Emerging Technologies

Type	Automatic
No of Inputs	1
Float Switch	Yes
Mounting Type	Panel Mount
Range	11-15m
Output Type	Digital
Brand	emerging
Feature	Corrosion Resistant

Product Name: Water Level Sensor;
Float Ball Size: 18 x 16mm(D*H);
Screw Thread Diameter: 7.5mm/0.3"
Washered Nut Diameter: 12.5mm/0.49";
Retaining Clip Diameter: 13mm/0.5" * Wired Liquid Water Level Sensor Float Switch for Aquarium
* Max Contact Rating:10W;
* Max Switch Voltage: 100V DC;
* Max Switch Current: 0.5A;
* Max Breakdown Voltage: 220V DC;
* Max Carry Current: 1.0A;
* Max Contact Resistance: 100mΩ;
* Temperature Rating: -10 ~ 85 Degree;
* Float Ball Material: P.P;
* Float Body Material: Plastic.
* Body Total Length: 45mm/1.8";
* Cable Length: 36cm/14"
* Color: White & Yellow;
* Weight: 10g;
* Package Content: 1 x Water Level Sensor
* A float switch is a device used to sense the level of liquid within a tank.
* The switch may actuate a pump, an indicator, an alarm, or other device.
* Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever your project may be.
* It can be easily converted from normally open to normally close by inverting the float.
* Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay and contactor are not included here.

Additional Information:

• Item Code: p45

The sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit infrared certain frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube, After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V. Detection range of the sensor can be obtained by adjusting potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions.Module ParametersWhen the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.2, the sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance. Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.3, the sensor module output port OUT port can be directly connected to the microcontroller IO can also be directly drive a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO4, comparators LM393, stable;5, the module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;6, with the screw holes 3mm, easy fixed installation;7, board size: 3.2CM * 1.4CM8, each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.Module Interface Description1 VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)2 GND GND External3 OUT small board digital output interface (0 and 1)