X
I agree to the terms and privacy policy

FountainHead Alloys

Mumbai, Maharashtra

| GST  27AKOPC9787G1ZI

| TrustSEAL Verified

View Mobile Number 88% Response Rate

Home

> Our Products

> Monel Alloys

Monel Alloys

Providing you the best range of Monel K-500 UNS N05500 AMS 4676 Alloy K500 Wire, Round Bar and Monel 400 UNS NO4400 AMS 4675 Alloy 500, Wire, Round Bar with effective & timely delivery.

Monel K-500 UNS N05500 AMS 4676 Alloy K500 Wire, Round Bar
Interested in this product?
Get Best Quote

Monel K-500 UNS N05500 AMS 4676 Alloy K500 Wire, Round Bar

Rs 2,500 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

ApplicationIndustry, Heating system
TypeNickel Bar
Dimensions0.1-500mm

Type Analysis

Element

Min

Max

Carbon

--

0.25

Nickel + Cobalt

63.0 min

Titanium

0.35

0.85

Copper

27.0

33.0

Iron

--

2.00

Silicon

--

0.50

Manganese

--

1.50

Sulfur

--

0.01

Titanium

0.35

0.85

Aluminum

2.30

3.15

Description

Monel nickel-copper alloy K-500 combines the excellent corrosion resistance characteristic of Monel alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanimum to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated thoughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging.

Application

Typical applications for alloy K-500 are pump shafts and impellers; doctor blades and scrapers; oil-well drill collars and instruments; electronic components; springs; and valve trim.

Corrosion Resistance

The corrosion resistance of Monel alloy K-500 is subtantially equivalent to that of alloy 400 except that, when in the age-hardened condition, alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments. Monel alloy K-500 has been found to be resistant to a sour-gas environment. After 6 days of continuous immersion in saturated (3500ppm) hydrogen sulfide solutions at acidic and basic pH's (ranging from 1.0 to 11.0), U-bend specimens of age-hardened sheet show no cracking. There was some tightly adherent black scale. Hardness of the specimens ranged from 28 to 40 Rc.
The combination of very low corrosion rates in high-velocity sea water and high strength make alloy K-500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting, but this pitting slows down after a fairly rapid initial attack.

Physical PropertiesDensity, lb/cu in.......................................................................... 0.3054 gram/cc............................................................................ 8.434 Melting Range, °F............................................................... 2400-2460 Modulus of Elasticity, 10(6) psi, Tension..................................... 26.0 Torsion....................................... 9.5 Poisson's Ration............................................................................ 0.32

 

Black:4000

Brand:IMPORTED

Size/Diameter:1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch

Single Piece Length :3 meter , 6 meter ,18 meter, 36 meter, >36 meter

Usage: Manufacturing, Construction ,Household Repair

 

 



Additional Information:

  • Item Code: Monel_k500_UNSN05500_AMS4676_Alloyk500
  • Pay Mode Terms: L/C (Letter of Credit),D/A,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested

Monel 400 UNS NO4400 AMS 4675 Alloy 500, Wire, Round Bar
Interested in this product?
Get Best Quote

Monel 400 UNS NO4400 AMS 4675 Alloy 500, Wire, Round Bar

Rs 2,500 / KilogramGet Latest Price

Minimum Order Quantity: 50 Kilogram

Special UseValve Steels,Cold Heading
ShapeRound
Grade300 Series

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

In what forms is Monel 400 Available at Mega Mex?

  • Sheet
  • Plate
  • Bar
  • Pipe Tube (welded seamless)
  • Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
  • Wire

What are the characteristics of Monel 400?

  • Resistant to seawater and steam at high temperatures
  • Excellent resistance to rapidly flowing brackish water or seawater
  • Excellent resistance to stress corrosion cracking in most freshwaters
  • Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
  • Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
  • Excellent resistance to neutral and alkaline salt
  • Resistance to chloride induced stress corrosion cracking
  • Good mechanical properties from sub-zero temperatures up to 1020° F
  • High resistance to alkalis

MONEL Alloy 400

Nickel (plus Cobalt) .................................63.0 min. Carbon...................................................0.3 max. Manganese..............................................2.0 max. Iron........................................................2.5 max. Sulfur......................................................0.024 max. Silicon.....................................................0.5 max. Copper.......................... .........................28.0 - 34.0

 

Application: Drinking Water, Utilities Water , Chemical Handling, Gas Handling, Food Products

 

Yellow:6500

Brand:IMPORT

Size/Diameter :1/2 inch, 1 inch , 2 inch ,3 inch ,4 inch, >4 inch

Single Piece Length: 3 meter ,6 meter ,18 meter ,36 meter, >36 meter

Usage : Manufacturing ,Construction , Household Repair



Additional Information:

  • Item Code: Monel400_UNSNO4400_AMS4675_Alloy500
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..

View Complete Details

Yes I'm interested
© FountainHead Alloys. All Rights Reserved (Terms of Use)