Findx Pro

Additional Information:

• Item Code: UNO
• Production Capacity: more than 2000
• Delivery Time: 1 day
• Packaging Details: Promising Qualiity

The micro- SD Card Module is a simple solution for transferring data to and from a standard SD card. The pin out is directly compatible with Arduino, but can also be used with other microcontrollers. It allows you to add mass storage and data logging to your project.

This module has SPI interface which is compatible with any sd card and it use 5V or 3.3V power supply which is compatible with Arduino UNO/Mega.

SD module has various applications such as data logger, audio, video, graphics. This module will greatly expand the capability an Arduino can do with their poor limited memory.

Specifications

• Working Voltage: 5V/3.3V
• Size:20x28mm
• Interface: SPI
• Compatible: MicroSD

Additional Information:

• Item Code: SD
• Production Capacity: more than 2000
• Delivery Time: 1 day
• Packaging Details: Promising Quality

 PIC Development Board is proposed to smooth the progress of developing and debugging of various designs encompassing Microcontrollers from Microchip. It's designed as to facilitate (16F/18F 40PIN DIP) On-board Programmer for PIC Microcontroller through ISP on Universal Serial port

Microchip PIC 16F877A (with 20 MHz Crystal Oscillator & Boot loader Software)
High Performance RISC CPU.
8 K Words Programmable Flash Memory.
368 bytes Data Memory (RAM)
256 bytes EEPROM.
20 MHz Operation (200ns instruction cycle)
33 I/O pins.
8-Channel 10-bit Analog to Digital Converter (ADC)

Additional Information:

• Production Capacity: 2000
• Delivery Time: 4 days

Additional Information:

• Production Capacity: 2000
• Delivery Time: 4 days

We are one of the foremost firms of Raspberry Pi O. Besides, we present this product at nominal rates to our customers.

Additional Information:

• Delivery Time: 2 days
• Packaging Details: Promising quality

1. STM32F407VET6:the high performance STM32 MCU which features:
   • Core: Cortex-M4 32-bit RISC
   • Feature: a full set of single-cycle DSP instructions
   • Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
   • Operating Voltage: 1.8V-3.6V
   • Package: LQFP100
   • Memories: 512kB Flash, 192+4kB SRAM
   • MCU communication Interfaces:
     • 3 x SPI, 3 x USART, 2 x UART, 2 x I2S, 3 x I2C
     • 1 x FSMC, 1 x SDIO, 2 x CAN
     • 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
     • 1 x 10/100 Ethernet MAC
     • 1 x 8 to 12-bit parallel camera interface
   • AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
   • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator
3. MIC2075 (on bottom side): onboard USB power management device
4. Power supply switch, powered from 5Vin or USB connection
5. Boot mode switch, for configuring BOOT0 pin
6. Power indicator
7. Reset button
8. 8M crystal oscillator
9. 32.768K crystal (on bottom side), for internal RTC with calibration
10. JTAG/SWD interface: for debugging/programming
11. USB connector, used for establishing USB communication between PC and the STM32 development board
12. IO expander (including VCC/GND), all the MCU pins are accessible on expansion connectors for further expansion
13. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG
14. USB jumper
    • short the jumper when using USB
    • open the jumper to disconnect from I/O ports
15. VBAT selection jumper
    • short the jumper to use system power supply
    • open the jumper to connect the VBAT to external power, such as battery
16. VREF selection jumper
    • short the jumper to connect VREF+/VREF- to VCC/GND
    • open the jumper to connect VREF+/VREF- to other custom pin via jumper wire

Additional Information:

• Delivery Time: 2 days

Additional Information:

• Item Code: 800a
• Production Capacity: more than 2000
• Delivery Time: 1 day
• Packaging Details: Promising Quality

•     Voltage: 4.5-5.5V
•     Current: <40mA
•     Digital Interface: 5V TTL level UART interface
•     Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface
•     Recognition accuracy: 99% (under ideal environment)
•     Support maximum 80 voice commands, with each voice 1500ms
•     Maximum 7 voice commands effective at same time
•     Easy Control: UART/GPIO
•     User-control General Pin Output

Additional Information:

• Item Code: voice
• Production Capacity: more than 2000
• Delivery Time: 1 day
• Packaging Details: Promising Quality

Additional Information:

• Delivery Time: 2 days
• Packaging Details: Promising Quality

Additional Information:

• Item Code: sd1
• Production Capacity: more than 2000
• Delivery Time: 1 day
• Packaging Details: Promising Quantity

Additional Information:

• Item Code: rtc
• Production Capacity: more than 2000
• Delivery Time: 1 day
• Packaging Details: Promising Quality

One can avail from us a quality approved assortment of 8 Channel Relay.  Owing to their top quality, our products are extremely praised amongst the patrons. 

Additional Information:

• Delivery Time: 2 days
• Packaging Details: Promising Quality

Additional Information:

• Delivery Time: 2 days

Additional Information:

• Delivery Time: 2 days
• Packaging Details: Promising Quality

Additional Information:

• Delivery Time: 2 days