Elshaddai Engineering Equipments

• The displacement suffered by core is indicated by 3½ Digit LED display in mm. 
• It will be same as read on micrometer. The main scale of micrometer (sleeve) is of 25 mm. 
• Least count of main scale is 1 mm. 
• Circular scale on Thimble is of 1mm with least count 0.01 mm. 
• On one circular rotation of thimble, the spindle will displace LVDT core 1 mm

In addition to testing applications, autocollimators can be used to measure the

• radius of concave and convex spherical surfaces
• back focal of lenses and optical systems
• centration error of spherical surfaces
• centration error of lenses in transmission
• parallelism or perpendicularity of two surfaces

Additional applications include the

• radius measurement of concave and convex spherical surfaces
• relative measurement of the angular error of prisms
• pitch and yaw measurement of slides
• parallel setting of rolls

Additional Information:

• Item Code: ELSHADDAI-MTR-007
• Production Capacity: 200
• Delivery Time: 15 DAYS
• Packaging Details: PACKED WITH WOODEN BOX

• Dial gauge:1 no,
• Micrometer:0.005mmLC
• minor Dia, 1.32mm
• Master cylinder:16mm
• Work peice:16.20mm
• Prism:2 nos
• Method: Two wire method

Elshadai Floating Carriage Micrometer is designed to have accurate measurements of major, minor effecive diameter of precision screw threads as well as those of odd flutes screw taps. All guide ways and wearing parts are hardened and ground

• Dial gauge: 1 no | micrometer: 0.005 mm LC |minor Dia 1.32 mm | Master Cylinder: 16 mm|
• Work piece: 16.20mm | Prism: 2 nos | Method: Two wire method

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

• Drive os of a 1/4 HP single phase
• 220 volts A.C.T.E.F.C. motor, make these machines able for speedy performance 
• With 400 to 1100 RPM speed. Machines offered by us are very sturdy in construction and accurate in dimension. 

Additional Information:

• Delivery Time: 1 WEEK
• Packaging Details: WOOD / NORMAL PACKAGE

• Work Base : A high chrome high carbon, hardened, ground & lapped block is  attached to the base at the centre,  below arm holding electronic probe
• Probe : A precision electronic probe is provided with  the unit with a measuring range  of  + / -  2.0  m.m
• Counter : A single line display counter unit is provided which displays signal from probe in digital form. Resolution of this unit is selectable -0.0001 m.m, 0.001 m.m. Zero  can be  reset

Additional Information:

• Item Code: ELSHADDAI-ML-030

The scale may be calibrated by means of gauge block (slip gauges) to indicate any deviation from an initial sitting.

Comparators using this type of linkage have sensitivities of the order of 0.25 micron per scale division.

The mechanical amplification is usually less than 100, but it is multiplied by the optical lens system. It is available in amplifications ranging from × 500 to × 1000

Additional Information:

• Item Code: ELSHADDAI-ML-027

Elshaddai’s Tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyse the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement.

We are suppliers of Bore Gauge.

Specifications:

Range: (18 – 35 mm)

Additional Information:

• Item Code: ELSHADDAI-ML-024

• Range: 360 Deg,
• LC:5Min, it is capable of measuring from 0 to 360°. the vernier scale has 24 divisions coinciding with 23 main scale divisions. thus the least cout of the instrument is 5.
• This instrument is most commonly used in workshops for angular measurements till more precision is required

Additional Information:

• Item Code: ELSHADDAI-ML-012

Load Measurement Trainer comprises of strain gauge based load cell,loading arrangement to load in compression, weights and digital load indicator to read the load in Kg.

·      Torque Indicator Display Range : 31/2 digit RED LED display of 200 mV FSD to read

·         up to +/-1999 counts.

·         Accuracy: +/-0.5% of FSD

·         Resolution: +/- 0.01 Kg-MS

·         Bridge Excitation: 10V DC

·         Calibration: Directly loading sensor at 1meter arm length 1.00 Kg-m

Torque Measurement Trainer comprises of strain gauge based reaction type torque transducer, fulcrum arm of 1 M length with L angle to mount the sensor, Pan & weights with digital torque indicator to read the torque in Kg-m.

Additional Information:

• Production Capacity: 10
• Delivery Time: 15 DAYS
• Packaging Details: WITH WOODEN PACKING

We offer an extensive range of Speed Measurement Trainer which comprises of a DC Motor, which is fixed rigidly on a strong metal stand. It is equipped with four digit digital tachometer is provided along with the above setup which is calibrated to read the speed up to 1500 RPM.

Elshaddai’s Tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyse the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement

Tool Dynamometer - Milling Tool Dynamometer

Elshaddai’s Tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyse the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement 

We are suppliers of Light Dependant Resistance Measurement Trainer L.D.R. Trainer comprises of light dependent resistor (LDR) fitted to the shaft, which moves inside the tube where lamp is fitted at the other end. Variable DC voltage source is provided to vary the light intensity. Digital indicator is supplied to measure the light intensity in terms of distance moved between LDR and light source.

Force can be measured by different methods, one of the most effective and accurate method is by using strain gauge based load cells. Four Transducer class strain gauges are bonded on the specimen and are connected in the form of Whetstone Bridge. The specimens are of different types depending on the requirement such as S, column, beam, ring, shear beam, binocular etc