Ensave Energy Private Limited

Brand	Schneider
Model No	RT6
Rated Supply Voltage	320-460 V AC
Measurement Current	0-5 A
Display Type	4-digit 7 segments LED
Alarm Function	5 last alarms
Measurement Accuracy	+/- 2 %
Height	143 mm
Width	143 mm
Depth	67 mm
Net Weight	0.8 Kg

Along with our range of premium quality electronic products, we are able to manufacture, supply and wholesale top quality array of Power Factor Meter. These power factor meters are highly reliable for providing direct reading and measurement of power factor for various instruments and equipments. Our power factor meters are best instrument for diagnostic and maintenance applications. These power factor meters have LED monitors which provide clear and efficient reading to the users. Our power factor meters are available to our clients at economical prices.

Features:

• Top quality
• Robust
• Provide accurate reading
• Long lasting

Brand	ComAp
Frequency	50 Hz
Voltage	277 V
Phase	Three Phase
Current	5A
Operating Temperature	-20 to 70 Degree Celsius

Benefits:

• Simple paralleling (easy wiring, installation and configuration)
• Remote monitoring helps reduce call-out costs of service engineers
• Optional Internet with control and monitoring over web pages or via Web Supervisor
• Support of wireless Internet
• DC analog gauge outputs – simple connection to standard panel meters
• Optional extension I/O modules
• Optional 1 mains phase current measurement
• Protections – Loss of excitation, Earth fault current protection and others
• Run Hours equalization
• Support of High Voltage and monophase applications
• Direct communication with EFI engines
• History log – easy troubleshooting and warranty claim handling.

Voltage	8 - 36 VDC
Brand	ComAp
Frequency	50 Hz
Model Name	InteliDrive Lite
Display Type	LCD
Display Resolution	128 x 64 Pixel
Operating Temperature regular unit	-20 to + 70 Degree Celsius
Operating Temperature Low Unit	-40 to +70 Degree Celsius
Current	10 A

The New Engine Controller For Pumps And Compressor is a cost effective and sophisticated engine controller, which features outstanding control, monitoring and protection for both mechanical and electronic diesel/gas engines, all in one unit. The extended product family offers a range of engine-specific versions suitable for land-based and marine Tier 4 applications. It can communicate via standard and proprietary CAN J1939 protocols, to a wide range of constant-speed and variable-speed engines, including Caterpillar, Cummins, Detroit Diesel, Deutz, GM, Isuzu, Iveco, John Deere, MAN, MTU, Perkins, Scania, Sisu, Volvo Penta and many others. The controller comes with LiteEdit PC software, enabling the user to easily configure the inputs and outputs to suit individual requirements. Like all ComAp engine controllers, New InteliDrive Lite features a powerful back-lit graphic display, providing vital information in an easy to understand format. A real-time clock, coupled with event and performance history logging, is priceless when it comes to troubleshooting. Remote control and monitoring is possible via analog/GSM/GPRS modem or Internet. The ability for internal values from the New InteliDrive Lite to be displayed on analog gauges gives users the flexibility to create highly-customized instrumentation with ease.

Brand	Schneider Electric
Usage/Application	Industrial
Phase	Single
Type	Automatic
Frequency	50 Hz
Operating Temperature	0-60 Degree Celsius
Storage Temperature	-20-60 Degree Celsius
Voltage	220 V
Power Source	Electric

The Varlogic N power factor controller permanently measure the reactive power of the installation and control connection and disconnection of capacitor steps in order to obtain the required power factor.

Brand	Honeywell
Model No.	UDC 3300
Voltage	90 - 240 V AC
Frequency	50 Hz
Input Accuracy	+- 0.20%
Sampling Rate	6 Times / Sec
Temperature Stability	+- 0.01% of Full Scale span / C change-typical
Ambient Temperature	-40 to 66 Degree Celsius
Relative Humidity	10 to 55 %
Weight	1.3 kg
Power Consumption	18 VA
Power Inrush Current	10 A

Overview :

• The UDC 3300 Universal Digital Controller pack new powerful feature in the popular 1/4 DIN sizewhile retaining all the simplicity, flexibility, accuracy, and industry leading MMI of the UDC 3000.

• Unmatched new application power includes: two universal analog inputs, two loops of control, two Math equations, two characterizers, and a totalizer. When these are combined with the new Accutune II tuning with fuzzy logic overshoot suppression, the result is price/performance leadership.

• Application flexibility is assured by the universal analog inputs, universal AC power supply, two digital inputs, RS422/485 ASCII or Modbus RTU communication protocols, simple configuration plus total field upgrade capability for any optional feature.

• A new and innovative Maintenance & Diagnostic tool available with ALM RSP Controller has a sealed faceplate suitable for hosedown applications Expanded UDC3300 controllers is HealthWatch, a low-cost software program that puts maintenance and diagnostic data at your fingertips so you can monitor vital performance activities to improve your process, predict equipment failure, and minimize downtime.

• The UDC 3300 is totally compatible with existing UDC 3000 applications and installations. It even uses the same case.

Usage/Application	Industrial
Brand	ComAp
Country of Origin	Made in India
Voltage	8-36 V DC
Operating temperature regular unit	-20 to +70 Degree Celsius
Display Type	LCD
IP Rating	IP 65
Frequency	50 Hz
Current	10 A
Power Source	Electric
Humidity	95%

Description :

• InteliDrive Fire Pump Controller (FPC) modular engine controller is designed for diesel driven fire pumps applications based on the NFPA 20 standard. The controller utilises the hardware of a standard ComAp industrial engine controller, with a proven track record for flexible and reliable control gas or diesel applications.

• The ComAp engine controller has an LCD screen for system information and fault indication, control buttons for switching between automatic and manual operation. Manual operation allows the diesel engine to be started using local buttons on the fascia of the controller or by external buttons on the control panel. Automatic mode of operation provides starting by a remote digital input switch or system pressure switch. The control system incorporates two battery starter systems; the controller monitors the voltage on both battery systems, automatically switching between battery sets on a cyclic basis or low battery voltage condition. The controller has configurable digital inputs and outputs which are set up to suit the installation requirements. Setpoint parameters for engine control and system sequencing are adjustable from the fascia of the controller (password protected).

Benefits

• Integrated solution – less
• wiring and components
• Available Remote Display panel –
• economical solution for remote control
• Analog gauge (VDO, Datcon, etc.)
• outputs – operator friendly
• History log – easy troubleshooting
• Pressure regulation loop
• and Load limitation
• Smooth engine speed control
• Less engineering and programming
• Perfect price/performance ratio

Features

• Engine control, monitoring and protection 
• Support of engines equipped with Electronic Control Unit (ECU) – J1939 or Cummins Modbus interface
• 7 configurable binary inputs and outputs
• 3 configurable analog inputs + 2 analog inputs of battery voltage measurement
• VDO type analog gauges outputs – 8 configurable channels
• Selectable protections alarm/shutdown
• Setpoints adjustable via keyboard or PC
• 1 level of password protection
• USB, RS485 or RS232/Modem/Modbus communication
• Real time clock and event history log
• Engine speed control by 3 predefined binary inputs, Speed Up/Down binary inputs or one analog input
• Analog oil pressure, water temperature, fuel level, battery voltage, engine speed (pick-up)
• Automatic or manual start/stop of the engine
• Automatic starting sequence based on two batteries according to NFPA 20 standard
• Push buttons for simple control, lamp test
• Graphic back-lit LCD display 128 × 64 pixels
• 6 LED indicators (Alarm, Warning, Not Ready, Running, Battery A, Battery B) 
• Front panel sealed to IP65
• Power supply 8–36 VDC
• InteliDrive FPC controller meets several standards (EN, UL, CSA, NFPA)

Brand	ComAp
Voltage	220 V
Model Name/Number	Intelivision 8
Frequency	50 Hz
Current	10 A
Country of Origin	Made in India
Operating temperature:	-20 to + 70 Degree Celsius
Protection Rate	IP 65
Resolution	800 x 600 pixels
Operating System	Windows CE
Power Source	Electric

Intelivision 8 Controller Colour Display Unit designed as a simple, easy-to-use Plug and Play solution and delivers high visibility of all engine data, monitoring information and trend history in a bright, colorful and forward looking design. It can be used for either InteliGenNT, InteliSysNT, InteliMainsNT, InteliDrive DCU and InteliDrive Mobile. InteliVision 8 comes with the large high-resolution colour TFT display, which helps visibility and definition of onscreen information. The control interface has user-friendly, intuitive active buttons – giving users access to more information in less time. InteliVision 8 boasts the unique TRENDS monitoring as a standard feature, helping you evaluate past events easily on one screen. It offers a site data storage using a USB stick and permits adding external pictures for customization of screens. InteliVision 8 includes ComAp’s standard communication interface using RS232/485 and CAN bus communication. Designed to be mounted in both monitoring and engine room, InteliVision 8 gives complete access to all control functions when connected to control unit.

Benefits

• Large, colour screen with high-resolution
• Plug And Play operation (auto configuration
• based on controller application)
• Simpler, faster and more intuitive control
• More information in less time
• Trends monitoring screen
• USB flash disk as file Storage (export trends,
• history and archive to USB flash disk)
• Quick AUTO login with USB stick
• User’s Pictures import to measurement screen
• Easy Drag & Drop screen Configuration by Graphical 
• Configurable  soft keys buttons
• Fast jump to any Measurement or Setpoints screens
• Binary signal activation – toggle button/pulse generator
• Associating of genset commands
• ADAPTIVE and COLOR alarm list displaying
• Support of Tier 4 icons
• Direct connection to the controller (converters are not needed)

Features

• 8” colour TFT display with resolution 800×600 pixels
• Customized initial screen logo and the
• content of a controller help
• Same language support as InteliGenNT, InteliSysNT,
• InteliMainsNT, InteliDrive DCU and InteliDrive Mobile
• Allows full monitoring of ONE controller (in case of more
• controllers on CAN it is possible to switch over among
• controllers monitoring by change of CAN address)
• The same dimensions as IS-Display (possible as
• a replacement for IG-Display LT GC, IS-Display or I-RD-CAN)
• Connection via of RS232/485 and CAN bus
• Possibility to mount InteliGenNT BaseBox, InteliGenNTC
• BaseBox, InteliSysNTC BaseBox or InteliSysNT BaseBox
• to the rear side of InteliVision 8
• Windows CE operating system
• Operating temperature: –20 to + 70°C
• Face is sealed to IP65
• EMC, climatic and mechanical tests
• CE, UL certification

Brand	ComAp
Current	5A
Phase	3 Phase
Voltage	8-36 V DC
Usage/Application	Industrial
Frequency	50 Hz
Ip Rating	IP 65
Country of Origin	Made in India
Model Name	InteliDrive EM
Operating temperature Regular unit	-20 to +70 Degree Celsius
Operating low temperature unit	-40 to +70 Degree Celsius

Description :

Intelidrive EM Electric Motor Controller  is an integrated control solution for Single or Three phase AC electric motors. It allows operation of the motor either manually, remotely or automatically. The InteliDrive EM controller has many motor protections as standard including both overload and overcurrent protection. Many different applications which are driven by an electric motor can be controlled and protected by the controller. Optional remote control allows complete monitoring of the application. Like all ComAp products, ease of use is an important design philosophy, so InteliDrive EM features a powerful graphic display providing user-friendly information in an easy to understand format. Instrumentation of internal values on analog gauges makes it simple to use, even for untrained personnel. Remote control and monitoring is possible via analog/GSM/GPRS modem or Internet. The InteliDrive EM controller is provided with LiteEdit PC software enabling the user to freely configure the inputs and outputs to suit individual application requirements. The controller also features a built-in event and performance log with a Real time clock which makes troubleshooting even simpler and helps safeguard suppliers‘ warranty.


Benefits

• GPRS Internet or SMS monitoring.
• Remote monitoring helps reduce
• call-out costs of service engineers.
• GPRS Internet or SMS control. Wireless
• remote control allows realizing
• completely new functions of the motor.
• Active SMS or E-mails in
• the event of an alarm
• Detailed History Log – easy
• troubleshooting and warranty
• claim handling
• ON/OFF regulation of process value
• based on binary or analog signal
• Less engineering and programming
• for wide applications
• Integrated solution – less
• wiring and components

Features:

• Electric Motor control, monitoring and protection
• All common ways to start asynchronous motor:
• direct, Y-D, SoftStarter starting,
• Optimized Y-D starting (v 1.1 and higher)
• Selectable protections alarm/shutdown
• Setpoints adjustable via keyboard or PC
• 3 level of password protection
• USB, RS485 or RS232, GSM/GPRS, ModBus communication
• Real time clock and event history log
• Automatic or manual start/stop of the motor
• Speed reversal (v 1.1 and higher)
• Cascade control - start of several motors
• by one controller (v 1.1 and higher)
• Incorporated PID regulator (v 1.1 and higher)
• Push buttons for simple control, lamp test
• Graphic back-lit LCD display 128 × 64 pixels
• 7 configurable binary inputs and outputs
• 3 configurable analog inputs
• 2 LED indicators
• Front panel sealed to IP65
• Power supply 8–36 VDC