediction due to practical limitation. However, the burn out point can be visualized & the graph Heat Flux Vs Temperature difference can be drawn up to experimental burn out point.

View Complete Details

Yes, I am interested!

Single Effect Evaporator - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
Country of OriginMade in India
ColorBlue
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

Evaporation deals with the concentration of a non-volatile solute from a solution by the removal of required amount of volatile solvent. Usually the solvent is water. By vaporizing a part of the solvent, useful product i.E. The concentrated solution or thick is produced and the vapour is discarded. Long tube evaporators are usually used for the concentration of foamy liquids.The set-up consists of stainless steel tubes surrounded by a stainless steel jacket and fitted with accumulator. Dilute solution is feed to tubes. Steam from a steam generator is supplied to shell to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator is recycled through the evaporator.

View Complete Details

Yes, I am interested!

Shell And Tube Heat Exchanger - Heat And Mass Transfer Lab Equipment
Interested in this product?
Get Best Quote
BrandElshaddai
ColorBlue
Country of OriginMade in India
ElshaddaiElshaddai Engineering Equipments
Manufacturer ofLab Equipments
Good QualityGood Service

The apparatus consists of fabricated shell, inside which tubes with baffles on outer side are fitted. The present set up is a 1-2 heat exchangers, with cold water flows through shell. Valves are provided to control the flow rates of hot and cold water. Flow rates of hot and cold water are measured using Rotameters. A magnetic drive pump is used to circulate the hot water from a re-cycled type water tank, which is fitted with heaters and Digital Temperature Controller.

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

Elshaddai Engineering EquipmentsOld No. 2, New No. 3, S. V. Koil Street, Sekar Nagar elshaddaieeatgmail.com, Ashok Nagar, Chennai-600083, Tamil Nadu, India

Jenny (Admin)

View Mobile Number87% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)