Embeddinator (A Brand Of Engenius Lab)

So as to accomplish high level of customer trust, we are keenly involved in offering Embeddinator IR Sensor Analog and Digital Outputs Module. We offer them at reasonable rates.

• 200g

Additional Information:

• Item Code: B01MU6PJU1

Keeping track of contemporary market development, we are devotedly occupied in providing an extensive series ofEmbeddinator LDR Sensor Module.

• 150g

Additional Information:

• Item Code: B074STPTHJ

LM393 based design. Can detect ambient brightness and light intensity. Adjustable sensitivity (via blue digital potentiometer adjustment). Output Digital – 0V to 5V, Adjustable trigger level from preset. LEDs indicating output and power. Operating Voltage: 3.3V to 5V DC. Operating Current: 15ma.

5 Channel Tracking Sensor Tracking Module Infrared Sensor is based on the infrared reflection sensor, it is often used to make tracking smart cars. The infrared emitting diode of the sensor continuously emits infrared rays

Adjustable Range using preset (Using Potentiometer On board) | Mounting Hole of 2.5mm diameter for Easy Mounting*This can in turn be used for detecting white/black lines (in line follower ROBOT) or bright/dark objects (in object identification ROBOT) or person counter in Visitor Counter, & also useful in various robotics applications.*Operating Voltage : 5V DC Digital Output : logic one (+3.5V DC) logic zero (0V DC)

Operating voltage: 5.0 V Supply current: 100 mA, Output format: 8 Analog and Digital voltages Output voltage range: 0 V to Supplied voltage Optimal sensing distance: 0.125*All Pins are Breakout Pins are available at Male bugs Connector which can be used as main board for developing applications

Adjustable Range using preset (Using Potentiometer On board) | Mounting Hole of 2.5mm diameter for Easy Mounting*Operating Voltage : 5V DC Digital Output : logic one (+3.5V DC) logic zero (0V DC)*It can work in both day & night condition which can adopt by pressing the switch on it.

Get the high-quality Force pressure sensor 0.5-inch diameter at a low price. This is a force sensitive resistor with a round, 0.5″ diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area.

The harder the force, the lower the resistance. When no pressure is been apply to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Two pins extend from the bottom of the sensor with 0.1″ pitch making it bread friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR. Just Connect a resistor to form a voltage divider and measure the voltage at the junction to find the force applied.

These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale.

This sensor can easily interface with Microcontrollers, Arduino Boards, Raspberry Pi, etc. using an Analog to Digital Converter (ADC). so to get the best deal on this pressure sensor at affordable price buy now.

Additional Information:

• Delivery Time: 1 Day

The sensor works best in both Light and dark region.

IR Sensor Module For Raspberry Pi, Arduino, DSP, AVR, PIC, 8051 

EnGeniusLab introduce an Infra-Red Sensor commonly known as IR Sensor is nothing but a combination of IR source and a light detector called photo diode and it work on principal of transmitting light and receiving it and comparing the received amount of light with the help of a comparator LM358. IR Sensors are commonly used in detecting object and obstacles; it can also detect color.

In short we can say IR sensor gives ability to autonomous robots to detect lines or nearby objects to autonomous robots. The Sensor have Digital as well as analog output also it have 3-pin header which make it easy to connect to main board via female to female jumper wire. A mounting hole lets you easily connect one or more of these on any surface.

Additional Information:

• Item Code: B01MQXG5WI
• Delivery Time: 1 Day

ADXL335 is a Breakout board based based on 3 axis ADXL335 IC from Analog Devices. The Accelerometer Module require no external devices and works directly on 5V power supply. This means you can connect it directly to your Arduino without an external regulator or a logic level converter. The output is analog and can be directly interfaced with your microcontroller analog input pins without any external components.

This module can be used to sense motion or tilt in 3 axis with extremely low noise and power consumption at only 320uA. The sensor has a full sensing range of +/-3g. By measuring the echo pulse width, the distance to target can easily be calculated.

It is a hazardous gas detection apparatus for the family, the environment, suitable for ammonia, aromatic compounds, sulphur, benzene vapour, smoke and other gases harmful gas detection, gas-sensitive element test.

Air quality sensor is for detecting a wide range of gases, including NH3, NOx, alcohol, benzene, smoke and CO2. Ideal for use in office or factory with simple drive and monitoring circuit.

Features

• ·         Dual signal output (analog output, and TTL level output)
• ·         TTL output valid signal is low 
• ·         Analog output with increasing concentration, the higher the concentration, the higher the voltage
• ·         Sulphide, benzene, smoke and other harmful gases with high sensitivity
• ·         Has a long life and reliable stability
• ·         Rapid response recovery characteristics

The analog gas sensor - MQ2 is used in gas leakage detecting equipment’s in consumer and industry markets, this sensor is suitable for detecting LPG, i-butane, Propane, Methane , Alcohol, Hydrogen and Smoke. It has a high sensitivity and fast response time and the sensitivity can be adjusted using the potentiometer.

Features

• ·         Power supply needs: 5V
• ·         Interface type: Analog
• ·         Pin Definition: 1-Output 2-GND 3-VCC
• ·         Wide detecting scope
• ·         Fast response and High sensitivity
• ·         Simple drive circuit
• ·         Stable and long life

Additional Information:

• Delivery Time: 1 Day

This alcohol sensor is suitable for detecting alcohol concentration in your breath, just like any other common breathalyzer. It has a high sensitivity and fast response time. This Sensor provides an analog resistive output based on alcohol concentration.

Features

• ·         5V DC circuit
• ·         Requires heater voltage
• ·         Operation Temperature: -10 to 70 degrees C
• ·         Heater consumption: less than 750mW

Additional Information:

• Delivery Time: 1 Day

• Uses the MQ-6 LPG Gas Sensor
• Easy SIP interface
• Compatible with most microcontrollers
• Analog Sensor voltage is available at ANG pin.
• Onboard Status and Power LED
• Onboard Pot for threshold setting
• Onboard Pot for Sensi

Additional Information:

• Delivery Time: 1 Day

Additional Information:

• Delivery Time: 1 Day

Features:

• High Photo Sensitivity
• Fast Response Time
• Sensitivity adjustable

Specification:

• Woriking voltage: 3.3v - 5v
• Detect range: 60 degrees
• Digital/Analog output
• On-board LM393 chip

Additional Information:

• Delivery Time: 1 Day

Linear Hall magnetic module and comes with LED build a simple circuit to produce magnetic field warning lamp*When the linear Hall magnetic module senses detected the key signal. LED lights on, otherwise off.*Small size and high sensitivity. Fast response temperature and good performance. Precision and high reliability

• 4Pin Digital Thermal Thermistor Temperature Sensor Module For Arduino Features: 1 Using the NTC thermistor sensor good sensitivity 2
• The comparator output signal clean waveform is good driving ability than 15mA 3
• Adjust the temperature distribution bit detection threshold 4 Working voltage 3 3V-5V 5 The output format : Digital switching output (0 and 1) 6
• With bolt holes for easy installation 7 A small board PCB size : 3

Heart Rate click carries Maxim’s MAX30100 integrated pulse oximetry and heart-rate sensor. Developers of end-user applications should note that the readings can be negatively impacted by excess motion and changes in temperature. Also, too much pressure can constrict capillary blood flow and therefore diminish the reliability of the data. A programmable INT pin is also available to use.

Specification:

• 3.3V power supply.
• Optical sensor: IR and red LED combined with photodetector
• Measures absorbance of pulsing blood
• I2C interface plus INT pin
• 3.3V power supply

The 41F is a switched Hall-effect IC designed for contactless switching applications. It incorporates various components on a single chip, including an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify the Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, and an open-collector output. This integrated design allows for precise and reliable switching in response to changes in magnetic fields without the need for physical contact, making it suitable for a wide range of applications requiring non-contact switching functionality.

The MQ135 air quality detection module has TTL output valid signal is low level, (output low signal light, which can be accessed microcontroller IO port).*The MQ135 gas detection module uses tin oxide as a the gas sensitive material.*This gas detector sensor module is suitable the detection of harmful gases such as ammonia, aromatics, sulfides, benzene vapor, smoke and other harmful gases.

Infrared Sensor with Control Circuit Board The Sensitivity and Holding Time Can be Adjusted*Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Range: <140°*Detection Distance: 3 to 10m (can be adjusted) Delay Time: 5 to 200s

The E18-D80NK Adjustable Infrared Sensor Switch 3-80cm is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80cm.

The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to assemble and can be widely used in a robot to avoid obstacles, interactive media, industrial assembly lines, and many other occasions.

The switching signal output differs in accordance with the obstacles. It remains high when no obstacles and remains low when there are obstacles. There is a bright light behind the probe to detect the scope of 3cm – 80cm.

Based on GY-BME280 chip Operating Voltage: 5V Interface:I2C up to 3.4MHz ; SPI up to 10 MHz Resolution: Temperature: +-1°C ; Humidity: +-3% ; Pressure: +-1Pa

The Heart Rate Monitor Kit with AD8232 ECG sensor module Kit For Arduino is a cost-effective board use to measure the electrical activity of the heart. This electrical activity can be chart as an ECG or Electrocardiogram and output as an analog reading.

ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op-amp to help obtain a clear signal from the PR and QT Intervals easily. The ECG module AD8232 heart ECG monitoring sensor module is an integrated signal conditioning block for ECG and other bio-potential measurement applications.

The ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino is designed to extract, amplify, and filter small bio-potential signals in the presence of noisy conditions; such as those created by motion or remote electrode placement.

The AD8232 Heart Rate Monitor breaks out nine connections from the IC that you can solder pins, wires, or other connectors too. SDN, LO+, LO-, OUTPUT, 3.3V, GND provide essential pins for operating this monitor with an Arduino or other development board.

Also provided on this board are RA (Right Arm), LA (Left Arm), and RL (Right Leg) pins to attach and use your own custom sensors. Additionally, there is an LED indicator light that will pulsate to the rhythm of a heartbeat. Biomedical Sensor Pads and Sensor Cable are required to use the heart monitor and can be found in the Recommended Products section.

Hall Effect Sensor Module is used to Detect the proximity of a magnet. It is very much Smaller in size. When the magnetic field rises above a threshold level, the open-collector output transistor switches on, which pulls the logic-compatible output low and illuminates the on board LED indicator.

Its fast (The turn-on threshold is 35-450 Gauss, the minimum hysteresis is 20 Gauss, and the operating voltage range is 4.5 - 24 volts.This module uses the Allegro MicroSystems A3144EUA sensor. It has a 3 pin interface, signal, V+ and GND.

Tilt sensor works on a similar principle of mercury switches (but is it not mercury type sensor) and also known as tilt switches, inclinometer, and rolling ball sensors. The sensor measures the tilt, orientation, and inclination in different axes in reference to a plane. It measures the tilt in reference to gravity and enables the easy detection of inclination and orientation. The sensor is very simple to use as has a digital output and an M3 mounting hole to mount with the object. It uses SW-460D/SW-520D sensor to detect tilt.  ​

Applications:

• Vibration detecting
• Analog as well as digital output
• Burglary protection system 
• Object Movement detecting
• Triggering effect reported theft alarm
• Smart car
• Earthquake alarm
• Motorcycle alarm

Additional Information:

• Delivery Time: 1 Day

Microphone Sound Sensor Module (Digital Output) for Raspberry Pi, Arduino, DSP, AVR, PIC, 8051 

Micro-Phone Sensor under made in India which is commonly known as Sound Sensor. The comparator output signal with amplification followed by it and clean waveform is good, driving ability, than 15ma Using the sensitive type photosensitive resistance sensor Working voltage of module 3.3V-5V. Output of module do digital switch output (DO Digital).

The microphone over it, is and highly sensitive toward china, apart from 1K Pot also available for mange the sensitivity of device which keep this device environment adjustable. LED available to check the output with 3 Male berg for interfacing.

Additional Information:

• Item Code: B077CKRCT9
• Delivery Time: 1 Day

TTP223 Touch Sensor IC Single Channel Capacitive Touch Detection Chip-SOT23-6 Package The TTP223 is a touchpad detector IC that offers 1 touch key. Featured by Sharvi Electronics

It can be used for all kinds of weather monitoring and translated into output signals and A0*The output format: digital switch output (0 and 1) and analog ao voltage output.The lm393, use of wide voltage comparator*The sensor uses the high quality fr - 04 double material, large area of 55 x 40 cm, treatment of nickel plating and surface, have fight oxidation, electrical conductivity and life has more superior performance*Operating voltage: Dc3.3-5.5v & Operating current: Less than 20mA

The Heart Rate Monitor Kit with AD8232 ECG sensor module Kit For Arduino is a cost-effective board use to measure the electrical activity of the heart. This electrical activity can be chart as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op-amp to help obtain a clear signal from the PR and QT Intervals easily. The ECG module AD8232 heart ECG monitoring sensor module is an integrated signal conditioning block for ECG and other bio-potential measurement applications. The ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino is designed to extract, amplify, and filter small bio-potential signals in the presence of noisy conditions; such as those created by motion or remote electrode placement. The AD8232 Heart Rate Monitor breaks out nine connections from the IC that you can solder pins, wires, or other connectors too. SDN, LO+, LO-, OUTPUT, 3.3V, GND provide essential pins for operating this monitor with an Arduino or other development board. Also provided on this board are RA (Right Arm), LA (Left Arm), and RL (Right Leg) pins to attach and use your own custom sensors. Additionally, there is an LED indicator light that will pulsate to the rhythm of a heartbeat. Biomedical Sensor Pads and Sensor Cable are required to use the heart monitor and can be found in the Recommended Products section. Features : 1> Designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement. 2> Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. 3> AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. 4> ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op-amp to help obtain a clear signal from the PR and QT Intervals easily. 5> This electrical activity can be charged as an ECG or Electrocardiogram and output as an analog reading. Leads-Off Detection. 6> Shutdown Pin. 7> LED Indicator. 8> Analog Output. 9> 3.5 mm Jack for Biomedical Pad Connection. Note: This product is NOT a industry grade medical device and is not intended to be used as such or as an accessory to such nor diagnose or treat any conditions.