Embeddinator (A Brand Of Engenius Lab)

The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 4 better than the 3? How about a faster processor, USB 3.0 ports, and updated Gigabit Ethernet chip with PoE capability? Good guess - that's exactly what they did!

The Raspberry Pi 4 is the latest product in the Raspberry Pi range, boasting an updated 64-bit quad core processor running at 1.5GHz with built-in metal heatsink, USB 3 ports, dual-band 2.4GHz and 5GHz wireless LAN, faster Gigabit Ethernet, and PoE capability via a separate PoE HAT.

This version has 1 GB of RAM, we also have 2 GB and 4 GB versions.

You can still use all your favorite Raspbian or PIXEL software with this update. You MUST make sure to upgrade your Raspbian operating system install to the latest version so that the firmware can support the new chips! Old SD cards from previous releases will not work without a upgrade!

The dual-band wireless LAN comes with modular compliance certification, that's the metal tin in the corner of the Pi, with the logo stamped on it. This allows the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.

What’s New in Raspberry Pi 4 B?

1. 1GB/2GB/4GB Varients
2. Quad-Core 64-bit Broadcom 2711, Cortex A72  Processor
3. WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
4. LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
5. Operating Power 5V@3A  via USB Type-C Port
6. Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p

Additional Information:

• Delivery Time: 1 Day

Raspberry Pi 3 Model B+ Built-in Broadcom 1.4GHz quad-core 64 bit processor with low energy on-board Wi-Fi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.5A adapter is required. Broadcom BCM2837BO 64 bit ARMv8 Quad Core A53 64bit processor powered single board computer run at 1.4GHz- 1GB RAM - BCM43143 Wi-Fi on board. Bluetooth Low Energy (BLE) on board. 40 pin extended GPIO - 4 x USB2 ports. 4 pole Stereo output and composite video port. Full size HDMI. CSI camera port for connecting the Raspberry Pi camera. DSI display port for connecting the Raspberry Pi touch screen display. Micro SD port for loading your operating system and storing data. Upgraded switched Micro USB power source (now supports up to 2.5 Amps.)

Additional Information:

• Delivery Time: 1 Day

• 1.2GHz Quad-Core ARM Cortex-A53 With 1GB RAM and 64 Bit CPU
• 802.11 bgn Wireless LAN and Bluetooth 4.1
• 4 x USB ports ,4 pole Stereo output and Composite video port and 40 Pin Extended GPIO To Enhance Your "Real World" Projects
• Camera interface (CSI), Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), Video Core IV 3D graphics core
• Micro SD slot for storing information and loading your operating systems

The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 4 better than the 3? How about a faster processor, USB 3.0 ports, and updated Gigabit Ethernet chip with PoE capability? Good guess - that's exactly what they did!

The Raspberry Pi 4 is the latest product in the Raspberry Pi range, boasting an updated 64-bit quad core processor running at 1.5GHz with built-in metal heatsink, USB 3 ports, dual-band 2.4GHz and 5GHz wireless LAN, faster Gigabit Ethernet, and PoE capability via a separate PoE HAT.

This version has 1 GB of RAM, we also have 2 GB and 4 GB versions.

You can still use all your favorite Raspbian or PIXEL software with this update. You MUST make sure to upgrade your Raspbian operating system install to the latest version so that the firmware can support the new chips! Old SD cards from previous releases will not work without a upgrade!

The dual-band wireless LAN comes with modular compliance certification, that's the metal tin in the corner of the Pi, with the logo stamped on it. This allows the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.

What’s New in Raspberry Pi 4 B?

1. 1GB/2GB/4GB Varients
2. Quad-Core 64-bit Broadcom 2711, Cortex A72  Processor
3. WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
4. LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
5. Operating Power 5V@3A  via USB Type-C Port
6. Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p

Additional Information:

• Delivery Time: 1 Day

The new Raspberry Pi Zero W offers all the benefits of the Pi Zero v1.3, but with one big difference – built-in WiFi and Bluetooth! More specifically, this giant upgrade is the addition of a BCM43143 WiFi chip BUILT-IN to your Raspberry Pi Zero – just like the Pi 3! No more pesky WiFi adapters - this Pi is WiFi ready. There’s also Bluetooth Low Energy (BLE) on board making the Pi an excellent IoT solution (BLE support is still in the works, software-wise). This is the slimmest, most pared down Raspberry Pi to date. It's kind of like the little cousin to the Pi 3 - with just a micro SD card slot, a mini HDMI port, two micro USB ports (one for power, one for USB), and 512MB of RAM. It has a single-core 1 GHz processor chip, similar to the Pi A+ and B+. The best part about all this is that the Pi Zero W keeps the same shape, connectors, and mounting holes as the Pi Zero v1.3. 99% of cases and accessories will still be fully compatible with both the Pi Zero W and v1.3 - though if you have a case with a metal top there might be some WiFi chip difficulties. Please note - even though there's built-in WiFi, the Pi Zero W is quite minimal and requires a few accessories to turn it into a computer! At a minimum we recommend: - A good quality 5V 2A power supply - 4GB+ SD Card with Operating System - Mini HDMI to HDMI Adapter - USB OTG Cable - USB Console cable - 2x20 Male header strip Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W!

Additional Information:

• Delivery Time: 1 Day

A high-quality power USB-C power supply, our recommended way to power Raspberry Pi 4 and Raspberry Pi 400. The adapter comes with 1.5m 18 AWG captive cable with a USB-C output connector. The design of the adapter with a Raspberry LOGO engraved on the top which makes it different from any other adapter available in the market

Features:-

1. Good Quality material
2. 96-230Vac operating input range
3. 50,000 hours MTBF
4. 6-month warranty.
5. Input Current: 0.5A maximum
6. Input Power consumption (no load): 0.075W maximum
7. USB-C connection goes straight into your Raspberry Pi

RP2040 microcontroller chip designed by Raspberry Pi, It has Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz with 264KB of SRAM, and 2MB of onboard Flash memory*It also has 26 GPIO pins and lots of interfacing options including 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels

For a Zero and an ordinary keyboard and mouse, a 1 Amp supply is sufficient. If you will be using power hungry USB peripherals without a powered USB hub then a 2 Amp supply is advisable.*At the heart of the Raspberry Pi Zero W is a 1GHz BCM2835 single-core processor, the same as the B+ and A+, with 512MB RAM*Must have - a microSD card with an operating system and a high-quality 5V power supply to power your board

The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated, permanent clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature even under heavy loads.

The Active Cooler is a one-piece anodized aluminium heatsink with an integrated fan. It has pre-applied thermal pads for heat transfer and mounts to the Raspberry Pi 5 board directly using spring pins. It connects to the same 4-pin JST connector as the case fan.

A radial blower, again selected for low noise and long life, pushes air through an extruded aluminium heatsink. The Active Cooler's cooling performance is slightly higher than that of the Fan Case, making it particularly suitable for overclockers.

Processor: Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz*Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor.*WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz), 1GB RAM Variants.*LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0).*Operating Power 5V@2.5A via USB Type-C Port.

Raspberry Pi Zero 2 W is perfect for a range of smart home applications and other IoT projects.*With a quad-core 64-bit ARM Cortex-A53 processor clocked at 1GHz and 512MB of SDRAM, Zero 2 is up to five times as fast as the original Raspberry Pi Zero.

• The Raspberry Pi 4 is integrated with broadcom 2711, 64-bit quad-core Cortex-A72 processor and 2GB RAM.
• It feeatures true gigabit ethernet port, 2 x USB 3.0 “Super-Speed” ports.
• 802.11b/g/n/ac wireless LAN (2.5 GHz & 5GHz) Bluetooth 5.0 Dual micro-HDMI ports, 4K UHD video H.265 decode (4kp60)H.264 decode (1080p60)
• OpenGL ES 1.1, 2.0, 3.0 graphics PoE capable 5V3A USB-C power supply required
• Completely upgraded, re-engineered, Faster, more powerful, Dual displays 4K output along and is silent, energy-efficient can transfer data up to ten times faster.

Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2040, a brand-new microcontroller chip. The main highlighted thing about RPi Pico is the Lowest cost and Smallest size development board from Raspberry Pi Foundation. On the technical side, it is equipped with an RP2040 Microcontroller chip developed by Raspberry Pi Foundation. RP2040 is their first dual-core ARM Cortex M0+ processor-based latest small-sized, budget-friendly microcontroller. The RP2040 is supported with both C/C++ and micro-python, meaning that if you’re a beginner and want to learn any of these languages, the Raspberry Pico would be the best product option to start with.

• Input: 100-240 VAC
• Output: 5A at 5.1V, 3A at 9V, 2.25A at 12V, 1.8A at 15V
• Connector: USB-C
• Cable: 1.2m, 18awg
• Color: White
• Plug type: Europe (type C)

Powered by RP2040 microcontroller with 2MB of flash memory*On-board single-band 2.4GHz wireless interfaces (802.11n) and Micro USB B port for power and data (and for reprogramming the flash)

This case looks very premium with a round edge and accurate opening to each port of Pi 4.At the side, the case has a GPIO slot from which you can route GPIO and CSI ribbon cable and a cut-out to provide the ease with the micro SD card insertion and removal.

Exactly over the processor chip, there is a Cooling Fan slot and at the opposite side of USB ports, there is a nicely designed ventilation grill to provides ventilation to your pi for continuous operation. This ABS Case for PI 4 is also designed so that you can see the Pi status LEDs clearly and you need not put any effort into fitting the pi inside the case, it fits the pi accurately just like the mobile phone cover.

• OV5647 Sensor
• Adjustable focus
• 75.7 degrees of view angle

• CCD size : 1/4inch
• Aperture (F) : 2.0
• Focal Length : 6MM (adjustable)
• Diagonal : 75.7 degree
• Sensor best resolution : 1080p

Additional Information:

• Delivery Time: 1 Day

5 megapixel native resolution sensor-capable of 2592 x 1944 pixel static images and supports 1080p30, 720p60 and 640x480p60/90 video*Camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system

• RPi Camera, Supports Raspberry Pi model B/B+ A+ RPi 3 2 1
• 5 megapixel OV5647 sensor, Supports up to 2 infrared LED and/or fill flash
• Raspberry Pi Night Vision Camera, supports all revisions of the Pi
• Package Contains:2pcs Infrared LED Light, 1 piece Infrared Night Vision Webcam Camera Board
• The camera is capable of 2592 x 1944 pixel static images, and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording

he RS485 CAN HAT will enable your Pi to communicate with other devices stably in long-distance via RS485/CAN functions.

RS485 is one of the most robust wired serial communication protocol that can support distance up to 1200 meters (4000 ft) while CAN(Controller Area Network) is used in automotive that offer high immunity to noise in cars.

Yes, this board support both RS485 and CAN, bidirectional communication. You can use both the standards/protocols at the same time because each of them uses different peripherals for communication. CAN controller uses SPI while RS485 uses UART from Raspberry Pi.

1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
2. CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
3. RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightning-proof & anti-electrostatic
5. Reserved control pins, allows working with other control boards
6. Comes with development resources and manual (examples in wiringPi/python)

Nylon cable and PVC

1. Mounting screws keep the unit firmly closed
2. Fits all Raspberry Pi 3 B and Raspberry Pi Model 3B+ boards
3. Protects against damages,dust and scratches
4. Snug fit

Additional Information:

• Delivery Time: 1 Day

3010 5V Cooling Fan  with Bolt & Nut is specifically designed for Raspberry Pi and can be mounted on some acrylic cases. The fan is useful for projects where heatsinks just aren't cutting it. Protect your hardware with a low power fan. The greatest feature of this fan is its low power consumption (20mA @ 5VDC). This fan attaches directly to the RPi GPIO and requires no additional power source or relay circuit. This is 3010 5V Cooling Fan for Raspberry Pi with Mounting Bolt & Nut. Use this compact 5V fan to keep your projects cool.

 It is very easy to install and uninstall with easy mounting and Connector to connect onboard. This fan can be directly connected to Raspberry Pi pins 4 and 6.

Specifications:

• Operating voltage: 5V
• Current: 0.2 A
• Brushless DC fan
• Fan dimensions: 30mm x 30mm x 10mm
• Wire length: Around 300mm (Varies with stock)
• Fan weight: 6.2g / 0.22oz

This cover is made of sturdy ABS plastic and has a striking Red and White pattern that is both eye-catching and specifically made for the Pi 5. It provides simple access to all of your Pi's ports while guaranteeing complete protection. This white cover with rubber pads at the bottom for stability and a neatly engraved Raspberry Logo on top protects your Pi 5 configuration while also adding a sophisticated touch. You can be confident that this is a very strong case that does a great job of protecting your Raspberry Pi 5 while also making it look better overall.

• Optimized ventilation: thanks to the integrated variable-speed fan, powered and controlled from a dedicated connector, the Pi 5 stays cool even when subjected to intensive workloads

• Easy port access: precise openings provide easy access to all board ports, allowing you to connect peripherals and extend the functionality of your mini-computer without removing it from the case

• Solid construction: made from ABS plastic, this case offers robust protection against potential damage from light shocks and dust

The cooling fan finds its use as an exhaust fan on the Raspberry pi case as well as 3D printers. It maintains the temperature of the extruder, which results in smooth printing.

This is a Raspberry Pi 4 aluminum case - ultra-thin aluminum alloy metal protective CNC Case that specially designed for Raspberry Pi 4 Model B, which compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Versions, use this Pi 4 case you can have easy access to all ports and slots of your Raspberry Pi 4B. At the bottom of this pi 4 b case there are regular bump design not flat for better heat dissipation. It is a good raspberry pi 4 passive cooling case. It is ultra thin and compatible for 3.5 inch GPIO connection touch LCD. The case use passive cooling to prevent overheating of Raspberry Pi.

• High-quality, two-part ABS construction
• Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
• High quality ABS stong material case
• Fits perfectly to new Raspberry pi 4B model
• Access to all the ports including GPIO

PACKAGE INCLUDED

1 x Raspberry Pi case

Welcome to the newest iteration of this venerable computing marvel, the Raspberry Pi 5 Model 4GB. The Raspberry Pi 5 has a 2.4GHz quad-core Arm Cortex-A76 processor, which is clocked at 64 bits.

This means that it performs 2-3 times better than the Raspberry Pi 4, which was its predecessor.

Not only does it enable twin 4Kp60 display output via HDMI, but it also packs a powerful 800MHz VideoCore VII GPU and a redesigned Raspberry Pi Image Signal Processor to provide it cutting-edge camera capabilities. It offers customers a smooth desktop experience and expands the possibilities for industrial applications.

Look into the improvements that the Raspberry Pi Foundation has made to this latest iteration of the Raspberry Pi 5 Model 4GB pocket computer. Expanding upon the notable hardware upgrades of the Pi 4, the Pi 5 is outfitted with an array of hardware and software advances detailed beneath.

With 2–3× the speed of the previous generation, and featuring silicon designed in‑house for the best possible performance, we’ve redefined the Raspberry Pi experience.

Welcome to the cutting-edge Raspberry Pi 5 Model 8GB, the latest generation of this iconic computing marvel. Packed with a 64-bit quad-core Arm Cortex-A76 processor clocked at 2.4GHz, the Raspberry Pi 5 boasts an impressive 2–3× increase in CPU performance compared to its predecessor, the Raspberry Pi 4.

Not stopping there, it delivers a substantial boost in graphics power thanks to its 800MHz VideoCore VII GPU, supports dual 4Kp60 display output via HDMI, and offers state-of-the-art camera capabilities courtesy of a reimagined Raspberry Pi Image Signal Processor. It promises a seamless desktop experience for consumers and opens new horizons for industrial applications.

Take a moment to explore the upgrades introduced by the Raspberry Pi Foundation in this brand-new generation of the Raspberry Pi 5 Model 8GB pocket computer. Building upon the significant hardware enhancements of the Pi 4, the Pi 5 comes equipped with a host of hardware and software improvements outlined below.

Raspberry Pi  Foundation came up with the next iteration of the Raspberry Pi 4 Model-B single-board computer. The Raspberry Pi 4 Model-B with 8GB RAM is here. It is an awesome and awaited upgrade to Pi 4 Board, isn’t it?

Already the Raspberry Pi 4 Model B is launched with a pretty big upgrade from the Raspberry Pi 3, with the company claiming that the device can provide desktop performance comparable to entry-level x86 PC systems. In addition to this Pi 4 is now more powerful than before with twice the RAM size which is  8GB of LPDDR4 SDRAM

Raspberry Pi 4 is one of the most popular development board offered by the Raspberry Pi foundation. It is a small, inexpensive, single board computer which is great for beginners. You just need to hook it up with the HDMI display and Mouse and Keyboard and you have a PC for yourself. You can use this as a small computer in your small DIY projects and even in commercial applications. To increase the working life of the board and protect the circuit from splashes of water, dust and Shorting due to metal parts falling on the board, you can use this Raspberry Pi Case Enclosure which comes in official Red and White color. It perfectly encloses the Raspberry Pi in it, and it has small opening for connecting power cables, USB cables and HDMI cables so that you don’t have to worry about the wire routing. Even for jumpers, it has space in the side specially for them s it will make your project less cluttered and more organized. You can also check out clear enclosure and other Raspberry Pi accessories. Specification XLPE Plastic for ruggedness For Raspberry Pi 4 Red and White Color Snug Fit Package Content: 1× Raspberry Pi 4 Case Enclosure Official Red & White

For those who want to use their Raspberry Pi 5 without a casing when it is operating at a high sustained load, there is an alternate cooling option available.

The Raspberry Pi Active Cooler provides an alternative cooling solution for users who wish to use their Raspberry Pi 5 under sustained heavy load without a case. It combines a large metal heatsink with a variable-speed blower, again powered and controlled via the fan connector, and attaches to the Raspberry Pi 5 PCB via sprung pins into a pair of mounting holes. Using the same fan connector for power and control, it integrates a sizable metal heatsink and a variable-speed blower. It fastens to the Raspberry Pi 5 PCB using spring pins into two mounting holes. A temperature-controlled fan that can produce airflow of up to 1.4 CFM. Airflow across the memory, processor, and power management integrated circuit.

RP2040 microcontroller with 2MByte Flash Micro-USB B port for power and data (and for reprogramming the Flash) 40 pin 21x51 'DIP' style 1mm thick PCB with 0.1" through-hole pins also with edge castellations