X

Envision Engineering Solutions

Coimbatore, Tamil Nadu

| GST  33AAEFE1533C1Z7

| TrustSEAL Verified

View Mobile Number 68% Response Rate

Home

> Our Product Range

> Gas Spring

Gas Spring

Manufacturer of a wide range of products which include Industrial Gas Spring, Gas Spring Valve, Gas Spring Long Stroke and Lockable Traction Gas Spring.

Industrial Gas Spring
Interested in this product?
Get Best Quote

Industrial Gas Spring

Rs 3,000 / onwardsGet Latest Price

Mounting: In any position Advice: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. End position damping length: Strong end position damping approx. 20 to 70 mm (depending on the stroke) and slow extension speed. Progression: Approx. 39 % to 50 %, F2 max. 1 950 N Available force range F1 at 20 °C: 80 N to 1 300 N Material: Body: Black powder coated steel. Piston rod: Ceramic coated steel. End fittings: Zinc plated steel. On request: Without damping, standard length damping, special force curves, special lengths, alternative end fittings, stainless steel.

Industrial Gas Spring GS-10 (Push Type) Extension Forces 10 N to 100 N (when Piston Rod Compressed up to 120 N)

View Complete Details

Yes, I am interested!

Gas Spring Valve
Interested in this product?
Get Best Quote

Gas Spring Valve

Rs 3,000 / onwardsGet Latest Price

Adjustment Instructions :

  • Hold gas spring piston rod down
  • Remove any fitting attached to the body end of the gas spring (GZ version the piston rod).
  • Insert adjuster knob on thread end on the cylinder body (on GZ version thread end on the piston rod). When resistance is felt, proceed slowly and with caution. This opens the valve and you can hear the nitrogen escaping and reducing pressure. Turn back the adjusting knob immediately, to avoid too much nitrogen being discharged
  • After adjustment, remove the Adjuster knob, mount the end fittings and test the gas spring in your application. If necessary repeat the procedure. If you use 2 gas springs in parallel, both gas springs should have the same force to avoid bending forces or side load on the application. If necessary return to ACE to refill both gas springs to the same (average) force. If too much nitrogen is discharged, the units can be returned to ACE for re-gassing

View Complete Details

Yes, I am interested!

Gas Spring Long Stroke
Interested in this product?
Get Best Quote

Gas Spring Long Stroke

Rs 3,000 / onwardsGet Latest Price

When compressing the piston rod, there is an additional friction force caused by the contact pressure of the seals (this only occurs during the compression stroke) FR F3 = force at the beginning of the compression stroke F4 = force at the end of the compression stroke.

F1 = nominal force at 20 °C (this is the pressure figure normally used when specifying the gas spring) F2 = force in the complete compressed position

View Complete Details

Yes, I am interested!

Lockable Traction Gas Spring
Interested in this product?
Get Best Quote

Lockable Traction Gas Spring

Rs 3,000 / onwardsGet Latest Price

With vast industrial experience, we have engaged ourselves in offering a wide range of Lockable Traction Gas Spring. Offered Lockable Traction Gas Spring is procured with our reliable vendors, who manufacture this Lockable Traction Gas Spring using high grade material. This Lockable Traction Gas Spring can be avail from us at industrial leading price.

Features:


  • Quality tested
  • Precisely engineered
  • Easy to install

View Complete Details

Yes, I am interested!
© Envision Engineering Solutions. All Rights Reserved (Terms of Use)