Engineering Solutions Corporation

We are the manufacturers and exporters of Mineral Water Plants.

• Mineral water system and water treatment project to produce Final treated water as per IBWA / BIS Standards.
• Water Filling Machineries for PET bottles from 200 ml to 2000 ml.
• Water Filling Machineries for Jars of 5 Ltr – 20 Ltrs. Pouch Form, Fill & Seal Machine.
• Cup Rinsing, Filling & Foil Sealing Machine.
• PET Bottle Blowing Machines with ancillaries. Injection Moulding Machines

 

We are the manufacturers and exporters of Rapid Flow Two Bed DM Plants Auto. The latest Nishu Enterprise  SuperFlow Two Bed DM Plants Auto comprises a family of automatic twin-bed deionisers, incorporating state-of-the-art counter flow ion exchange technology.
The operational cycle of these rapid-regeneration, packaged units is controlled by volume throughput, which is pre-programmed into the PC according to the type of feed water. The ion exchange resins are never fully exhausted ensuring optimum deionized water production at all times.
Regeneration takes just 30 minutes after a minimum service cycle of two hours minimizing the need for both standby plant and the storage of large volumes of water. As regeneration of the cation and anion beds is simultaneous, the effluent streams are largely self-neutralizing, reducing waste disposal costs and environmental impact.The System is exceptionally compact, and is skid mounted on a corrosion-resistant frame which also accommodates a stainless steel multipurpose pump. In addition to optimizing the performance of the plant during service and regeneration, the pump provides a number of recirculation options to maintain the high quality of the water in the treated water tank.
Special Features

• Instantaneous flow rates up to 20 m3/h
• provide up to 400 m3/day on a feed water of 100 ppm total anion feed.
• Average resistivity of purified water is 0.5 mS/cm, with low running costs.
• High chemical efficiency - high purified water output from low regenerate chemical usage.
• Smaller footprint and higher flow rates than conventional plant.
• 30 minute regeneration time.
• Reduced outage time can often eliminate the need for duplex plant.
• Near neutral effluent reduces disposal costs.
• Stainless steel process pump fitted as standard
• Automatic control by PLC
• Message display provides continuous read out of system status
• Flow display provides information on flow rates, throughput and number of regenerations.
• Audible alarm and 'no flow' alarm circuit
• Can be connected to level sensors in chemical tanks to prevent regeneration when insufficient chemicals are available.
• Minimal installation and commissioning costs.

 

We are the manufacturers and exporters of Membrane Bio Reactor. Backed by profound industry experience, we are offering Membrane Bio Reactor. These are designed with an integrated immersed membrane system combining single sludge aerobic biological treatment process. This involves a unique water treatment process that completely removes bacteria and infectious substances from water and does not leave any by-products. Some of the features of the product are: 

• Controlled and stable operation: HRT and SRT can be separated thereby controlling biological reactions
• Space: provides ease for extension in future increase in wastewater qty, reduces 50% space requirement than conventional system
• Simple operation
• Excellent water quality: clear water with no solids
• High efficiency: in removal of COD, BOD

 

ESCRO ENTERPRISE offers an effectual range of Effluent Treatment Plants for recycling of wastewater to reduce water demand. The comprehensive treatment solution works at various levels and involves various physical, chemical, biological and membrane processes. AGUAPURO also provides effluent treatment solutions for various types of industrial waste water. Customized systems to suit the wide variety of effluents and to maintain efficiency are provided to industries. These systems include physic-chemical treatment, biological treatment, tertiary treatment and membrane separation process to achieve the zero-discharge standards laid by statutory authority. We provide innovative and economical systems for waste from industries like chemicals, drugs, pharmaceutical, refineries, dairy, ready mix plants & textile etc. 

PROCESS OVERVIEW FOR ETP :

• Screening/ Grit chamber: To remove floatable matter and sand, grit, stones in raw effluent.
• Oil & grease trap: To remove floatable oil and grease from raw effluent.
• Primary treatment: Includes chemical treatment (coagulation, flocculation, neutralization) and solid-liquid separation for removal of suspended solids.
• Secondary Treatment: Includes biological treatment for reduction of BOD/COD and solid-liquid separation. Biological treatment can be aerobic or anaerobic depends on quality of raw effluent. Aerobic- ASP (Activated Sludge Process), MBBR/FAB (Moving Bed Bioreactor/ Fluidized Aerated Bioreactor), SAFF (Submerged Aerated Fixed Film Bioreactor), MBR (Membrane Bioreactor) Anaerobic- UASB (Up-flow anaerobic Sludge Blanket Reactor)
• Tertiary treatment: Sand and carbon filtration for removal of suspended solids and organic material. Ultra-filtration and Reverse Osmosis are the advanced technologies to be implemented for zero-discharge system.

 

We are the manufacturers and exporters of Sewage Treatment Plants. We offer Sewage treatment  of various capacity that includes Packaged type or custom made type designs. Sewage treatment or domestic Wastewater treatment is the process of removing contaminants from waste water and household sewage, both runoff (effluents) and domestic. It includes physical, chemical, biological and tertiary processes to remove physical, chemical and biological contaminants. Its objective is to produce a waste stream (or treated effluent) and a solid waste or sludge suitable for discharge or reuse back into the environment.. ESCRO Enterprise offers aerobic system with different Aeration options like Extended Aeration System, Moving Bed Bioreactor (MBBR), Submerged Aerated Fixed Film (SAFF), Membrane Bioreactor (MBR) and anaerobic system with Up-flow Anaerobic Digester.

 

We are one the leading manufacturers and suppliers of Ultraviolet Water Systems, which are used by our valued customers to purify the water. Using these products water can be purified to a crystal clear liquid having 0% impurities as these products use a UV lamp to purify the water which is passed in a quartz or polymer casing. These systems are widely used for the removal of the contaminants and nucleus of microbes such as coliform bacteria. 
Features: 

• Longer service life
• Durability
• Cost effectiveness

 

Being a client-based organization we are engaged in offering our customers with Water Ultrafiltration System services. This water purification technique is very similar to reverse osmosis techniques and is associated with cross filtration flow. In this process of filtration we feed the device with a single tube and output of two streams is generated by it. 
Features: 

• Particulate matter
• Organisms
• Macromolecules
• Bacteria

 

We are one of the most renowned names of the market which are engaged in offering a wide range of Chemical Oxygen Generator to our valued customers. These products are manufactured using best quality materials under the supervision of our quality controllers who always ensure that each product we manufacture deliver excellence. Our products are available at the most affordable market prices. 
Applications : 

• Distilleries
• Food and beverage industries
• Breweries