Embeddinator (A Brand Of Engenius Lab)

74HC14D,653 – 6V Hex Inverting Schmitt Trigger IC Note: 1. Product Images are shown for illustrative purposes only and may differ from the actual product. 2. For Technical Specifications about the IC go through the Datasheet in the Attachment section. Package Includes: 1 x 74HC14D,653 – 6V Hex Inverting Schmitt Trigger IC SMD-14 Package

To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Embeddinator 8051 Microcontroller Development Board With USB Programmer Combo Kit.

• 350g

Additional Information:

• Item Code: B074SZ5P2F

 Powered by a 5V DC supply through a USB interface, it offers easy integration with a variety of electronic devices and power sources. With its adjustable frequency feature, users can fine-tune the mist intensity according to their specific needs. Its compact design ensures easy installation and suitability for various setups, while low power consumption makes it ideal for prolonged operation, including battery-powered applications. Safety features such as overheat protection enhance reliability, ensuring the module’s safe and efficient performance. Overall, this module provides DIY enthusiasts with a versatile and efficient solution for enhancing humidity control in their projects, backed by comprehensive user manuals for seamless integration and operation.

It is a 108KHz 20mm USB Humidifier with a driver. It will keep working after power-ON.

1. Come with a driver.
2. Power-ON trigger work
3. 108KHz high-frequency oscillator
4. Micron level aperture
5. The glazed surface of the atomized sheet

1. Product name: 108KHz 20mm USB Humidifier
2. Work Voltage: DC 4.5V~5.0V
3. Work Power:2W.
4. Work Frequency:108KHz(+/-3KHz)
5. Power Type: Female USB Socket
6. Diameter without rubber ring:16mm
7. Diameter with rubber ring:20mm
8. Spray Diameter:5um.
9. Spray hole:740 holes.
10. Spray speed:50ml/h.
11. Work Temperature:0℃~85℃
12. Work Humidity:10%~90%RH.
13. Driver Size:35*19*15mm

1 x 108KHz 20mm USB Humidifier

On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board Reset buttons, Bluetooth Interface (HC-05), Buzzer*All Port 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications*Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports ATmel 8051,8052,8032/31 Series Microcontrollers

On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board External Interrupt and Reset buttons, Built in Potentiometer interface to ADC, Temperature Sensor Interface (LM35) & Bluetooth Interface (HC-05) Connector, Buzzer*Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports AVR ATMEGA16, ATMEGA32, ATMEGA8535 Microcontrollers*All Port & 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications*Specially Design by R&D experts for beginner, learner, project lover, engineer, hobbyist for implementing your imagination code in real world of digital electronics, embedded system & robotics

Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports AVR ATMEGA16, ATMEGA32, ATMEGA8535 Microcontrollers*On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board External Interrupt and Reset buttons, Built in Potentiometer interface to ADC, Temperature Sensor Interface (LM35), Bluetooth Interface (HC-05), Buzzer*All Port 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications*Screw terminal for External power Supply (with Jumper Select Option) & External Power Supply range of 7V to 20V with 7805 on board for Internal +5v Supply

On Board ATmega8 microcontroller Board with Bootloader Software, L293D & HT92B70 IC, On Board L293D Motor Driving Circuit, Mobile phone decoder HT92B70 Circuit, 16x2 LCD Header, Buzzer, 4 Switch for input, 4 LED for output,*No Separate Programmer required for board, it can easily program by USB Communication using Bootloader mode, Specially Designed Bootloader Mode that run on 12MHz by using BOOT Button on board*23 Pin breakout are available for outside device interfacing, On board voltage regulator available for sourcing regulated 5V @ upto 1A voltage to the board and connecting circuit.

Specially designed bootloader mode by using boot button on board, no need of separate programmer.*directly to usb programmable board with boot feature & also built in 4 led interface to test I/o, bluetooth interface (hc-05), with inbuilt circuit of motor driving l293d on board.*23 pin breakout are available for outside device interfacing, which used in 20+ project you can developed on this board by using various outside devices

The ATMEGA8A-AU is an 8-bit high-performance low-power AVR RISC-based Microcontroller combines 8kB ISP flash memory with read-while-write capabilities, 512B EEPROM, 1kB SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a byte-oriented.

It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has a strong ability of anti-jamming and has the function of air wake-up Consumption. The SX1278 RF module is mainly used for long-range spread spectrum communication, and it can resist Minimizing current consumption. The SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, and a long transmission

EnGeniusLab bring a IR & TSOP Combination with relay module which comes with timer & range adjuster, it is specially design for 500/1000/2000/5000 ml automatic hand sanitizer machine. It is 9/12V operated device which can run & give output 12V output submersible & feeder pump.

This is not normal IR Sensor, but it is fully programmed IR Sensor with Pump set in which user can adjust the timer & ranger as per their choice, Apart from this it required only 9/12 Volt for operate it means it can work on rechargeable batteries. It can work 100% in sunlight i,e work in indoor/outdoor perfectly. It is best for Soap & Gel.

Additional Information:

• Production Capacity: 500
• Delivery Time: 2

This is ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32.

ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

STM8 applications use the USB full speed interface to communicate with ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

In addition, to provide the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 Vrms.

Additional Information:

• Delivery Time: 1 Day

ST-Link V2 Programmer For STM8 and STM32 is fully consistent with the official version, support for automatic upgrades, support the full range STM32 SWD (only 4pins including SWCLK, SWDIO, and power) and a full range STM8 SWIM (only 4pins including SWIM, Reset and power) download and debug.

Use this device to send program code to the 32-bit STM32 ARM Cortex or 8-bit STM8 microcontrollers. The header for this ST-Link v2 programmer contains connections for 5V, 3.3V, SWCLK, SWDIO, SWIM, Reset (RST/NRST) and GND. The connector on the opposite side of this device is a USB connector and is intended to be plugged into the computer.

The EnGeniusLab introduce compact & industrial PIC development Board can be used to evaluate and demonstrate the capabilities of Microchip PIC series microcontroller. It is a great way to start working with latest range of microcontrollers the PIC series.
The board is ideal for experimenters or as a main CPU board for a more advanced digital system. The MCU socket on board provides support for 40 pin DIP package of PIC16F778A controller. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. It is a fantastic tool for code debugging, development and prototyping. The all new board design have made it much more user-friendly than its predecessors, ideally suitable for training and development purposes. The components used in this board are of high quality and the PCB is high quality PCB, which makes this board especially durable. When you start using the EnGeniusLab Development Board you will find it to be one of the best development tool available for Microchip PIC controller.

Additional Information:

• Item Code: B06Y1881ZH

Additional Information:

• Delivery Time: 1 Day

It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly

HT12E is an encoder integrated circuit of 212 series of encoders. They are paired with 212 series of decoders for use in remote control system applications. It is mainly used in interfacing RF and infrared circuits. The chosen pair of encoder/decoder should have same number of addresses and data format. Simply put, HT12E converts the parallel inputs into serial output. It encodes the 12 bit parallel data into serial for transmission through an RF transmitter. These 12 bits are divided into 8 address bits and 4 data bits. HT12E has a transmission enable pin which is active low. When a trigger signal is received on TE pin, the programmed addresses/data are transmitted together with the header bits via an RF or an infrared transmission medium. HT12E begins a 4-word transmission cycle upon receipt of a transmission enable. This cycle is repeated as long as TE is kept low. As soon as TE returns to high, the encoder output completes its final cycle and then stops. Features of HT12E Encoder IC:- Operating voltage 2.4V~12V. Low power and high noise immunity CMOS technology. Low standby current: 0.1A (typ.) at VDD=5V. Data code has positive polarity. HT12A with a 38kHz carrier for infrared transmission medium. Minimum transmission word Four words for the HT12E. Built-in oscillator needs only 5% resistor. Minimal external components. Applications of HT12E Encoder IC:- Burglar alarm system. Smoke and fire alarm system. Garage door controllers. Car door controllers. Car alarm system. Security system. Cordless telephones. Other remote control systems.

This Voice microphone is Multi-Channel and is suitable for mobile phones, telephones, tape recorders, voice-activated toys, computers, and other products. The sensitivity is in accordance with the IEC standard, and the sensitivity of “pa” is increased by 20dB,

A pair of Infrared LED and Photo diode tuned to same IR wavelength can be used for multiple applications.

This Laser Module 650nm 5V is very easy to use, you can use Arduino control, do controllable laser pointer, theft detection, etc. interesting application devices.

KK 2.1.5 Multi-rotor LCD Flight Controller with MPU Best for Quadcopter, Firmware version: 1. 6: Pre-installed firmware., Dual copter, tricopter, y6*ATmega 644 pa, gyro/acc: 6050Mpu invensense inc, Auto-Level: Yes IC: ATmega 644 Pa, Gyro/Acc: 6050MPU Invensense Inc and Auto-Level: Yes Signal to ESC: 1520us*050 MPU system based. Signal from Receiver: 1520us (5 channels)Signal to ESC: 1520us Easy graphical interfacing with receiver. In Built firmware. Easy to use for beginners.And the Size is : 50.5mm x 50.5mm x 12mm Weight: 21 gram

On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board External Interrupt and Reset buttons, Built in Potentiometer interface to ADC, Temperature Sensor Interface (LM35), Bluetooth Interface (HC-05), Buzzer*All Port 35 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications*Screw terminal for External power Supply (with Jumper Select Option) & External Power Supply range of 7V to 20V with 7805 on board for Internal +5v Supply*Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports Microchip's PIC16F877A, PIC16F887A, PIC18Fxx microcontrollers

Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Supports Microchip's PIC Series microcontrollers like PIC10F , PIC12F PIC16F , PIC18F , PIC24 dsPIC30, dsPIC33. Compatible With Windows- XP, Vista, 7,8,10 & Linux Also*On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board External Interrupt and Reset buttons, Built in Potentiometer interface to ADC, Temperature Sensor Interface (LM35), Bluetooth Interface (HC-05), Buzzer*All Port 35 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications*6 Pin Male Connector along with the programmer for Standard ISP connections with B-type USB Connector for power & Separate Two Different LED's for power & programmer status. Programs all current 8-, 16-, and 32-bit PIC microcontrollers

HT12E is an encoder integrated circuit of 212 series of encoders. They are paired with 212 series of decoders for use in remote control system applications. It is mainly used in interfacing RF and infrared circuits. The chosen pair of encoder/decoder should have same number of addresses and data format. Simply put, HT12E converts the parallel inputs into serial output. It encodes the 12 bit parallel data into serial for transmission through an RF transmitter. These 12 bits are divided into 8 address bits and 4 data bits. HT12E has a transmission enable pin which is active low. When a trigger signal is received on TE pin, the programmed addresses/data are transmitted together with the header bits via an RF or an infrared transmission medium. HT12E begins a 4-word transmission cycle upon receipt of a transmission enable. This cycle is repeated as long as TE is kept low. As soon as TE returns to high, the encoder output completes its final cycle and then stops. Features of HT12E Encoder IC:- Operating voltage 2.4V~12V. Low power and high noise immunity CMOS technology. Low standby current: 0.1A (typ.) at VDD=5V. Data code has positive polarity. HT12A with a 38kHz carrier for infrared transmission medium. Minimum transmission word Four words for the HT12E. Built-in oscillator needs only 5% resistor. Minimal external components. Applications of HT12E Encoder IC:- Burglar alarm system. Smoke and fire alarm system. Garage door controllers. Car door controllers. Car alarm system. Security system. Cordless telephones. Other remote control systems.

Additional Information:

• Delivery Time: 1 day

The L293D is a dual H-Bridge motor driver IC commonly used in embedded systems, robotics, and electronics projects to control DC motors, stepper motors, and other inductive loads. It provides a simple interface for driving motors in both directions (forward and backward), as well as controlling motor speed using pulse-width modulation (PWM).

The L293D is widely used because it allows low-power control signals, typically from a microcontroller (like an Arduino), to drive motors requiring higher voltages and currents.

Specially Designed for Various Robotic Project without microcontrollers with Male berg strip given for connection & run properly & also Extra Berg strip given for GND, +5V & +9V for external connection.*With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller*Widely used in Robotics, Motor Driving Applications & Heavy Project Applications.* Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.

HT12D is a decoder integrated circuit that belongs to 212 series of decoders. This series of decoders are mainly used for remote control system applications, like burglar alarm, car door controller, security system etc. It is mainly provided to interface RF and infrared circuits. They are paired with 212 series of encoders. The chosen pair of encoder/decoder should have same number of addresses and data format.In simple terms, HT12D converts the serial input into parallel outputs. It decodes the serial addresses and data received by, say, an RF receiver, into parallel data and sends them to output data pins. The serial input data is compared with the local addresses three times continuously. The input data code is decoded when no error or unmatched codes are found. A valid transmission in indicated by a high signal at VT pin. HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits. The data on 4 bit latch type output pins remain unchanged until new is received. Specifications & Features of HT12D Decoder IC:- Operating voltage: 2.4V~12V Low power and high noise immunity CMOS technology Low standby current Capable of decoding 12 bits of information Binary address setting Received codes are checked 3 times Address/Data number combination HT12D: 8 address bits and 4 data bits Built-in oscillator needs only 5% resistor Valid transmission indicator Easy interface with an RF or an infrared transmission medium Minimal external components Pair with Holteks212 series of encoders 18-pin DIP Applications of HT12D Decoder IC:- Burglar alarm system Smoke and fire alarm system Garage door controllers Car door controllers Car alarm system Security system Cordless telephones Other remote control systems

BC547 is a general-purpose NPN bipolar junction transistor (BJT) widely used for low-power switching and amplification in electronic circuits.

General-purpose transistors SMD plastic packages Three different gain selections AEC-Q101 qualified

Mounting Type SMD Usage/Application Electronics Brand TEXAS Operating Temperature 125 Degree Celsius Model Name/Number 74HC14D

Outer Diameter: 33mm; No. of teeth: 12; Thickness (Teeth Portion): 10mm; Teeth Type: Helical Left Hand