X
I agree to the terms and privacy policy

FountainHead Alloys

Mumbai, Maharashtra

| GST  27AKOPC9787G1ZI

| TrustSEAL Verified

View Mobile Number 87% Response Rate

Home

> Our Products

> Aluminium Alloys

Our Products

+View All

Aluminium Alloys

Pure aluminium is relatively soft. To overcome this, the metal can be alloyed with other metals (alloying elements). Most of the aluminium reaching the marketplace has been alloyed with at least one other element.Based on the type of alloying element, the aluminium alloys are divided into 8 groups  
 Alloy code
 1xxx Series
 2xxx Series
 3xxx Series
 4xxx Series
 5xxx Series The alloying element is magnesium. Alloys of this series are moderate in strength (200 – 350 MPa). The strength is achieved by the heat treatment processing or forming. Alloys of this series have excellent resistance to corrosion in aggressive atmosphere and seawater.
 6xxx Series The alloying elements are magnesium and silicon. Alloys of this series are moderate in strength (200 – 350 MPa). The strength is achieved by the heat treatment processing or forming. Alloys of 6xxx series can be easily anodized.
 7xxx Series The alloying element is zinc. Alloys of this series have the highest strength among all series. The tensile strengths ranging between 450 – 500 MPa may exceed 600 MPa in some cases. These alloys prone to stress corrosion, especially when welded.
 8xxx Series The alloying element is other than for the other series (including lithium).

Aluminium Alloys 6005 62400 C51S - Sheet
Interested in this product?
Get Best Quote

Aluminium Alloys 6005 62400 C51S - Sheet

Rs 520 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

TypeSheet
Grade6005/6005A
Thickness0.5 to 45mm Thickness
MaterialAluminium
Size3 to 24 Meter
Material GradeA96005,AlSiMg,AlSiMg(A)
BrandJindal
Tolerance-0.00mm/+5.00mm
Aluminium Grade6005
I Deal InNew Only
Is It CustomizedNon Customized

Aluminium alloy 6005i s a medium strength, heat treatable alloy with excellent corrosion resistance.

Alloy 6005 has properties between those of alloys 6061 and 6082 and can sometimes be used interchangeably with these alloys but 6005/6005A has better extrusion characteristics. It has a better mill surface finish, but it is difficult to produce thin-wall complicated shapes in 6005/6005A.

6005 has very good bending properties.

Chemical Composition

Table 1. Chemical composition for aluminium alloy 6005

Element

% Present

Si

0.5-0.9

Fe

0.0-0.35

Cu

0.0-0.3

Mn

0.0-0.5

Mg

0.4-0.7

Zn

0.0-0.2

Ti

0.0-0.1

Cr

0.0-0.3

Mn+Cr

0.12-0.5

Al

Balance

Properties

Mechanical Properties

Table 2 (a). Mechanical properties for aluminium alloy 6005 T6

BS EN 755-2:2008
Rod Bar
up to 25mm Dia. A/F

Property

Value

Proof Stress

225 Min MPa

Tensile Strength

270 Min MPa

Elongation A50 mm

8 %

Shear Strength

205 MPa

Hardness Brinell

90 HB

Elongation A

10 Min %

Blue:3000

Size:5 TO 500MM

Brand:IMPORTED

 

 



Additional Information:

  • Item Code: AluminumAlloys_6005_62400_C51S_Sheet-Plate
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 6066 64423 H11 C62S - Sheet/Plate
Interested in this product?
Get Best Quote

Aluminium Alloys 6066 64423 H11 C62S - Sheet/Plate

Rs 510 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Thickness2 mm
Grade6066
Size6 to 24 Meter
TypePlate
MaterialAluminium
Tolerance-0.00mm/+5.00mm
FinishBright Smooth Finish
I Deal InNew Only

Introduction

Aluminium / Aluminum alloys have good corrosion resistance. They tend to lose some of their strength when subjected to high temperatures. However, their strength can be increased when exposed to subzero temperatures.

The following datasheet gives an overview of Aluminium / Aluminum 6066 alloy.

Blue:5000

Size:5 TO 500MM

Brand:IMPORTED

 

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6066 alloy.

ElementContent (%)
Aluminium / Aluminum, Al95.7
Silicon, Si1.40
Magnesium, Mg1.10
Copper, Cu1
Manganese, Mn0.8
Physical Properties
PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939- 0.101 lb/in3
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6066 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength150 MPa21755 psi
Yield strength83 MPa12038 psi
Shear strength97 MPa14069 psi
Fatigue strength110 MPa15954 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Hardness4343


Additional Information:

  • Item Code: AluminiumAlloys_6066_64423_H11_C62S-Sheet-Plate
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 7039 D74S 74530 - Sheet
Interested in this product?
Get Best Quote

Aluminium Alloys 7039 D74S 74530 - Sheet

Rs 440 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Thickness6 mm
GradeAluminium 7039
Size0.5 to 45mm Thick
TypeSheet
MaterialAluminum Alloy
Tolerance-0.00mm/+5.00mm
FinishBright Smooth Finish
I Deal InNew Only

Introduction

Aluminium / aluminum is one of the lightest available commercial metals with a density approximately one-third that of steel or copper. It can be easily fabricated into many forms such as foil, sheets, rod, tube, geometric shapes, and wire.

Aluminium / aluminum 7039 alloy is a heat treatable wrought alloy. The following datasheet will provide more details about aluminium / aluminum 7039 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 7039 alloy.

Thickness: 0-1 mm, 1-2 mm ,2-3 mm, 3-4 mm, 4-5 mm, >5 mm

Blue:4200

Size:5 TO 500MM

Brand:IMPORTED

 

ElementContent (%)
Zinc, Zn3.5 - 4.5
Magnesium, Mg2.3 - 3.3
Silicon, Si0.3 max
Iron, Fe0.4 max
Chromium, Cr0.15 - 0.25
Manganese, Mn0.1 - 0.4
Copper, Cu0.1 max
Titanium, Ti0.1 max
Remainder (total)0.15 max
Aluminum, AlRemainder
Physical Properties

The physical properties of aluminium / aluminum 7039 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.74 g/cm³0.0990 lb/in³
Melting point482-638°C900-1180 °F
Mechanical Properties

The mechanical properties of aluminium / aluminum 7039-T64 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength (@diameter 12.7 mm/0.500 in)450 MPa65300 psi
Yield strength (@diameter 12.7 mm/0.500 in)380 MPa55100 psi
Elongation at break (@diameter 12.7 mm/0.500 in)13%13%
Elastic modulus69.6 GPa10100 ksi
Shear strength255 MPa37000 psi
Hardness, Brinell (@load 500 kg; thickness 10.0 mm/1100 lb;0.394 in)133133
Hardness, Knoop (converted from Brinell hardness value)167167
Hardness, Rockwell A (converted from Brinell hardness value)5050
Hardness, Rockwell B (converted from brinell hardness value)8181
Hardness, Vickers (converted from Brinell hardness value)153153


Additional Information:

  • Item Code: AluminiumAlloys7039_D74S_74530-Sheet-Plate
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 7075 DTD-5124 755 Al-Zn 6 Mg Cue - Sheet
Interested in this product?
Get Best Quote

Aluminium Alloys 7075 DTD-5124 755 Al-Zn 6 Mg Cue - Sheet

Rs 465 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

GradeAluminium 7075
BrandFHA
Thickness0.5 to 50mm Thick
MaterialUNS A97075
ShapeSheet
Size4Inch
Material GradeUNS A97075
Aluminium Grade7075
FinishingBright Smooth Finish
Test CertificateEN 3.1 Inspection Report
Tolerance-0.00mm/+5.00mm
CertificationEN 3.1 Inspection Report

Introduction

Aluminum alloys have strong corrosion resistance. At subzero temperatures, their strength increases, thus making them a useful low-temperature alloy. Their strength decreases if they are subjected to very high temperatures. The aluminum 7075 alloy has high strength.

The following datasheet gives more details about the aluminum 7075 alloy.

Black:6000
Dimensions (l x b x h):5 TO 500MM
Weight:50 TO 500Kg

 

Chemical Composition

The following table shows the chemical composition of the aluminum 7075 alloy.

ElementContent (%)
Aluminum, Al90
Zinc, Zn5.6
Magnesium, Mg2.5
Copper, Cu1.6
Chromium, Cr0.23
Physical Properties

The physical properties of aluminum 7075 alloy are tabulated below.

PropertiesMetricImperial
Density2.8 g/cm30.101 lb/in3
Melting point483°C900°F
Mechanical Properties

The mechanical properties of aluminum 7075 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength220 MPa31909 psi
Yield strength95 MPa13779 psi
Shear strength150 MPa21756 psi
Fatigue strength160 MPa23206 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Elongation at break17%17%
Hardness6060


Additional Information:

  • Item Code: AluminumAlloys-7075_DTD-5124-Sheet
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 7020 -  Forged Block
Interested in this product?
Get Best Quote

Aluminum Alloys 7020 - Forged Block

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Blue4000
BrandIndef, Cranlik, Vital
Capacity0-1 ton, 1-3 ton, 3-6 ton, 6-10 ton, 10-15 ton, >15 ton
Chain Length (meters)0-2 , 2-4, 4-6, 6-8, 8-10, >10
Trolley OptionWith Trolley, Without Trolley

Introduction

The principal alloying ingredients in aluminium / aluminum alloys include manganese, magnesium, copper, zinc and silicon. The market for aluminium / aluminum and its alloys is huge. About 22 million t is newly manufactured aluminium and 7 million t is recycled aluminium scrap.

Aluminium / aluminum 7020 alloy is a heat treatable wrought alloy. Zinc forms a major part of this alloy.

The following datasheet will provide more details about aluminium / aluminum 7020 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 7020 alloy.

ElementContent (%)
Zinc, Zn4-5
Magnesium, Mg1-1.40
Zirconium, Zr + Titanium, Ti0.80 - 0.25
Iron, Fe0.4
Silicon, Si0.35
Copper, Cu0.2
Chromium, Cr0.10 - 0.35
Zirconium, Zr0.080 - 0.20
Manganese, Mn0.050 - 0.50
Other (each)0.05 max
Other (total)0.15 max
Aluminum, AlRemainder
Physical Properties

The physical properties of aluminium / aluminum 7020 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.78 g/cm³0.100 lb/in³
Mechanical Properties

The mechanical properties of aluminium / aluminum 7020-T6 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength (@thickness ≤100 mm/≤3.94 in)≥ 350 MPa≥ 50800 psi
Yield strength (@thickness ≤100 mm/≤3.94 in)≥ 280 MPa≥ 40600 psi
Elongation at break (@thickness ≤100 mm/≤3.94 in)≥ 10%≥ 10%


Additional Information:

  • Item Code: AluminumAlloys7020ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 6101 63401 91E D50S E.Al.Mg.Si 0.5 - Pipe
Interested in this product?
Get Best Quote

Aluminum Alloys 6101 63401 91E D50S E.Al.Mg.Si 0.5 - Pipe

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

ShapeOval, Rectangular, Square, Round
Size1, 1.5, 3, 2, 4
Unit Length12 m, 18 m, 24m, 6 m
Surface FinishMill Finished, Anodized, Finished Polished, Brushed
Red4500

Introduction

Aluminium / Aluminum alloys have good corrosion resistance. The strength of these alloys can be reduced when they are exposed to high temperatures. However, their strength can be increased at subzero temperatures. Aluminium / Aluminum 6101 alloy has good mechanical strength and high electrical conductivity.

The following datasheet will discuss in detail about Aluminium / Aluminum 6101 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6101 alloy.

ElementContent (%)
Aluminium / Aluminum, Al98.9
Magnesium, Mg0.60
Silicon, Si0.50
Physical Properties

The physical properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesMetricImperial
Density2.7 g/cm30.0975 lb/in3
Melting point588°C1090°F
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6101 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength97 MPa14069 psi
Yield strength76 MPa11023 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Thermal Properties

The thermal properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesConditions
T (ºC)Treatment
Thermal expansion23 (10-6/ºC)20-100-
Thermal conductivity218 W/mK25T6


Additional Information:

  • Item Code: AluminumAlloys_6101_63401-Pipe
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 7020 - Round Bar
Interested in this product?
Get Best Quote

Aluminium Alloys 7020 - Round Bar

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

BrandIMPORTED
UsageConstruction , Manufacturing, Household Repair
Size5 TO 500MM DIA
Single Piece Length36 meter, 18 meter, 3 meter, >36 meter, 6 meter
Black6500

Introduction

The principal alloying ingredients in aluminium / aluminum alloys include manganese, magnesium, copper, zinc and silicon. The market for aluminium / aluminum and its alloys is huge. About 22 million t is newly manufactured aluminium and 7 million t is recycled aluminium scrap.

Aluminium / aluminum 7020 alloy is a heat treatable wrought alloy. Zinc forms a major part of this alloy.

The following datasheet will provide more details about aluminium / aluminum 7020 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 7020 alloy.

ElementContent (%)
Zinc, Zn4-5
Magnesium, Mg1-1.40
Zirconium, Zr + Titanium, Ti0.80 - 0.25
Iron, Fe0.4
Silicon, Si0.35
Copper, Cu0.2
Chromium, Cr0.10 - 0.35
Zirconium, Zr0.080 - 0.20
Manganese, Mn0.050 - 0.50
Other (each)0.05 max
Other (total)0.15 max
Aluminum, AlRemainder
Physical Properties

The physical properties of aluminium / aluminum 7020 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.78 g/cm³0.100 lb/in³
Mechanical Properties

The mechanical properties of aluminium / aluminum 7020-T6 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength (@thickness ≤100 mm/≤3.94 in)≥ 350 MPa≥ 50800 psi
Yield strength (@thickness ≤100 mm/≤3.94 in)≥ 280 MPa≥ 40600 psi
Elongation at break (@thickness ≤100 mm/≤3.94 in)≥ 10%≥ 10%


Additional Information:

  • Item Code: AluminiumAlloys_7020-RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 6201 64401 -  Round Bar
Interested in this product?
Get Best Quote

Aluminium Alloys 6201 64401 - Round Bar

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

BrandIMPORTED
UsageConstruction , Manufacturing, Household Repair
Size5 TO 500MM DIA
Single Piece Length3 meter, 6 meter, 36 meter, >36 meter, 18 meter
Black4300

Introduction

Aluminum alloys are known for their strong corrosion resistance. They are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). However, the strength of Aluminium / Aluminum alloys can be enhanced at subzero temperatures, thus making them perfect low-temperature alloys.

Aluminium / Aluminum 6201 alloy is a wrought alloy type. The following datasheet will provide more details about Aluminium / Aluminum 6201 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6201 alloy.

ElementContent (%)
Aluminum, Al98.5
Magnesium, Mg0.80
Silicon, Si0.70
Physical Properties

The physical properties of Aluminium / Aluminum 6201 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939-0.1011 lb/in³
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6201 alloy are tabulated below.

PropertiesMetricImperial
Elastic modulus70-80 GPa10152-11603 ksi
Poisson’s ratio0.330.33


Additional Information:

  • Item Code: AluminiumAlloys6201_64401-RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 7039 D74S 74530 - Round Bar
Interested in this product?
Get Best Quote

Aluminium Alloys 7039 D74S 74530 - Round Bar

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

BrandIMPORTED
UsageHousehold Repair, Construction, Manufacturing
Size5 TO 500MM DIA
Single Piece Length>36 meter, 18 meter, 6 meter, 3 meter, 36 meter
Blue5000

Introduction

Aluminium / aluminum is one of the lightest available commercial metals with a density approximately one-third that of steel or copper. It can be easily fabricated into many forms such as foil, sheets, rod, tube, geometric shapes, and wire.

Aluminium / aluminum 7039 alloy is a heat treatable wrought alloy. The following datasheet will provide more details about aluminium / aluminum 7039 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 7039 alloy.

ElementContent (%)
Zinc, Zn3.5 - 4.5
Magnesium, Mg2.3 - 3.3
Silicon, Si0.3 max
Iron, Fe0.4 max
Chromium, Cr0.15 - 0.25
Manganese, Mn0.1 - 0.4
Copper, Cu0.1 max
Titanium, Ti0.1 max
Remainder (total)0.15 max
Aluminum, AlRemainder
Physical Properties

The physical properties of aluminium / aluminum 7039 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.74 g/cm³0.0990 lb/in³
Melting point482-638°C900-1180 °F
Mechanical Properties

The mechanical properties of aluminium / aluminum 7039-T64 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength (@diameter 12.7 mm/0.500 in)450 MPa65300 psi
Yield strength (@diameter 12.7 mm/0.500 in)380 MPa55100 psi
Elongation at break (@diameter 12.7 mm/0.500 in)13%13%
Elastic modulus69.6 GPa10100 ksi
Shear strength255 MPa37000 psi
Hardness, Brinell (@load 500 kg; thickness 10.0 mm/1100 lb;0.394 in)133133
Hardness, Knoop (converted from Brinell hardness value)167167
Hardness, Rockwell A (converted from Brinell hardness value)5050
Hardness, Rockwell B (converted from brinell hardness value)8181
Hardness, Vickers (converted from Brinell hardness value)153153


Additional Information:

  • Item Code: AluminiumAlloys_7039_D74S_74530-RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 6005 62400 C51S - Round Bar
Interested in this product?
Get Best Quote

Aluminium Alloys 6005 62400 C51S - Round Bar

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

BrandIMPORTED
UsageManufacturing, Construction, Household Repair
Size5 TO 500MM DIA
Single Piece Length>36 meter, 18 meter, 6 meter, 3 meter, 36 meter
Blue6200

Aluminium alloy 6005i s a medium strength, heat treatable alloy with excellent corrosion resistance.

Alloy 6005 has properties between those of alloys 6061 and 6082 and can sometimes be used interchangeably with these alloys but 6005/6005A has better extrusion characteristics. It has a better mill surface finish, but it is difficult to produce thin-wall complicated shapes in 6005/6005A.

6005 has very good bending properties.

Chemical Composition

Table 1. Chemical composition for aluminium alloy 6005

Element

% Present

Si

0.5-0.9

Fe

0.0-0.35

Cu

0.0-0.3

Mn

0.0-0.5

Mg

0.4-0.7

Zn

0.0-0.2

Ti

0.0-0.1

Cr

0.0-0.3

Mn+Cr

0.12-0.5

Al

Balance

Properties

Mechanical Properties

Table 2 (a). Mechanical properties for aluminium alloy 6005 T6

BS EN 755-2:2008
Rod Bar
up to 25mm Dia. A/F

Property

Value

Proof Stress

225 Min MPa

Tensile Strength

270 Min MPa

Elongation A50 mm

8 %

Shear Strength

205 MPa

Hardness Brinell

90 HB

Elongation A

10 Min %

 

 

 



Additional Information:

  • Item Code: AluminiumAlloys_6005_62400_C51S-RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 6005 62400 C51S - Forged Block
Interested in this product?
Get Best Quote

Aluminum Alloys 6005 62400 C51S - Forged Block

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Application Chemical Fertilizer Pipe, Gas Pipe, Structure Pipe, Hydraulic Pipe, Pneumatic Connections
BrandIMPORTED
Thread Size5 TO 500MM
Size1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch
Green5000

 

Aluminium alloy 6005i s a medium strength, heat treatable alloy with excellent corrosion resistance.

Alloy 6005 has properties between those of alloys 6061 and 6082 and can sometimes be used interchangeably with these alloys but 6005/6005A has better extrusion characteristics. It has a better mill surface finish, but it is difficult to produce thin-wall complicated shapes in 6005/6005A.

6005 has very good bending properties.

Chemical Composition

Table 1. Chemical composition for aluminium alloy 6005

Element

% Present

Si

0.5-0.9

Fe

0.0-0.35

Cu

0.0-0.3

Mn

0.0-0.5

Mg

0.4-0.7

Zn

0.0-0.2

Ti

0.0-0.1

Cr

0.0-0.3

Mn+Cr

0.12-0.5

Al

Balance

Properties

Mechanical Properties

Table 2 (a). Mechanical properties for aluminium alloy 6005 T6

BS EN 755-2:2008
Rod Bar
up to 25mm Dia. A/F

Property

Value

Proof Stress

225 Min MPa

Tensile Strength

270 Min MPa

Elongation A50 mm

8 %

Shear Strength

205 MPa

Hardness Brinell

90 HB

Elongation A

10 Min %

 

 

 



Additional Information:

  • Item Code: AluminumAlloys_6005_62400_C51S-ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 7075 DTD-5124  Al-Zn 6 Mg Cue - Forget Block
Interested in this product?
Get Best Quote

Aluminum Alloys 7075 DTD-5124 Al-Zn 6 Mg Cue - Forget Block

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Weight50 TO 500Kg
AnodisedYes
Dimensions (l x b x h)5 TO 500MM
Red3000

Introduction

Aluminum alloys have strong corrosion resistance. At subzero temperatures, their strength increases, thus making them a useful low-temperature alloy. Their strength decreases if they are subjected to very high temperatures. The aluminum 7075 alloy has high strength.

The following datasheet gives more details about the aluminum 7075 alloy.

Chemical Composition

The following table shows the chemical composition of the aluminum 7075 alloy.

ElementContent (%)
Aluminum, Al90
Zinc, Zn5.6
Magnesium, Mg2.5
Copper, Cu1.6
Chromium, Cr0.23
Physical Properties

The physical properties of aluminum 7075 alloy are tabulated below.

PropertiesMetricImperial
Density2.8 g/cm30.101 lb/in3
Melting point483°C900°F
Mechanical Properties

The mechanical properties of aluminum 7075 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength220 MPa31909 psi
Yield strength95 MPa13779 psi
Shear strength150 MPa21756 psi
Fatigue strength160 MPa23206 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Elongation at break17%17%
Hardness6060


Additional Information:

  • Item Code: AluminumAlloys_7075_DTD-5124-ForgetBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 7020 - Pipe/Tube
Interested in this product?
Get Best Quote

Aluminium Alloys 7020 - Pipe/Tube

Get Latest Price

Minimum Order Quantity: 50 Kilogram

Unit Length (meters)3 , 6, 18, 12
Surface FinishSand Blasted
Surface FinishBrushed, Finished Polished, Mill Finished, Anodized
Pipe FluidChemical, Water, Slurry, Gas, Steam
Material GradeSS304, SS204, SS316L, SS316
Size (inch)1, 3/4, 2, 3, >3, 1/2
Green6500

Introduction

The principal alloying ingredients in aluminium / aluminum alloys include manganese, magnesium, copper, zinc and silicon. The market for aluminium / aluminum and its alloys is huge. About 22 million t is newly manufactured aluminium and 7 million t is recycled aluminium scrap.

Aluminium / aluminum 7020 alloy is a heat treatable wrought alloy. Zinc forms a major part of this alloy.

The following datasheet will provide more details about aluminium / aluminum 7020 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 7020 alloy.

ElementContent (%)
Zinc, Zn4-5
Magnesium, Mg1-1.40
Zirconium, Zr + Titanium, Ti0.80 - 0.25
Iron, Fe0.4
Silicon, Si0.35
Copper, Cu0.2
Chromium, Cr0.10 - 0.35
Zirconium, Zr0.080 - 0.20
Manganese, Mn0.050 - 0.50
Other (each)0.05 max
Other (total)0.15 max
Aluminum, AlRemainder
Physical Properties

The physical properties of aluminium / aluminum 7020 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.78 g/cm³0.100 lb/in³
Mechanical Properties

The mechanical properties of aluminium / aluminum 7020-T6 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength (@thickness ≤100 mm/≤3.94 in)≥ 350 MPa≥ 50800 psi
Yield strength (@thickness ≤100 mm/≤3.94 in)≥ 280 MPa≥ 40600 psi
Elongation at break (@thickness ≤100 mm/≤3.94 in)≥ 10%≥ 10%


Additional Information:

  • Item Code: AluminiumAlloys7020_Pipe-Tube
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 7039 D74S 74530 - Pipe/Tube
Interested in this product?
Get Best Quote

Aluminium Alloys 7039 D74S 74530 - Pipe/Tube

Get Latest Price

Minimum Order Quantity: 50 Kilogram

Unit Length (meters)12, 3, 6, 18
Surface FinishSand Blasted
Surface FinishFinished Polished, Anodized, Mill Finished, Brushed
Pipe FluidWater, Gas, Slurry, Steam, Chemical
Material GradeSS316, SS316L, SS304, SS204
Size (inch)3/4, 1, 2, >3, 1/2, 3
Green3200

Introduction

Aluminium / aluminum is one of the lightest available commercial metals with a density approximately one-third that of steel or copper. It can be easily fabricated into many forms such as foil, sheets, rod, tube, geometric shapes, and wire.

Aluminium / aluminum 7039 alloy is a heat treatable wrought alloy. The following datasheet will provide more details about aluminium / aluminum 7039 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 7039 alloy.

ElementContent (%)
Zinc, Zn3.5 - 4.5
Magnesium, Mg2.3 - 3.3
Silicon, Si0.3 max
Iron, Fe0.4 max
Chromium, Cr0.15 - 0.25
Manganese, Mn0.1 - 0.4
Copper, Cu0.1 max
Titanium, Ti0.1 max
Remainder (total)0.15 max
Aluminum, AlRemainder
Physical Properties

The physical properties of aluminium / aluminum 7039 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.74 g/cm³0.0990 lb/in³
Melting point482-638°C900-1180 °F
Mechanical Properties

The mechanical properties of aluminium / aluminum 7039-T64 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength (@diameter 12.7 mm/0.500 in)450 MPa65300 psi
Yield strength (@diameter 12.7 mm/0.500 in)380 MPa55100 psi
Elongation at break (@diameter 12.7 mm/0.500 in)13%13%
Elastic modulus69.6 GPa10100 ksi
Shear strength255 MPa37000 psi
Hardness, Brinell (@load 500 kg; thickness 10.0 mm/1100 lb;0.394 in)133133
Hardness, Knoop (converted from Brinell hardness value)167167
Hardness, Rockwell A (converted from Brinell hardness value)5050
Hardness, Rockwell B (converted from brinell hardness value)8181
Hardness, Vickers (converted from Brinell hardness value)153153


Additional Information:

  • Item Code: AluminiumAlloys7039_D74S_74530_Pipe_Tube
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 6201 64401 - Forged Block
Interested in this product?
Get Best Quote

Aluminum Alloys 6201 64401 - Forged Block

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Dimensions (l x b x h)5 TO 500MM
Weight50 TO 500Kg
Green3200

Introduction

Aluminum alloys are known for their strong corrosion resistance. They are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). However, the strength of Aluminium / Aluminum alloys can be enhanced at subzero temperatures, thus making them perfect low-temperature alloys.

Aluminium / Aluminum 6201 alloy is a wrought alloy type. The following datasheet will provide more details about Aluminium / Aluminum 6201 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6201 alloy.

ElementContent (%)
Aluminum, Al98.5
Magnesium, Mg0.80
Silicon, Si0.70
Physical Properties

The physical properties of Aluminium / Aluminum 6201 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939-0.1011 lb/in³
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6201 alloy are tabulated below.

PropertiesMetricImperial
Elastic modulus70-80 GPa10152-11603 ksi
Poisson’s ratio0.330.33


Additional Information:

  • Item Code: AluminumAlloys620164401ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 6005 62400 C51S - Wire
Interested in this product?
Get Best Quote

Aluminium Alloys 6005 62400 C51S - Wire

Rs 650 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Black5000

Aluminium alloy 6005i s a medium strength, heat treatable alloy with excellent corrosion resistance.

Alloy 6005 has properties between those of alloys 6061 and 6082 and can sometimes be used interchangeably with these alloys but 6005/6005A has better extrusion characteristics. It has a better mill surface finish, but it is difficult to produce thin-wall complicated shapes in 6005/6005A.

6005 has very good bending properties.

Chemical Composition

Table 1. Chemical composition for aluminium alloy 6005

Element

% Present

Si

0.5-0.9

Fe

0.0-0.35

Cu

0.0-0.3

Mn

0.0-0.5

Mg

0.4-0.7

Zn

0.0-0.2

Ti

0.0-0.1

Cr

0.0-0.3

Mn+Cr

0.12-0.5

Al

Balance

Properties

Mechanical Properties

Table 2 (a). Mechanical properties for aluminium alloy 6005 T6

BS EN 755-2:2008
Rod Bar
up to 25mm Dia. A/F

Property

Value

Proof Stress

225 Min MPa

Tensile Strength

270 Min MPa

Elongation A50 mm

8 %

Shear Strength

205 MPa

Hardness Brinell

90 HB

Elongation A

10 Min %



Additional Information:

  • Item Code: AluminiumAlloys_6005_62400_C51S-Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 6066 64423 H11 C62S - Round Bar
Interested in this product?
Get Best Quote

Aluminum Alloys 6066 64423 H11 C62S - Round Bar

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Dimensions (l x b x h)5 TO 500MM
Weight50 TO 500Kg
Black4000

Introduction

Aluminium / Aluminum alloys have good corrosion resistance. They tend to lose some of their strength when subjected to high temperatures. However, their strength can be increased when exposed to subzero temperatures.

The following datasheet gives an overview of Aluminium / Aluminum 6066 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6066 alloy.

ElementContent (%)
Aluminium / Aluminum, Al95.7
Silicon, Si1.40
Magnesium, Mg1.10
Copper, Cu1
Manganese, Mn0.8
Physical Properties
PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939- 0.101 lb/in3
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6066 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength150 MPa21755 psi
Yield strength83 MPa12038 psi
Shear strength97 MPa14069 psi
Fatigue strength110 MPa15954 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Hardness4343


Additional Information:

  • Item Code: AluminumAlloys_6066_64423_H11_C62S-RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 7039 D74S 74530 - Wire
Interested in this product?
Get Best Quote

Aluminium Alloys 7039 D74S 74530 - Wire

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Green5200

Introduction

Aluminium / aluminum is one of the lightest available commercial metals with a density approximately one-third that of steel or copper. It can be easily fabricated into many forms such as foil, sheets, rod, tube, geometric shapes, and wire.

Aluminium / aluminum 7039 alloy is a heat treatable wrought alloy. The following datasheet will provide more details about aluminium / aluminum 7039 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 7039 alloy.

ElementContent (%)
Zinc, Zn3.5 - 4.5
Magnesium, Mg2.3 - 3.3
Silicon, Si0.3 max
Iron, Fe0.4 max
Chromium, Cr0.15 - 0.25
Manganese, Mn0.1 - 0.4
Copper, Cu0.1 max
Titanium, Ti0.1 max
Remainder (total)0.15 max
Aluminum, AlRemainder
Physical Properties

The physical properties of aluminium / aluminum 7039 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.74 g/cm³0.0990 lb/in³
Melting point482-638°C900-1180 °F
Mechanical Properties

The mechanical properties of aluminium / aluminum 7039-T64 alloy are tabulated below.

Wire Gauge (SWG): 8 SWG, 10 SWG, 20 SWG, 30 SWG ,32 SWG

Certification : BS , DIN ,IEC, NFC, CSA

 

PropertiesMetricImperial
Tensile strength (@diameter 12.7 mm/0.500 in)450 MPa65300 psi
Yield strength (@diameter 12.7 mm/0.500 in)380 MPa55100 psi
Elongation at break (@diameter 12.7 mm/0.500 in)13%13%
Elastic modulus69.6 GPa10100 ksi
Shear strength255 MPa37000 psi
Hardness, Brinell (@load 500 kg; thickness 10.0 mm/1100 lb;0.394 in)133133
Hardness, Knoop (converted from Brinell hardness value)167167
Hardness, Rockwell A (converted from Brinell hardness value)5050
Hardness, Rockwell B (converted from brinell hardness value)8181
Hardness, Vickers (converted from Brinell hardness value)153153


Additional Information:

  • Item Code: AluminiumAlloys_7039_D74S_74530-Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 6201 64401 - Wire
Interested in this product?
Get Best Quote

Aluminum Alloys 6201 64401 - Wire

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Red5300

Introduction

Aluminum alloys are known for their strong corrosion resistance. They are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). However, the strength of Aluminium / Aluminum alloys can be enhanced at subzero temperatures, thus making them perfect low-temperature alloys.

Aluminium / Aluminum 6201 alloy is a wrought alloy type. The following datasheet will provide more details about Aluminium / Aluminum 6201 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6201 alloy.

ElementContent (%)
Aluminum, Al98.5
Magnesium, Mg0.80
Silicon, Si0.70
Physical Properties

The physical properties of Aluminium / Aluminum 6201 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939-0.1011 lb/in³
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6201 alloy are tabulated below.

PropertiesMetricImperial
Elastic modulus70-80 GPa10152-11603 ksi
Poisson’s ratio0.330.33


Additional Information:

  • Item Code: Aluminum_Alloys-6201_64401_Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 7020 - Wire
Interested in this product?
Get Best Quote

Aluminium Alloys 7020 - Wire

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Red5000

Introduction

The principal alloying ingredients in aluminium / aluminum alloys include manganese, magnesium, copper, zinc and silicon. The market for aluminium / aluminum and its alloys is huge. About 22 million t is newly manufactured aluminium and 7 million t is recycled aluminium scrap.

Aluminium / aluminum 7020 alloy is a heat treatable wrought alloy. Zinc forms a major part of this alloy.

The following datasheet will provide more details about aluminium / aluminum 7020 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 7020 alloy.

ElementContent (%)
Zinc, Zn4-5
Magnesium, Mg1-1.40
Zirconium, Zr + Titanium, Ti0.80 - 0.25
Iron, Fe0.4
Silicon, Si0.35
Copper, Cu0.2
Chromium, Cr0.10 - 0.35
Zirconium, Zr0.080 - 0.20
Manganese, Mn0.050 - 0.50
Other (each)0.05 max
Other (total)0.15 max
Aluminum, AlRemainder
Physical Properties

The physical properties of aluminium / aluminum 7020 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.78 g/cm³0.100 lb/in³
Mechanical Properties

The mechanical properties of aluminium / aluminum 7020-T6 alloy are tabulated below.

 

Wire Gauge (SWG):8 SWG, 10 SWG, 20 SWG , 30 SWG ,32 SWG

Certification :BS, DIN ,IEC, NFC ,CSA

 

PropertiesMetricImperial
Tensile strength (@thickness ≤100 mm/≤3.94 in)≥ 350 MPa≥ 50800 psi
Yield strength (@thickness ≤100 mm/≤3.94 in)≥ 280 MPa≥ 40600 psi
Elongation at break (@thickness ≤100 mm/≤3.94 in)≥ 10%≥ 10%


Additional Information:

  • Item Code: AluminiumAlloys_7020-Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 6101 63401 91E D50S E.Al.Mg.Si 0.5 - Wire
Interested in this product?
Get Best Quote

Aluminum Alloys 6101 63401 91E D50S E.Al.Mg.Si 0.5 - Wire

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Green6500

Introduction

Aluminium / Aluminum alloys have good corrosion resistance. The strength of these alloys can be reduced when they are exposed to high temperatures. However, their strength can be increased at subzero temperatures. Aluminium / Aluminum 6101 alloy has good mechanical strength and high electrical conductivity.

The following datasheet will discuss in detail about Aluminium / Aluminum 6101 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6101 alloy.

ElementContent (%)
Aluminium / Aluminum, Al98.9
Magnesium, Mg0.60
Silicon, Si0.50
Physical Properties

The physical properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesMetricImperial
Density2.7 g/cm30.0975 lb/in3
Melting point588°C1090°F
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6101 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength97 MPa14069 psi
Yield strength76 MPa11023 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Thermal Properties

The thermal properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesConditions
T (ºC)Treatment
Thermal expansion23 (10-6/ºC)20-100-
Thermal conductivity218 W/mK25T6


Additional Information:

  • Item Code: AluminumAlloys_6101-Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 6066 64423 H11 C62S - Wire
Interested in this product?
Get Best Quote

Aluminium Alloys 6066 64423 H11 C62S - Wire

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Red5600

 

Introduction

Aluminium / Aluminum alloys have good corrosion resistance. They tend to lose some of their strength when subjected to high temperatures. However, their strength can be increased when exposed to subzero temperatures.

The following datasheet gives an overview of Aluminium / Aluminum 6066 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6066 alloy.

Element

Content (%)

Aluminium / Aluminum, Al

95.7

Silicon, Si

1.40

Magnesium, Mg

1.10

Copper, Cu

1

Manganese, Mn

0.8

Physical Properties

Properties

Metric

Imperial

Density

2.6-2.8 g/cm3

0.0939- 0.101 lb/in3

Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6066 alloy are outlined in the following table.

Properties

Metric

Imperial

Tensile strength

150 MPa

21755 psi

Yield strength

83 MPa

12038 psi

Shear strength

97 MPa

14069 psi

Fatigue strength

110 MPa

15954 psi

Elastic modulus

70-80 GPa

10153-11603 ksi

Poisson's ratio

0.33

0.33

Hardness

43

43

Wire Gauge (SWG):8 SWG, 10 SWG, 20 SWG, 30 SWG, 32 SWG

Certification:BS ,DIN ,IEC, NFC, CSA

 

 



Additional Information:

  • Item Code: AluminiumAlloys_6066_64423_H11_C62S-Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 6063 63400 H9 Al-Mg-Si 0.5 - Forged Block
Interested in this product?
Get Best Quote

Aluminum Alloys 6063 63400 H9 Al-Mg-Si 0.5 - Forged Block

Rs 850 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

BrandIMPORTED
Size5 TO 500MM
Black4000

Background

Aluminium alloy 6063 is a medium strength alloy commonly referred to as an architectural alloy. It is normally used in intricate extrusions.

 

 

It has a good surface finish, high corrosion resistance, is readily suited to welding and can be easily anodised. Most commonly available as T6 temper, in the T4 condition it has good formability.

Applications of 6063 Aluminium

Aluminium alloy 6063 is used in:

  • Architectural applications
  • Extrusions
  • Window frames
  • Doors
  • Shop fittings
  • Irrigation tubing

In balustrading the rails and posts are normally in the T6 temper and formed elbows and bends are T4. T4 temper 6063 aluminium is also finding applications in hydroformed tube for chassis.

Alloy Designations

Aluminium alloy 6063/6063A also corresponds to the following standard designations and specifications:

  • AA6063
  • Al Mg0.7Si
  • GS10
  • AlMgSi0.5
  • A-GS
  • 3.32206
  • ASTM B210
  • ASTM B221
  • ASTM B241 (Pipe- Seamless)
  • ASTM B345 (Pipe- Seamless)
  • ASTM B361
  • ASTM B429
  • ASTM B483
  • ASTM B491
  • MIL G-18014
  • MIL G-18015
  • MIL P-25995
  • MIL W-85
  • QQ A-200/9
  • SAE J454
  • UNS A96063
  • HE19
Chemical Composition of 6063/6063A Aluminium

Table 1. Chemical composition for aluminium alloy 6063 and 6063A

Element6063 % Present6063A % Present
Si0.2 to 0.60.3 to 0.6
Fe0.0 to 0.350.15 to 0.35
Cu0.0 to 0.10.1
Mn0.0 to 0.10.15
Mg0.45 to 0.90.6 to 0.9
Zn0.0 to 0.10.0 to 0.15
Ti0.0 to 0.10.1
Cr0.1 max0.05
AlBalanceBalance
Tempers for 6063 Aluminium

The most common tempers for 6063 aluminium are:

  • Annealed wrought alloy
  • T4 – Solution heat treated and naturally aged
  • T6 – Solution heat treated and artificially aged


Additional Information:

  • Item Code: AluminumAlloys606363400ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 8011 40800 Al-Fe-Si - Pipe/Tube
Interested in this product?
Get Best Quote

Aluminum Alloys 8011 40800 Al-Fe-Si - Pipe/Tube

Get Latest Price

Minimum Order Quantity: 50 Kilogram

Size1, 2, 4, 3, 1.5
ShapeRectangular, Square, Round, Oval
Unit Length18 m, 6 m, 24m, 12 m
Surface FinishAnodized, Brushed, Mill Finished, Finished Polished
Blue3700

Introduction

Apart from iron, aluminium / aluminum is currently the next most widely used metal in the world. This is due to the fact that aluminium / aluminum has a unique combination of attractive properties. Properties such as its low weight, corrosion resistance, and easy maintenance of final product, have ensured that this metal and its alloys will be in use for a very long time.

Aluminium / aluminum 8011 alloy is a wrought alloy. The following datasheet will provide more details about aluminium / aluminum 8011 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 8011 alloy.

ElementContent (%)
Aluminum, Al97.3 - 98.9
Iron, Fe0.60 - 1
Silicon, Si0.50 - 0.90
Manganese, Mn≤ 0.20
Zinc, Zn≤ 0.10
Copper, Cu≤ 0.10
Titanium, Ti≤ 0.080
Chromium, Cr≤ 0.050
Magnesium, Mg≤ 0.050
Remainder (each)≤ 0.050
Remainder (total)≤ 0.15


Additional Information:

  • Item Code: Aluminum_Alloys_8011_40800_Al-Fe-Si-Pipe-Tube
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminum Alloys 6066 64423 H11 C62S - Pipe/Tube
Interested in this product?
Get Best Quote

Aluminum Alloys 6066 64423 H11 C62S - Pipe/Tube

Get Latest Price

Minimum Order Quantity: 50 Kilogram

ShapeOval, Square, Round, Rectangular
Size2, 1, 3, 1.5, 4
Unit Length18 m, 12 m, 6 m, 24m
Surface FinishBrushed, Mill Finished, Finished Polished, Anodized
Red4000

Introduction

Aluminium / Aluminum alloys have good corrosion resistance. They tend to lose some of their strength when subjected to high temperatures. However, their strength can be increased when exposed to subzero temperatures.

The following datasheet gives an overview of Aluminium / Aluminum 6066 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6066 alloy.

ElementContent (%)
Aluminium / Aluminum, Al95.7
Silicon, Si1.40
Magnesium, Mg1.10
Copper, Cu1
Manganese, Mn0.8
Physical Properties
PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939- 0.101 lb/in3
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6066 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength150 MPa21755 psi
Yield strength83 MPa12038 psi
Shear strength97 MPa14069 psi
Fatigue strength110 MPa15954 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Hardness4343


Additional Information:

  • Item Code: AluminumAlloys_6066_64423_H11_C62S-Pipe-Tube
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Aluminium Alloys 6201 64401 - Pipe/Tube
Interested in this product?
Get Best Quote

Aluminium Alloys 6201 64401 - Pipe/Tube

Get Latest Price

Minimum Order Quantity: 50 Kilogram

Size1.5, 1, 4, 3, 2
ShapeOval, Round, Square, Rectangular
Unit Length18 m, 6 m, 12 m, 24m
Surface FinishFinished Polished, Mill Finished, Anodized, Brushed
Green3600

Introduction

Aluminum alloys are known for their strong corrosion resistance. They are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). However, the strength of Aluminium / Aluminum alloys can be enhanced at subzero temperatures, thus making them perfect low-temperature alloys.

Aluminium / Aluminum 6201 alloy is a wrought alloy type. The following datasheet will provide more details about Aluminium / Aluminum 6201 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6201 alloy.

ElementContent (%)
Aluminum, Al98.5
Magnesium, Mg0.80
Silicon, Si0.70
Physical Properties

The physical properties of Aluminium / Aluminum 6201 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939-0.1011 lb/in³
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6201 alloy are tabulated below.

PropertiesMetricImperial
Elastic modulus70-80 GPa10152-11603 ksi
Poisson’s ratio0.330.33


Additional Information:

  • Item Code: AluminiumAlloys_6201_64401_Pipe-Tube
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested
© FountainHead Alloys. All Rights Reserved (Terms of Use)