Steel Shots
Packaging Size | 1 kg |
Size | S 70 |
Machine Type | Table Type |
Usage/Application | Automobile Industry |
Usage | Blast Cleaning |
Steel Shots
Steel shots are spherical grains made of molten steel through an atomization (granulation) process; these cast steel shots are available in different sizes & hardness. Steel shots are manufactured from steel scrap. Our Steel Shot is exceptionally durable due to its low friability, the impact of blasting actually further tempers the shot so that its hardness increases over time, allowing the media to deliver consistent, repeatable performance over thousands of cycles. As produced, our Steel Shot has a hardness of 40-50HRC (390-510 H.V). And thanks to its extremely low breakdown rate, virtually no dust is produced.
All material is screened to meet or exceed IS, SAE & SFS SPECIFICATIONS.
Chemical & Physical properties, composition of steel shot:
Chemical Composition (%) | Cast Steel Shot |
| ||
Carbon | 0.85 - 1.20 | |||
Manganese | 0.60 - 1.20 | |||
Silicon | 0.40 - 1.20 | |||
Sulfur | 0.05 max. | |||
Phosphorous | 0.05 max. | |||
Typical Physical Properties | Steel Shot | |||
Hardness | 40-50 HRC (390-510 H.V_ | 42-50 HRC
(540-640 H.V) | 56-60 HRC (640-740 H.V) |
|
Hardness Deviation | Maximum deviation ±3.0HRC | |||
Micro structure | Finely tempered Martensite | |||
Minimum Density | 7.4 g/CC | |||
Appearance & Odor | Spherical – No Odor | |||
Durability | 2000 – 3000 cycles |
Steel shot blasting is the most widely used process in sand & shot blasting industries for cleaning, stripping and improving a metal surface. The size of steel shot will determine the finish achieved on the surface of the metal. Both air powered and wheel blast machine can be used to accelerate the steel shot onto the surface of the part. Due to the hardness and density of steel shot, it can be recycled as much as 3000 times before replacement. Since steel shot does not use an abrasives process, a minimal amount of dust is created in the blasting process.Cast steel shots are essentially used to clean metal surfaces and parts like: De sanding and cleaning foundry castings,billets and profiles produced by the steel industry
View Complete Details
Packaging Size | 1 kg |
Size | S 70 |
Machine Type | Table Type |
Material | : steel |
Country of Origin | Made in India |
Cast Steel shots are spherical grains made of molten steel through an atomization process; these cast steel shots are available in different sizes & hardness.. Steel scrap is melted in the furnace then being atomized into shot by water jet.
Chemical & Physical properties, composition of steel shot:
Chemical Composition (%) | Cast Steel Shot | ||
Carbon | 0.85 - 1.20 | ||
Manganese | 0.60 - 1.20 | ||
Silicon | 0.40 - 1.20 | ||
Sulfur | 0.05 max. | ||
Phosphorous | 0.05 max. | ||
Typical Physical Properties | Steel Shot | ||
Hardness | 40-50 HRC | 42-50 HRC | 56-60 HRC |
Hardness Deviation | Maximum deviation ±3.0HRC | ||
Microstructure | Finely tempered Martensite | ||
Minimum Density | 7.4 g/CC | ||
Appearance & Odor | Spherical – No Odor | ||
Durability | 2000 – 3000 cycles |
Cast Steel shot blasting is the most widely used process in sand & shot blasting industries for cleaning, stripping and improving a metal surface. The grade or size of steel shot will determine the finish achieved on the surface of the metal.
Smaller steel shot will result in a smoother and more polished surface. Larger steel shot will clean more aggressively but produce a rougher surface. Due to the hardness and density of steel shot, it can be recycled as much as 3000 times before replacement.
Steel Shots Grades, Sizes, Finishes and Applications | ||
Shot Grade | Finish | Applications |
S-70 | Fine, smooth shot finish. Excellent coverage. | Blasting of relatively small ferrous and non-ferrous castings. Removal of light scale from foreign and heat treated parts. Blasting of machined parts. Removal mill scale, rust and other deposits. |
S-110 | ||
S-170 | ||
S-230 | Medium, light shot finish. Good coverage. | Blasting of grey iron, malleable iron, light steel castings, medium forgings, heat-treated parts and heavy mill scale - rust and other deposits. |
S-280 | ||
S-330 | ||
S-390 | Average to heavy shot finish. Average coverage. | Blasting of steel, heavy malleable iron and grey iron castings. Removal of scale from large billets, slabs - rust and other deposits. |
S-460 | ||
S-550 | ||
S-660 S-780 | Rough coverage. Adequate for most applications. | Heavy steel castings. Removal of tough, heavy scale. |
Our cast steel shot continue to find broad and growing applications in diverse markets such as automotive, aerospace, agricultur,foundry, mining, railroad, shipyard, stone cutting etc
- Abrasive Grain Sizes: S70,S110,S170,S230,S280,S330,S390,S460,S550,S660,S780,S930
- Usage: Blasting
- Material: steel
Additional Information:
- Delivery Time: Within 7 days
- Packaging Details: Cast Steel Shot come in packing of 25kg bags,40 bags of 1 wooden pallet of 1 M.T Packing can also be made according to customer requirement
View Complete Details
- Developed and Managed by IndiaMART InterMESH Limited