Embedded Design Solutions

Rated Speed	1200 RPM
Power	6 W
Phase	Single Phase
Usage/Application	Robotics
Voltage	3-12V
Color	Yellow

This product is one of the most commonly used L-shaped DC gear motor for robotic applications. It is very common for prototyping the robotics projects and see its working and response as they are rugged, low cost, easy to use and easy to control. It does not provide high torque or RPM but it gets the work done. It can also rotate in both the directions hence you can control the direction of rotation of motor by reversing the polarity of the supply. It comes with two screw holes to mount it easily with the chassis of the robot. It is commonly used in line follower Robots and Obstacle Avoider Robot.

 

Specifications

• Operating Voltage: 3V to 12C
• Current under no load: 40-180mA
• Rated speed: 100 RPM
• Rated torque: 0.35 kgcm
• Low Weight and Low Inertia
• Low coefficient of Friction

Power	1000 W
Rated Speed	90 RPM
Phase	Single Phase
Usage/Application	Industrial
Voltage	15v
Color	Varies

Selecting the right DC gear motor is troublesome for the robotics project. However, This DC Geared motor can be used for heavy-duty applications, robotics, or in any industrial or educational applications. It has a wide range of features for obtaining the optimal performance characteristics. It is very easy to use and does not need expensive motor control circuitry.

The 12V DC Motors are very popularly used in robotics applications. The gearbox of the motor helps in providing greater torque that is required to drive robotic vehicles. Based on the gearbox design the RPM and Torque of the motor will vary. This particular motor is rated for 100 RPM and 2.9kg/cm Torque.  The motor also comes with a hex nut to making the mounting process easier. 

This DC Motor has 100RPM and the voltage rating of 12Volts that is a useful specification to make this geared motor as a retro fitable in all-terrain robots and a variety of robotic projects. The motors shaft has a 3 mm threaded drill hole in the middle which is very useful for mechanical assembly.

 

Geared motor features and specification:

Specification:

• Gear Type: Plastic
• RPM: 100
• Working Voltage (VDC): 4-12V (12V recommended and maximum)
• Torque (kg - cm): 5
• Load Current Max: 300mA
• No-Load Current (mA): 60mA
• Rated Torque: 2.9kg-cm
• Stall Torque: 11.4kg-cm

 

Geared Motor Applications:

• Robotics
• Controlling Wheels
• Industrial application
• Educational projects
• Different motor related applications

Power	30 HP
Shaft Length	7 mm
Shaft Diameter	5.5 mm
Voltage	9 V
Phase	Single Phase
Speed	100 RPM
Application	For Industrial Use

The 100 RPM Single Shaft BO Motor - Straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors.

It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots.

The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

 

Specifications:

• Shaft length: 7 mm
• Shaft Diameter: 5.5 mm 
• Size: 55 x 48 x 23 mm.
• Operating Voltage: 3 to 12V.
• Current (without loading): 40-180mA.
• RPM: 100 rpm.
• Output Torque: 0.35 kg cm.

 

Features:

• Cost-effectiveness of the injection-molding process.
• Elimination of machining operations.
• Low density: lightweight, low inertia.
• Uniformity of parts.
• Capability to absorb shock and vibration as a result of elastic compliance.
• Ability to operate with minimum or no lubrication, due to inherent lubricity.
• The relatively low coefficient of friction.
• Corrosion-resistance; elimination of plating, or protective coatings.
• The quietness of operation.
• Tolerances are often less critical than for metal gears, due in part to their greater resilience.
• Consistency with the trend to greater use of plastic housings and other components.

Power	1000 W
Rated Speed	200 RPM
Phase	Single Phase
Usage/Application	Industrial
Mounting	Mounted on mechanical shaft of motor
Color	yellow black white

Mobile DIY projects like robots, project vehicles and mobile platforms require wheels in order to move from one place to another. These projects are often powered by the DC motors which might be simple geared DC motor or L shaped DC geared motor etc. without additional mounting screws. These wheels are very easy to use and can be easily mounted on the mechanical shaft of the motor and used accordingly. You can use multiple wheels according to your requirement and axis of freedom you can select the number of wheels required in your project. It is light weight and sturdily built with rubber tracks on them to increase grip and friction to provide additional traction.

Specifications

• Rubber grip for additional grip
• Sturdy build
• No need for mounting bolts
• Mounted on mechanical shaft of motor