G D Components

Arduino Model	Arduino UNO R3
No. Of Cores	32BIT
Bluetooth	NO
USB 2.0 Ports	1
Processor	96
Memory	76MB
Country of Origin	Made in India

Arduino Uno is a microcontroller board based on the Atmega 328PIt has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1 day

Memory	75kb
Processor	785
USB 2.0 Ports	Micro to 2.0
Bluetooth	NO
Model Name/Number	HGUIF
Brand	Arduino

The Arduino Pro Mini is a microcontroller board based on the ATmega328. 
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini. There are two version of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz.  The Arduino Pro Mini was designed and is manufactured by SparkFun Electronics. You can find here your board warranty informations.

Memory	676
Processor	74M
USB 2.0 Ports	2
Bluetooth	YES
No. Of Cores	4
Country of Origin	Made in India

Other Detail:

• You could download the driver of Elegoo Nano V3.0
• The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
• It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
• Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
• The Nano can be powered via the Mini-B USB connection, unregulated external power supply (pin 30), or regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

Additional Information:

• Item Code: 5421
• Production Capacity: 100
• Delivery Time: READY

Usage/Application	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Model Name/Number	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Brand	Nodemcu
Dimension	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Material	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Power Consumption In Sleep Mode	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Version Firmware	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Advanced Security	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Humidity	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Included Component	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Io Port Package	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Minimum Receiver Sensitivity	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t
Operating Temperature	Specifications 1.ses CH340G instead of CP2102. 2.Communication interface voltage 3.3V. 3.Antenna t

We are the leading suppliers for NodeMCU ESP-8266 WIFI Board CH340. NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board is a fast leading edge low-cost WiFi technology. Modern high-level mature LUA based technology. It is an integrated unit with all available resources on board. It is super simple to complement your existing Arduino projects or any development board that has I/O pins available.

Additional Information:

• Item Code: READY
• Production Capacity: READY
• Delivery Time: REDY
• Packaging Details: Specifications: 1.ses CH340G instead of CP2102. 2.Communication interface voltage: 3.3V. 3.Antenna type: Built-in PCB antenna is available. 4.Wireless 802.11 b/g/n standard 5.WiFi at 2.4GHz, support WPA / WPA2 security mode 6.Support STA/AP/STA + AP three operating modes 7.Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX) 8.D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA 9.AD0: 1 channel ADC 10.Power input: 4.5V ~ 9V (10VMAX), USB-powered 11.Transfer rate: 110-460800bps 12.Support UART / GPIO data communication interface 13.Remote firmware upgrade (OTA) 14.Support Smart Link Smart Networking 15.Working temperature: -40 ~ + 125 16.Drive Type: Dual high-power H-bridge driver 17.ESP8266 has IO Pin 18.Don¿¿¿t need to download resetting 19.A great set of tools to develop ESP8266 20.Flash size: 4MByte 21.Lowest cost WI-FI 22.FOR Arduino like hardware IO 23.Greatly speed up your IOT application developing process 24.Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled 25.WI-FI MCU ESP8266 integrated and easy to prototyping development kit.

Usage/Application	PROGRAMMABLE
Model Name/Number	ESP8266
Brand	Nodemcu
Connectivity	WIFI
Dimension	5MM
Material	PLASTIC
Power Consumption In Sleep Mode	3.5V
Version Firmware	TY
Advanced Security	YES
Humidity	YES
Included Component	YES
Io Port Package	DRIVE TYPE
Minimum Receiver Sensitivity	100
Operating Temperature	45-125
Temperature	45
Wireless Criteria	WIFI
Wireless Network Mode	YES
Features	LOW COST
Country of Origin	Made in India

NodeMCU Lua ESP8266 ESP-12E Module with CH340 wifi modular nodemjdmdmxx                                                                          

Additional Information:

• Item Code: 46
• Production Capacity: 100
• Delivery Time: READY
• Packaging Details: READY

Memory	87M
USB 2.0 Ports	1
Bluetooth	NO
No. Of Cores	5
Graphics GPU	2
Country of Origin	Made in India

Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Uno R3 is of high-grade acrylic, which provides excellent protection. This is unique design provides an easy connection to other components. The dimension of the enclosure box is the same as the original Arduino Uno R3. Note: The UNO R3 module is not included.

Memory	87KB
Processor	875
USB 2.0 Ports	1
Bluetooth	NO
No. Of Cores	5
Country of Origin	Made in India

The LilyPad 328 ATmega328P Main Board 16M is an Arduino-program micro-controller design to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package design to minimize snagging and profile. With wide tabs that can be sewn down and connect with conductive thread.

The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch). Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!.

 

Features :

• The latest version of the LilyPad supports automatic reset for even easier programming.
• The back side of the LilyPad is now completely flat!
• We now use a surface mount programming connector to keep the header from poking through.
• This version of the LilyPad now uses the new ATmega328 at 8MHz.
• Use this setting when using this new LilyPad 328.

Package Includes:

• 1 x LilyPad 328 ATmega328P Main Board 16M

Memory	45KB
Processor	4
USB 2.0 Ports	1
Bluetooth	NO
No. Of Cores	4
Country of Origin	Made in India

The Nano 328P Expansion Adapter Breakout Board IO Shield acts as a breakout board for the Arduino Nano microcontroller. There are several different options for power input and the footprint of this board is the same as the Arduino Duemilanove.

Memory	34KB
Processor	45MB
USB 2.0 Ports	1
Bluetooth	NO
No. Of Cores	4
Country of Origin	Made in India

Based on Avia Semiconductor's patented technology, HX711 is a precision 24-bit analogto-digital converter (ADC) designed for weigh scales and industrial control applications to interface directly with a bridge sensor. The input multiplexer selects either Channel A or B differential input to the low-noise programmable gain amplifier (PGA). Channel A can be programmed with a gain of 128 or 64, corresponding to a full-scale differential input voltage of +-20mV or +-40mV respectively, when a 5V supply is connected to AVDD analog power supply pin. Channel B has a fixed gain of 32. Onchip power supply regulator eliminates the need for an external supply regulator to provide analog power for the ADC and the sensor. Clock input is flexible. It can be from an external clock source, a crystal, or the on-chip oscillator that does not require any external component. On-chip poweron-reset circuitry simplifies digital interface initialization. There is no programming needed for the internal registers. All controls to the HX711 are through the pins. 

Additional Information:

• Item Code: 3949
• Production Capacity: 100
• Delivery Time: READY

No. Of Cores	3
Model Name/Number	i2c module PCF8591
Bluetooth	NO
Processor	87
Country of Origin	Made in India

The PCF8591 is a single-chip, single-supply low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. ... Address, control and data to and from the device are transferred serially via the two-line bidirectional I2C-bus.27-Jun-2013

Model Name/Number	ATTINY85
No. Of Cores	2
Ethernet	NO
Minimum Line Spacing	0.085 kg
Length	26 mm
Width	18 mm

The ATtiny85 Breakout board is the smallest Arduino Compatible board! It measures less that 1 square inch and has an onboard microUSB port! With 6 I/O pins an onboard voltage regulator and 3 Power Pins, this is a super awesome way to get Arduino based projects into the tiniest of places!