X

Enthu Technology Solutions India Private Limited

Peelamedu, Coimbatore, Tamil Nadu

| GST  33AADCE9083H1ZJ

| TrustSEAL Verified

|

★★★★★
★★★★★
View Mobile Number 80% Response Rate

Our Product Range

+View All

IoT

1. IoT Trainer Kit
2. LoRa IoT Development Kit
3. LoRa Gateway
4. LoRa GPS Tracker
5. IoT Laboratory Solutions

LoRaWAN Multi Channel Outdoor Gateway With 3G/4G (DLOS8 EC25)
  • LoRaWAN Multi Channel Outdoor Gateway With 3G/4G (DLOS8 EC25)
  • LoRaWAN Multi Channel Outdoor Gateway With 3G/4G (DLOS8 EC25)
  • LoRaWAN Multi Channel Outdoor Gateway With 3G/4G (DLOS8 EC25)
  • LoRaWAN Multi Channel Outdoor Gateway With 3G/4G (DLOS8 EC25)
Interested in this product?
Get Best Quote

LoRaWAN Multi Channel Outdoor Gateway With 3G/4G (DLOS8 EC25)

Rs 37,800 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Number Of Ports10
Usage/ApplicationIOT
Network Type3G/4G, Wifi, Ethernet
Model Name/NumberDLOS8
BrandDragino
Number Of Ports/Pins10
Compatible BrandLoRaWAN
ColorWhite
Power Supply12V DC (or) PoE

The DLOS8 is a Multichannel LoRaWAN Outdoor Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.

The DLOS8 uses semtech packet forwarder and fully compatible with LoRaWAN protocol. It includes a SX1301 LoRaWAN concentrator, which provide 10 programmable parallel demodulation paths.

DLOS8 has pre-configured standard LoRaWAN frequency bands to use for different countries. User can also customized the frequency bands to use in their own LoRaWAN network.

DLOS8 can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
Features:
  • Open Source OpenWrt system
  • Managed by Web GUI, SSH via LAN or WiFi
  • Emulates 49x LoRa demodulators
  • Outdoor LoRaWAN Gateway
  • 10 programmable parallel demodulation paths
  • LoRaWAN packet filtering
  • Far seeing LED indicator
  • Built-in GPS module for location & timing
  • External fiber glass antenna
  • 802.3af PoE
  • IP65
  • Lighting Protection
  • Power Consumption:12v 300 ~500mA
Applications:
  • Smart Buildings & Home Automation
  • Logistics and Supply Chain Management
  • Smart Metering
  • Smart Agriculture
  • Smart Cities
  • Smart Factory
LoRa Spec:
  • 1 x SX1308 + 2 x 1257 LoRa Tranceiver 
General Specification:
  • 10M/100M RJ45 Ports x 1
  • 1 x 2.4G WiFi (802.11 bgn)
  • 1 x USB host port
  • Power by 12v DC or PoE


Additional Information:

  • Delivery Time: 3-4 days

View Complete Details

Yes, I am interested!

The Things Indoor Gateway
Interested in this product?
Get Best Quote

The Things Indoor Gateway

Rs 7,200 / PieceGet Latest Price

Usage/ApplicationIOT
Network TypeLoRaWAN
Model Name/NumberTTIG
BrandThe Things Network
Number Of Ports/Pins8
ColorWhite
Power Supply5V via USB C Cable

The Things Indoor Gateway

The Things Indoor Gateway(TTIG) is designed to be a fully compliant, ultra-low-cost LoRaWAN gateway, with WiFi as the backhaul. The gateway comes with a wall plug and can be powered over USB-C on 900mA, making the gateway even suitable for applications that require dynamic coverage.

 

Salient Features:

  • An 8 channel LoRaWAN indoor gateway.
  • One of the first gateways to support the state-of-the-art BasicStation Protocol.
  • Supports LBT.
  • Simple setup steps taking lesser than 5 mins.
  • Can connect to any networking backend of choice.
  • Setup and Connectivity over WiFi.
  • Can be powered up via a USB-C cable or via an elegant connector to the power outlet.
  • Built-in omnidirectional antenna for indoor use.
  • IN865
  • Security via a range of modes.

View Complete Details

Yes, I am interested!

The Things Outdoor Gateway
Interested in this product?
Get Best Quote

The Things Outdoor Gateway

Rs 52,000 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Number Of Ports8
Usage/ApplicationIOT
Network TypeLoRaWAN
Model Name/NumberTTOG
BrandThe Things Network
Number Of Ports/Pins8
ColorGrey
Power Supply55VDC/0.6A via included PoE adapter

The Things Outdoor Gateway

The Things Outdoor Gateway (TTOG) is an industrial, outdoor and fully compliant gateway at a very low cost.

 

Salient Features:

  • LoRaWAN 1.0.2 compliant
  • Supports eight channels for EU868 and US915 bands
  • 3G/4G backhaul via built in modem
  • Supports LBT (Listen Before Talk)
  • IN865
  • IP67 waterproof enclosure
  • Dimensions: 230 x 200 x 68mm
  • Weight: 2.05kg
  • Power voltage: 55VDC/0.6A via included PoE adapter

View Complete Details

Yes, I am interested!

LoRa Gateway Outdoor
  • LoRa Gateway Outdoor
  • LoRa Gateway Outdoor
  • LoRa Gateway Outdoor
Interested in this product?
Get Best Quote

LoRa Gateway Outdoor

Rs 18,360 / PieceGet Latest Price

Product Brochure

Model NumberOLG-01
ColorWhite
Power Supply12V DC
Operating Temperature-40 deg C
Sim InterfaceNo
Ethernet PortsYes
Memory512MB
LTE Antenna3dBi
Dimensions296x220x58 mm

The OLG01 is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.



OLG01 has WiFi interface, Ethernet port, and USB host interface. These Interfaces provide flexible methods for users to connect their sensor networks to the Internet.

OLG01 runs Open Source OpenWrt system, the user is free to modify the source file or compile the system to support their customized applications.

Features

 

Open Source OpenWrt system

Low power consumption

Firmware upgrade via Web

Software upgradable via the network

Auto-Provisioning

Built-in web server

Managed by Web GUI, SSH via LAN or WiFi

Support WiFi AP, Client or Ad-Hoc(Mesh) mode

Internet connection via LAN, WiFi.

Failsafe design provides a robustly system

Arduino IDE compatible. Easy to program. 

LoRa band available at 865 - 867 Mhz 

Max range in LoRa : 5 ~ 10km

SMA connector for external LoRa antenna

12dBi WiFi directional antenna

Passive PoE Interface

Weatherproof enclosure

 

Applications

Wireless Alarm and Security Systems

Home and Building Automation

Automated Meter Reading

Industrial Monitoring and Control

Long range Irrigation Systems

GPS tracker, etc

 

Specifications

Linux Side

Processor: 400MHz, 24K MIPS

Flash: 16MB ; RAM: 64MB

MCU/LoRa Side

 

MCU: ATMega328P

Flash:32KB, RAM:2KB

LoRa Chip: SX2176/78

Interfaces

10M/100M RJ45 Ports x 2, Support Passive PoE

WiFi : 802.11 b/g/n

LoRa Wireless

Power Input: 12V DC

USB 2.0 host connector x 1

USB 2.0 host internal interface x 1



Additional Information:

  • Item Code: OLG-01

View Complete Details

Yes, I am interested!

LoRa Outdoor Gateway
  • LoRa Outdoor Gateway
  • LoRa Outdoor Gateway
Interested in this product?
Get Best Quote

LoRa Outdoor Gateway

Rs 19,620 / PieceGet Latest Price

Product Brochure

Compatible BrandLoRa
Network Type3G, 4G
Model NumberOLG02
ColorWhite
Power Supply12V DC
Antenna12 dBi
Sim InterfaceNo
Ethernet PortsYes
Max range in LoRa5-10 Km

The OLG02 is an open source dual channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi & Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.

OLG02 has WiFi interface, Ethernet port, and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to the Internet.

OLG02 runs Open Source OpenWrt system, the user is free to modify the source file or compile the system to support their customized applications.

Features

 

Open Source OpenWrt system

Low power consumption

Firmware upgrade via Web

Software upgradable via a network

Flexible protocol to connect to IoT servers

Auto-Provisioning

Built-in web server

Managed by Web GUI, SSH via LAN or WiFi

Internet connection via LAN & WiFi

2 x SX1276/SX1278 LoRa modules

 

Full-duplex LoRa Transceiver

Two receive channels, and one transmit channel

Limited support in LoRaWAN/ Support Private LoRa protocol

Support upto 300 nodes

LoRa band available at 865-867 Mhz

Max range in LoRa : 5 ~ 10km. Density Area:>500m

 

Applications

 

Wireless Alarm and Security Systems

Home and Building Automation

Automated Meter Reading

Industrial Monitoring and Control

Long range Irrigation Systems

LoRaWAN Repeater

 

Specifications

Linux Side:

 

Processor: 400MHz, 24K MIPS

Flash: 16MB; RAM: 64MB

 

MCU/LoRa Side:

 

MCU: ATMega328P

Flash:32KB, RAM:2KB

LoRa Chip: SX2176/78


Interfaces:

 

10M/100M RJ45 Ports x 2

WiFi : 802.11 b/g/n

LoRa Wireless

Power Input: 12V DC

USB 2.0 host connector x 1

2 x LoRa Interfaces

View Complete Details

Yes, I am interested!

LoRaWAN Indoor Gateway (Multi Channel)
  • LoRaWAN Indoor Gateway (Multi Channel)
  • LoRaWAN Indoor Gateway (Multi Channel)
Interested in this product?
Get Best Quote

LoRaWAN Indoor Gateway (Multi Channel)

Rs 22,500 / PieceGet Latest Price

Product Brochure Watch Video

Compatible BrandDragino
Model NumberLG308
ColorWhite
Power Supply12V DC
Sim Interface3G/4G
Ethernet PortsYes
Flash16 MB
RAM64 MB
MCUATMega328P
Processor400 MHz
LoRa ChipSX2176/78

The LG308 is an open source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via Wi-Fi, Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.


The LG308 is fully compatible with LoRaWAN protocol. It includes a SX1308 LoRa concentrator and a SX1276 LoRa transceiver, the sx1308 provides 10 programmable parallel demodulation paths and the SX1276 acts as TX channel so the SX1308 won’t be block during TX. This combination provides higher capacity compare with a standalone SX1308 concentrator solution.

The LG308 has a built-in GPS module, the GPS module is connected to the SX1308 chip directly for TDoA LoRaWAN localization solution for ultra-low power or indoor solution.

Features:

  • Open Source OpenWrt system
  • Managed by Web GUI, SSH via LAN or Wi-Fi
  • Emulates 49x LoRa demodulators
  • LoRaWAN Gateway
  • SX1276 base separate TX path
  • 10 programmable parallel demodulation paths

Applications:

  • Smart Buildings & Home Automation
  • Logistics and Supply Chain Management
  • Smart Metering
  • Smart Agriculture
  • Smart Cities
  • Smart Factory

 

Specifications:

LoRa Spec:

  • 1 x SX1308 + 2 x 1257 LoRa Transceiver 
  • 1 x SX1276 LoRa Transceiver
  • 1 x GPS module for LoRa localization

General Specification:

  • 10M/100M RJ45 Ports x 2
  • 1 x 2.4G Wi-Fi (802.11 bgn)
  • 1 x USB host port
  • 1 x Mini-PCIe Interface
  • Power Input: 12v, 1A


Additional Information:

  • Item Code: LG308

View Complete Details

Yes, I am interested!

LoRaWAN Industrial Gateway
  • LoRaWAN Industrial Gateway
  • LoRaWAN Industrial Gateway
Interested in this product?
Get Best Quote

LoRaWAN Industrial Gateway

Rs 46,080 / UnitGet Latest Price

Minimum Order Quantity: 1 Unit

Product Brochure

- Up to 8 Simultaneous channels - Compliance to LoRaWAN Class A and Class C - Backhaul Connectivity (Eth/3G/4G) - Build-in DI/DO, Serial Port and GPS - Long Range over 10 km Radius - Optional Embedded Network Server - Integrated with Multiple Network Servers - IP67 Waterproof Casing (Outdoor Version)

View Complete Details

Yes, I am interested!

LoRa IoT Development Kit
  • LoRa IoT Development Kit
  • LoRa IoT Development Kit
Interested in this product?
Get Best Quote

LoRa IoT Development Kit

Rs 15,480 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Product Brochure

Model NumberLoRa IoT Development Kit
Usage/ApplicationProduct Development
Requirement DetailsLong range Wireless Communication
ColorWhite
Weight1kg
BrandDragino
Power Supply5V-12V
Frequency50 Hz
Packaging TypeBox
TypeIoT Development Kit

LoRa IoT Kit is designed to facilitate beginners and developers to quickly learn LoRa and IoT technology. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere. A number of telecom operators are currently rolling out networks, but because LoRa operates in the open spectrum you can also set up your own network. The LoRa IoT kit will show how to build LoRa network, and how to use the network to send data from a LoRa sensor node to the cloud server. When used as a private LoRa network, the LoRa gateway will connect your other LoRa nodes up to 5km however expect up to 10km range (when in line of sight) when connecting your LoRa node to a LoRa gateway!

Additional Information:

  • Item Code: LoRa_IoT_Development_Kit
  • Delivery Time: Immediate

View Complete Details

Yes, I am interested!

IoT Trainer Kit
Interested in this product?
Get Best Quote

IoT Trainer Kit

Rs 22,000 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Usage/ApplicationLaboratory
UsageLaboratory
BrandETS
Power Supply6x5V
Output WaveformHDMI
Item Weight15.0 grams
Channel Relay3x3 mm

ETS-IoT Kit – A Platform to Experiment Internet of Things

 

IoT trainer kit is an all-in-one prototyping platform for sensor-based IoT projects. It’s packed with state of the art sensor technology and ready-to-use software applications, capable of fulfilling all your IoT application needs. It contains inbuilt Raspberry Pi3 with all in one sensor platform to enable infinite IoT application prototype possibilities. 

 It also has a GPS module to add localization capability for the IoT projects. In addition to that, it consists of Pushbuttons, OLED display, and status LEDs to demonstrate or visualize IoT applications. 

Other highlights 

Technical Specifications:

 

  • Quad-core ARM Cortex-A53 (Armv8-A architecture)
  • Up to 1.2GHz Clock speed
  • Broadcom Video Core IV
  • 1GB LPDDR2 (900 MHz)
  • MicroSDHC slot for onboard storage

 

Communication Interfaces

  • 10/100 Ethernet
  •  2.4GHz 802.11n wireless
  •  Bluetooth Classic
  •  Bluetooth Low Energy


On board Sensors

  • Accelerometer
  • Gyroscope
  • Temperature
  • Humidity
  • Pressure


User interfaces

  • 3x3 channel relay
  • 3 RGB LED
  • 2 Push button
  • Buzzer
  • OLED display


Ports

  • UART
  • SPI
  • I2C
  • 8 Analog I/O
  • 31 GPIOs to interface external sensors
  • 4 USB 2.0 port
  • 3.5mm analog audio-video jack
  • 6x5V Power supply
  • 5x3.3V Power supply
  • HDMI output
  • Camera Serial Interface(CSI)
  • Display Serial Interface(DSI)


External Sensors

  • PIR sensor
  • Ultrasonic sensor
  • GAS sensor
  • Air Quality Sensor
  • IR sensor
  • Fire sensor
  • Light sensor
  • Flex sensor
  • Heartbeat sensor
  • vibration
  • servo motor
  • Soil Moisture sensor
  • Rain sensor

 

With the above specifications, a user could do countless IoT prototype and example applications. We at Enthu technology supports technically if required. This kit is suitable for anyone who wants to learn/Research/Prototype/Teach Internet of Things applications or projects.

It works with open source operating systems like Linux distributions/ Android Things or even with Windows 10 IoT core and it possible to connect this kit with most of the cloud domains easily. It is like a mini computer designed to explore the Internet of Things and core embedded systems applications.

View Complete Details

Yes, I am interested!

LoRa Indoor Gateway (Single Channel)
  • LoRa Indoor Gateway (Single Channel)
  • LoRa Indoor Gateway (Single Channel)
Interested in this product?
Get Best Quote

LoRa Indoor Gateway (Single Channel)

Rs 7,380 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Product Brochure Watch Video

Model NumberLG01-N
Ethernet InterfaceYes
ColorWhite
Power Supply12V DC
Sim InterfaceNo
Ethernet PortsYes
Processor400 MHz
Flash16 MB
RAM64 MB
WiFi802.11 b/g/n

LG01-N is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via Wi-Fi, Ethernet, 3G or 4G cellular.

LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.

LG01-N has rich internet connection method such as Wi-Fi interface, Ethernet port and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to Internet.

LG01-N can support the LoRaWAN protocol in single frequency and customized LoRa transmit protocol. Different from LG01-P/LG01-S, LG01-N use the Linux to directly control the sx1276/sx1278 LoRa module which increase the communication efficiency and simplify the software design.

LG01-N can be used to provide a low cost IoT wireless solution to support 50~300 sensor nodes.

Except LoRaWAN mode, LG01-N can support multiply working mode such as: MQTT mode, TCP/IP Client mode to fit different requirement for IoT connection.

LG01-N base on sx1276 solution which provide a low cost for your IoT network connection. Compare to the cost with normal SX1301 LoRaWAN solution. The LG01-N is only of its 1/4 or less cost. This make the LG01-N very suitable to set up small scale LoRa network.

 

 

Features:

· Open Source OpenWrt system

· Low power consumption

· Firmware upgrade via Web

· Software upgradable via network

· Flexible protocol to connect to IoT servers

· Auto-Provisioning

· Built-in web server

· Managed by Web GUI, SSH via LAN or Wi-Fi

· Internet connection via LAN, Wi-Fi, 3G or 4G

· Failsafe design provides robustly system

· 1 x SX1276/SX1278 LoRa module

· Limited support in LoRaWAN/ Support Private LoRa protocol

· Support up to 300 nodes

· LoRa band available at 433/868/915/920 MHz

· Max range in LoRa: 5~10 km. Density Area :>500m

 

Applications:

· Wireless Alarm and Security Systems

· Home and Building Automation

· Automated Meter Reading

· Industrial Monitoring and Control

· Long range Irrigation Systems

· GPS tracker,etc

· LoRaWAN Repeater

 

Specifications:

· Linux Side:

· Processor: 400MHz, 24K MIPS

· Flash: 16MB ; RAM: 64MB

 

Interfaces:

· 10M/100M RJ45 Ports x 2

· Wi-Fi : 802.11 b/g/n

· LoRa Wireless

· Power Input: 12V DC

· USB 2.0 host connector x 1

· USB 2.0 host internal interface x 1

· 1 x LoRa Interface



Additional Information:

  • Item Code: LG01-N

View Complete Details

Yes, I am interested!

LoRa Outdoor Gateway (Dual Channel & 3G/4G)
Interested in this product?
Get Best Quote

LoRa Outdoor Gateway (Dual Channel & 3G/4G)

Rs 19,620 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Product Brochure

Usage/ApplicationOutdoor
Model NumberOLG02-EC- 25
ColorWhite
Ethernet InterfaceYes
Power Supply12V DC
Sim Interface3g/4G
Ethernet PortsYes
Frequency865-867 MHz

The OLG02-EC25-E is an open source dual channel LoRa Gateway with GPRS. It lets you bridge LoRa wireless network to an IP network via WiFi & Ethernet,3G or 4G Cellular.The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.                            

OLG02 has WiFi interface, Ethernet port, and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to the Internet.

OLG02 runs Open Source OpenWrt system, the user is free to modify the source file or compile the system to support their customized applications.

Features

 

Open Source OpenWrt system

Low power consumption

Firmware upgrade via Web

Software upgradable via a network

Flexible protocol to connect to IoT servers

Auto-Provisioning

Built-in web server

Managed by Web GUI, SSH via LAN or WiFi

Internet connection via LAN & WiFi, 3G or 4G

Failsafe design provides a robustly system

2 x SX1276/SX1278 LoRa modules

Full-duplex LoRa Transceiver

Two receive channels, and one transmit channel

Limited support in LoRaWAN/ Support
Private LoRa protocol

Support upto 300 nodes

LoRa band available at 865-867 Mhz

Max range in LoRa : 5 ~ 10km. Density Area:>500m

 

Applications

 

Wireless Alarm and Security Systems

Home and Building Automation

Automated Meter Reading

Industrial Monitoring and Control

Long range Irrigation Systems

LoRaWAN Repeater

 

Specifications

Linux Side:

 

Processor: 400MHz, 24K MIPS

Flash: 16MB; RAM: 64MB

 

MCU/LoRa Side:

 

MCU: ATMega328P

Flash:32KB, RAM:2KB

LoRa Chip: SX2176/78


Cellular 4G LTE (optional):

Quectel EC25-E LTE model (Click the link and choose the right model  when order)

Micro SIM Slot

Internal 4G Antenna + External 4G Sticker Antenna

 

Up to 100Mbps downlink and 50Mbps uplink data rates

Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage

 

MIMO technology meets demands for data rate and link reliability in modem wireless communication systems   

 

Interfaces:

 

10M/100M RJ45 Ports x 2

WiFi : 802.11 b/g/n

LoRa Wireless

Power Input: 12V DC

USB 2.0 host connector x 1

2 x LoRa Interfaces



Additional Information:

  • Item Code: OLG02-EC-25

View Complete Details

Yes, I am interested!

LoRa GPS Shield for Arduino
Interested in this product?
Get Best Quote

LoRa GPS Shield for Arduino

Rs 3,960 / PieceGet Latest Price

BrandDragino
Usage/ApplicationLoRa Application
Model NumberQ1-AO440
Voltage2.7-2.9 V
Update Rate1 Hz
Bullet Proof Front End-12.5 dBm

The LoRa GPS Shield is a expension board of LoRa™/GPS for use with the Arduino. This product is intended for those interested in developing LoRa™/GPS solutions.

 

In the LoRa part, the LoRa GPS Shield is based on the SX1276/SX1278 transceiver.The transceivers of the Shield feature the LoRa™ long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption. LoRa™ also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range,interference immunity and energy consumption.

 

 

View Complete Details

Yes, I am interested!

LoRaST IoT Module
  • LoRaST IoT Module
  • LoRaST IoT Module
Interested in this product?
Get Best Quote

LoRaST IoT Module

Rs 2,520 / PieceGet Latest Price

BrandDragino
Model NumberLoRaST
ColorWhite
Frequency32 MHz
Operating Voltage3.3V
Supply Voltage1.8 V - 3.6 V
Weight4g
Dimension22 x 42 x 3.6 mm
Operating Tempature40 - 85 deg C

Dragion LoRaST IoT module featuring LoRa® technology is a small wireless transceiver module offers a very compelling mix of long range, low power consumption and secure data transmission.It is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.

LoRaST's wireless part is based on SX1276/SX1278 which allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

LoRaST's mcu part use STM32l0x chip from ST, STML0x is the ultra-low-power STM32L072xx microcontrollers incorporate the connectivity power of the universal serial bus (USB 2.0 crystal-less) with the high-performance ARM® Cortex®-M0+ 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (192 Kbytes of Flash program memory, 6 Kbytes of data EEPa0 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals via industrial standard M.2 (NGFF) pin interface.

Dragion LoRaST featuring LoRa® technology is an open source product, it is based on the STM32Cube HAL drivers, with customer application examples, user can program the IoT module via USART1 , USART2 or STLINK. The factory firmware supports LoRaWAN 1.0.2 specification and user can use AT Command to set up it and use for their project directly. User can re-compile the firmware to support different LoRaWAN Frequency, includes: EU868, AS925, AU915, CN470, CN779, EU433, IN865, KR920, US915.



Additional Information:

  • Item Code: LoRaST

View Complete Details

Yes, I am interested!

LoRaWAN Indoor Gateway (Multi Channel with 3G/4G)
  • LoRaWAN Indoor Gateway (Multi Channel with 3G/4G)
  • LoRaWAN Indoor Gateway (Multi Channel with 3G/4G)
Interested in this product?
Get Best Quote

LoRaWAN Indoor Gateway (Multi Channel with 3G/4G)

Rs 32,040 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Product Brochure Watch Video

Network Type3G, 4G
Model NumberLG308-EC- 25
Compatible BrandDragino
ColorWhite
Ethernet InterfaceYes
Power Supply12V DC
Sim InterfaceYes
Ethernet PortsYes
Processor24K MIPS
Flash16 MB
RAM64 MB
MCUATMega328P

The LG308 is an open source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via Wi-Fi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.


The LG308 is fully compatible with LoRaWAN protocol. It includes a SX1308 LoRa concentrator and a SX1276 LoRa transceiver, the sx1308 provides 10 programmable parallel demodulation paths and the SX1276 acts as TX channel so the SX1308 wont be block during TX. This combination provides higher capacity compare with a standalone SX1308 concentrator solution.

The LG308 has a built-in GPS module, the GPS module is connected to the SX1308 chip directly for TDoA LoRaWAN localization solution for ultra-low power or indoor solution.

Features:

  • Open Source OpenWrt system
  • Managed by Web GUI, SSH via LAN or Wi-Fi
  • Emulates 49x LoRa demodulators
  • LoRaWAN Gateway
  • SX1276 base separate TX path
  • 10 programmable parallel demodulation paths

Applications:

  • Smart Buildings & Home Automation
  • Logistics and Supply Chain Management
  • Smart Metering
  • Smart Agriculture
  • Smart Cities
  • Smart Factory

 

Specifications:

LoRa Spec:

  • 1 x SX1308 + 2 x 1257 LoRa Transceiver 
  • 1 x SX1276 LoRa Transceiver
  • 1 x GPS module for LoRa localization

General Specification:

  • 10M/100M RJ45 Ports x 2
  • 1 x 2.4G Wi-Fi (802.11 bgn)
  • 1 x USB host port
  • 1 x Mini-PCIe Interface
  • Power Input: 12v, 1A


Additional Information:

  • Item Code: LG308-EC25

View Complete Details

Yes, I am interested!

NB IoT Shield
  • NB IoT Shield
  • NB IoT Shield
Interested in this product?
Get Best Quote

NB IoT Shield

Rs 4,425 / PieceGet Latest Price

Product Brochure

BrandQuectel
Model NumberBC95-BC 20
Voltage2.7-3.5 V
Packaging TypeBox

NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage. Battery life of more than 10 years can be supported for a wide range of use cases.

New physical layer signals and channels are designed to meet the demanding requirement of extended coverage – rural and deep indoors – and ultra-low device complexity. An initial cost of the NB-IoT modules is expected to be comparable to GSM/GPRS. The underlying technology is however much simpler than today’s GSM/GPRS and its cost is expected to decrease rapidly as demand increases.

NB-IoT Shield is an expansion board for Arduino to add NB-IoT technology. With NB-IoT Shield and Arduino, a user can study/evaluate and do POC for NB-IoT solution rapidly.

 The NB-IoT Shield is loaded with offshore NB-IoT module. It includes:

Nb-IoT Shield QB08 uses Quectel BC95 module. The module is designed for only use in NB-IoT network and difference suffix reference to different NB-IoT Band.

Features:

·         Support different NB-IoT Bands, can use world widely

·         Low power consumption

·         Wide area coverage

·         AT command to controlAuto support 3.3v or 5v Arduino board

·         Compatible with Arduino Leonardo, Uno, Mega2560, DUE… etc

 

Applications: 

·         Smart metering (electricity, gas and water)

·         Facility management services

·         Intruder and fire alarms for homes & commercial properties

·         Connected personal appliances measuring health parameters

·         Tracking of persons, animals or objects

·         Smart city infrastructure such as street lamps or dustbins

Connected industrial appliances such as welding machines or air compressors

 

 

Specifications:

  • Output Power: 23dBm
  • Sensitivity : -129dBm
  • Operation Temperature: -40°C ~ +85°C
  • Input Vcc: 4.5v ~ 5.5v
  • Micro SIM Interfaces


Additional Information:

  • Item Code: NB-IoT_Shield-QB08

View Complete Details

Yes, I am interested!

LoRa Shield for Arduino
  • LoRa Shield for Arduino
  • LoRa Shield for Arduino
Interested in this product?
Get Best Quote

LoRa Shield for Arduino

Rs 2,520 / PieceGet Latest Price

BrandDragino
Power Acquisition25 mA
Power Tracking20 mA
Update Rate1 Hz
Voltage2.7-2.9 V

LoRa Shield for Arduino

View Complete Details

Yes, I am interested!

Lora Module
Interested in this product?
Get Best Quote

Lora Module

Rs 1,180 / UnitGet Latest Price

Minimum Order Quantity: 1 Unit

BrandDragino
DesignCustomized
Model Name/NumberLM502

The LM502 is a general LoRa Wireless Communication module, with integrated LoRa Radio Transceiver, SX1262 LoRa Modem and a 32-Bit RISC MCU CY8C4147AXI-S445from Cypress. The MCU uses ARM Cortex M0+, with 48MHz operation frequency. The LoRa Radio Transceiver has continuous frequency coverage from 150MHz to 960MHz. The LoRa Modem supports LoRa modulation for LPWAN use cases and (G)FSK modulation for legacy use cases. LM502 use the newest LoRa Modem SX1262 which provide high transmit power for ultra long range, ultra low power communication for LPWAN application. LM502 can achieve a high sensitivity of over -140dBm and the maximum transmit power is higher than +21dBm. This makes it suitable to be used in long range LPWAN and have high efficiency.

View Complete Details

Yes, I am interested!

LoRa Sensor Node v2
  • LoRa Sensor Node v2
  • LoRa Sensor Node v2
  • LoRa Sensor Node v2
  • LoRa Sensor Node v2
Interested in this product?
Get Best Quote

LoRa Sensor Node v2

Rs 5,500 / PieceGet Latest Price

Flash192 KB
Sram20 KB
Eeprom6 KB
Clock Speed32 Mhz
Voltage0.5-3.9 V
Operating Tempature-40-85 Degree C
RX Mode7.2 mA

LSN50 LoRa Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.LSN50 is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.


LSN50 wireless part is based on SX1276/SX1278 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.



View Complete Details

Yes, I am interested!

LoRa GPS for Raspberry-Pi
  • LoRa GPS for Raspberry-Pi
  • LoRa GPS for Raspberry-Pi
Interested in this product?
Get Best Quote

LoRa GPS for Raspberry-Pi

Rs 3,420 / UnitGet Latest Price

TypeWireless
Frequency865 - 867 MHZ
High Sensitivity-148 dBm
Maximum Link Budget168 dB
Accuracy2.5 m CEP

LoRa GPS HAT is a expansion module for LoRaWan and GPS for use with the Raspberry Pi.This product is intended for those interested in developing LoRaWAN solutions.

LoRa GPS HAT is based on the SX1276/SX1278 transceiver.The add on L80 GPS (Base on MTK MT3339) is designed for applications that use a GPS connected via the serial ports to the Raspberry Pi such as timing applications or general applications that require GPS information.

The transceivers of the HAT feature the LoRa™ long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.The Lora/GPD HAT can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRa™ also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.

 

This board can calculate and predict orbits automatically using the ephemeris data (up to 3 days) stored in internal flash memory, so the HAT can fix position quickly even at indoor signal levels with low power consumption.With AlwaysLocate™ technology, the Lora/GPS HAT can adaptively adjust the on/off time to achieve balance between positioning accuracy and power consumption according to the environmental and motion conditions.The GPS also supports automatic antenna switching function. It can achieve the switching between internal patch antenna and external active antenna.Moreover, it keeps positioning during the switching process.

View Complete Details

Yes, I am interested!

LoRa I/O Controller
  • LoRa I/O Controller
  • LoRa I/O Controller
  • LoRa I/O Controller
  • LoRa I/O Controller
Interested in this product?
Get Best Quote

LoRa I/O Controller

Rs 5,400 / UnitGet Latest Price

Product Brochure Watch Video

BrandDragino
Size13.5 x 7 x 3 cm
Weight105g
Packaging TypeBox

The Dragino LT series I/O Modules are Long Range Lora I/O Controller. It contains different I/O Interfaces such as analog current Input, analog voltage input, relay output, digital input, and digital output etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring.

 

The LT I/O Controllers allows the user to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

The LT I/O Controllers is aiming to provide an easy and low-cost installation by using LoRa wireless technology. 
The use environment includes: 
1) If the user’s area has LoRaWAN service coverage, they can just install the I/O controller and configure it connect the LoRaWAN provider via wireless. 
2) The user can set up a LoRaWAN gateway locally and configure the controller to connect to the gateway via wireless.

 


Features:

STM32L072CZT6 MCU

SX1276/78 LoRa Wireless Chip

LoRaWAN Class A & Class C protocol

Optional Customized LoRa Protocol

Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

AT Commands to change parameters

 

Applications:

Smart Buildings & Home Automation

Logistics and Supply Chain Management

Smart Metering

Smart Agriculture

Smart Cities

Smart Factory

 

Interfaces:

3 x Digital Input 

3 x Digital Output

2 x Relay Output (5A@250VAC / 30VDC)

2 x 0~20mA Analog Input (res:0.01mA)

2 x 0~30V Analog Input (res:0.01v)

Power Input 0~24V



Additional Information:

  • Item Code: LT-33222-L

View Complete Details

Yes, I am interested!

LoRaWAN GPS Tracker
Interested in this product?
Get Best Quote

LoRaWAN GPS Tracker

Rs 5,220 / UnitGet Latest Price

Minimum Order Quantity: 1 Unit

The Dragino??LoRaWAN GPS Tracker LGT-92??is an??open source??GPS tracker base on Ultra Low Power STM32L072 MCU and SX1276/1278 LoRa Module. LGT-92??includes a??low power GPS module L70??and??9-axis accelerometer??for motion and attitude detection. The power for both of the GPS module and accelerometer can be controlled by MCU to achieve the best energy profile for different applications. The LoRa wireless technology used in LGT-92 allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption. It targets professional tracking service. LGT-92 is powered by??1000mA Li-on battery, user can program the device to work from weeks??to months depends on the target use case. LGT-92 is an open source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found in ST site for rapid development.

View Complete Details

Yes, I am interested!

LoRaWAN Development Board
  • LoRaWAN Development Board
  • LoRaWAN Development Board
Interested in this product?
Get Best Quote

LoRaWAN Development Board

Rs 2,700 / UnitGet Latest Price

Minimum Order Quantity: 1 Unit

The??LM502 LoRaWAN Development board??is a breakout board with LM502 pre-load. The demo board provides??a rapid way to user to evaluate the feature of LM502. The demo board can be powered by??12v DC or USB port. The USB port of LM502 demo kit will be shown as one program port and??one CDC port in computer, the program port is for flash firmware and CDC port is for serial??access to LM502. The??LM502??is a general LoRa Wireless Communication module, with integrated LoRa Radio Transceiver,??SX1262 LoRa Modem and a 32-Bit RISC MCU CY8C4147AXI-S445??from Cypress.??The MCU uses ARM Cortex M0+, with 48MHz operation frequency. The LoRa Radio Transceiver??has continuous frequency coverage from 150MHz to 960MHz. The LoRa Modem supports LoRa modulation for LPWAN use cases and (G)FSK modulation for legacy use cases. LM502 use the newest LoRa Modem SX1262 which provide??high transmit power for ultra long??range, ultra low power communication??for LPWAN application. LM502 can achieve a??high sensitivity of over -140dBm??and the maximum??transmit power is??higher than +21dBm. This makes it suitable to be used in long range LPWAN and have high??efficiency. LM502 is provided with??ready to use LoRaWAN Modem software. Developers only need to??use AT Commands to control the module so to join the LoRaWAN network.??The LM502 also includes??programmable and reconfigurable analog and digital blocks??with??flexible automatic routing. Developer can use the rich I/Os to connect to their sensors and??provide a low cost / low power consumption / small size LoRaWAN End Node solution.

View Complete Details

Yes, I am interested!

IOT Trainer Kit
Interested in this product?
Get Best Quote

IOT Trainer Kit

Rs 22,000 / PieceGet Latest Price

Minimum Order Quantity: 1 Piece

Product Brochure

Power Supply5V
Power SourceUSB
Segment Display4x1 mm

We bring forth our vast industrial experience and expertise in this business, involved in providing IOT Trainer Kit.

Features:

• All in one IOT training platform.
    On Board SMT sensors.
    Developed  More than 20 Application examples.

Convenient of use
• Expanded and open trainer
• Hassle-free functioning

 



Additional Information:

  • Item Code: ETS-IOT_Trainer_Kit

View Complete Details

Yes, I am interested!
© Enthu Technology Solutions India Private Limited. All Rights Reserved (Terms of Use)