Galaxy Instruments India

Keeping in mind the varied requirements of our clientele, we are occupied in providing an extensive series of AC Digital Clamp Meter.
Features:
Tear-drop-shaped jaws for ease of use in crowded cade areas and other tight places.
Provides a wide measuring range from 0 up to 2000A AC.
Terminal cover to avoid the use of incorrect terminal.
PEAK funoon to measure current peak.
Output terminal for long term current monitoring.
Safety design throughout conforming to the following provisions of IEC61010. Pollution degree 2, overvoltage category IT 600V Pollution degree 2, overvoltage category 1000V
Data hold function to allow easy readings in dimly or hard-to-read locations.
Sleep function to conserve battery power.
Permits easy continuity check with a beeper.
Provides a dynamic range of 4,000 counts .11 scale.
Wide frequency range from 40Hz to IkHz.
Transformer jaws fitted with guards to further improve safety.

• Large Lcd For Easy Reading.
• Data Hold Switch Freezes Reading.
• Low Battery Indication.
• Continuity Buzzer.
• Tough Abs Plastic Housing.
• Diode Check
• Accessories Test Leads, Carrying Case, Manual

Additional Information:

• Item Code: 2700

• True-rms AC/DC current, voltage, temperature, frequency
• Clamp meter, test leads, K-type thermocouple and soft case
• Versatile tool performs most front-line measurement tasks

Additional Information:

• Packaging Details: test lead, manual, carrying case

With years of experience of this industry, we are providing a wide series of AC and DC Digital Clamp Meter.

Features:

Tear-drop-shaped jaws for ease of use in crowded code areas and other tight places.

Provides a wide measuring range from 0 up to 2000A AC.

Terminal cover to avoid the use of incorrect terminal.

PEAK funoon to measure current peak.

Output terminal for long term current monitoring.

Safety design throughout conforming to the following provisions of IEC61010. Pollution degree 2, over voltage category IT 600V Pollution degree 2, overvoltage category 1000V

Data hold function to allow easy readings in dimly or hard-to-read locations.

Sleep function to conserve battery power.

Permits easy continuity check with a beeper.

Provides a dynamic range of 4,000 counts .11 scale.

Wide frequency range from 40Hz to IkHz.

Transformer jaws fitted with guards to further improve safety.

• Large 27mrn. LCD Display.
• ACAJDCA measurement up to999.9A
• Synchronous measurement of Inrush current (10OrnS), for measuring the true starting current for motors, lighting, breaker, etc.
• With Unique Inrush Current Measurement
• Auto shut-off maximizes battery life
• Dimensions of conductor: 0 46.5mrn
• Ohm, Continuity, Capacitance and frequency input protection to 600 VDC/AC rms
• Good for PWM trouble shooting and in Noisy environment measurement
• Crest Factor : <=3
• EN61010-1 approval. Over-Voltage Category III 600V "H. key for HOLD function, moves into peak mode after 4
• seconds automatically
• Test leads, Manual, Carrying Case.

Additional Information:

• Item Code: 9999

Additional Information:

• Delivery Time: Ready
• Packaging Details: testo 770-3, TRMS clamp meter, including batteries and 1 set of measuring cables

• iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
• CAT IV 600 V, CAT III 1000 V
• True RMS AC voltage and current for accurate measurements on non-linear signals
• Min, max, average and Inrush recording to capture variations automatically
• Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
• Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
• Ergonomic design fits in your hand and can be used while wearing protective equipment
• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Three-year warranty
• Soft Carrying Case

Specifications: Fluke 362 Clamp Meter Range ResolutionAccuracy AC current 200A0.1A2%  5 digits (45-65Hz) 2.5%  5 digits (65-400Hz)DC current200A0.1A2%  5 digits AC voltage 600 V0.1 V1.5%  5 digits (45-400Hz)DC voltage600 V0.1 V1%  5 digitsResistance 300/30000.1/11%  5 digitsContinuity  General SpecificationsSize (LxWxH) mm205 × 60 × 22Clamp opening18 mmWeight196 gSafety ratingCAT III 600 VWarranty2  years

Being a customer centric firm, we are occupied in providing an extensive series of True RMS Digital Clamp Meter.Features: Large 27mrn. LCD Display.ACAJDCA measurement up to999.9ASynchronous measurement of Inrush current (10OrnS), for measuring the true starting current for motors, lighting, breaker, etc.With Unique Inrush Current MeasurementAuto shut-off maximizes battery lifeDimensions of conductor: 0 46.5mrn Ohm, Continuity, Capacitance and frequency input protection to 600 VDC/AC rmsGood for PWM trouble shooting and in Noisy environment measurementCrest Factor : <=3EN61010-1 approval. Over-Voltage Category III 600V "H. key for HOLD function, moves into peak mode after 4seconds automaticallyTest leads, Manual, Carrying Case.