Everyday Health & Hygiene Care

Power	90W
Brand	ResMed
Model	Airsense 10
AC Input Range	100-240V,50-60Hz 1-1.5A,Class II,115V,400Hz 1.5A,Class I
DC Output	24V 3.75A
Typical Power Consumption	53W
Peak Power Consumption	104W

A comfortable start The AirSense 10 CPAP machine is designed to help you comfortably adjust to sleep apnea therapy. Featuring a sleek design and advanced comfort technology, the AirSense 10 CPAP machine will help you stay on track with your day-to-day sleep apnea therapy.



Key Features:

Press start and go. The AirSense 10 CPAP machine has been designed to make therapy easy. With no complicated settings or menus to navigate, simply press Start and you’re ready to go.

The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner.

The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.

The SmartStart™ function begins your sleep apnea therapy as soon as you breathe into your mask. When you remove your mask, it stops automatically after a few seconds.

The built-in ambient light sensor adjusts to the brightness of the room. So if you need to get up during the night, the screen’s back light won’t disrupt your bed partner. The light also turns off automatically, so you can settle back to sleep without disturbance.

Operating Temperature:
+41°F to +95°F (+5°C to +35°C) Note:
The air flow for breathing produced by this therapy device can be higher than the temperature of the room.
Under extreme ambient temperature conditions (104°F/40°C) the device remains safe.
Operating humidity:  10 to 95% relative humidity, non-condensing
Operating altitude:  Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
Storage and transport temperature:  -4°F to +140°F (-20°C to +60°C)
Storage and transport humidity:  5 to 95% relative humidity, non-condensing


Electromagnetic Compatibility:
The AirSense 10 complies with all applicable electromagnetic
compatibility requirements (EMC) according to IEC60601-1-2:2007, for residential, commercial and light industry environments.
It is recommended that mobile communication devices are kept at least 1 m away from the device.
Information regarding the electromagnetic emissions and immunity of this ResMed device can be found on www.resmed.com, on the Products page under Service and Support.

IEC 60601-1:2005 classification Class II (double insulation), Type BF, Ingress protection IP22.

Sensors:
Pressure sensor:  Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O
Flow sensor:  Internally located at device inlet, digital mass flow type, -70 to +180 L/min


Maximum single fault steady pressure: Device will shut down in the presence of a single fault if the steady state pressure exceeds:
30 cm H2O for more than 6 sec or 40 cm H2O for more than 1 sec.


Sound: Pressure level measured according to ISO 17510-1:2007 (CPAP mode):
SlimLine:  26.6 dBA with uncertainty of 2 dBA
Standard:  26.6 dBA with uncertainty of 2 dBA
Power level measured according to ISO 17510-1:2007 (CPAP mode):
SlimLine:  34.6 dBA with uncertainty of 2 dBA
Standard: 34.6 dBA with uncertainty of 2 dBA
Declared dual-number noise emission values in accordance with ISO 4871:1996.

Price Range: Rs.22000-40000/Piece

Brand	BMC
Wide Flow Rate	04,20,cmH2O
Domestic Warranty	2 Year
Convenience Features	Data Transfer-SD Card/iCode/iCodeQR/iCOdeQR+
Display	Digital

General
Price Range: Rs.22000-40000/Piece