Girish Radio Corporation

• Quality Construction - Molded connectors, rugged jacket, and gold plated connectors are used for outstanding performance and long life.
• Compatibility - HDMI and DVI are often adapted to one another since they share the same TMDS system for video transmission. Note that any audio present in an HDMI signal will belost when adapted to DVI. Always verify compatibility details for the source/destination in your application.

• Fine finish
• Consistent performance
• Precisely designed

Details:

• DVI-I (F) to HDMI (M)
• Kramer’s ADC-DF/HM is a short cable, approx 1ft in length, designed to adapt a DVI cable to a device with an HDMI input, or to adapt from an HDMI source to a DVI cable.
• Quality Construction - Molded connectors, rugged jacket, and gold plated connectors are used for outstanding performance and long life.
• Compatibility - HDMI and DVI are often adapted to one another since they share the same TMDS system for video transmission
• Note that if the source is HDMI the audio signal will be lost since DVI does not support audio. Always verify compatibility details for the source/destination in your application.

Additional Information:

• Item Code: ADC-DF-HM

• DisplayPort (M) to DVI−I (F)
• Requires DP++ Devices
• Adapter Cable − 1ft (0.3m)
• Compatibility - Requires a dual−mode DisplayPort device that implements both DVI and DisplayPort signals. These devices are usually identified with the DP++ logo.

Additional Information:

• Item Code: AD-RF-RF
• Pay Mode Terms: T/T (Bank Transfer)

Additional Information:

• Item Code: AD-BM-2BFT

The patented rear TWIST boot guarantees easy access even in high density applications and offers color coding.

Suitable cables:
Argosy Image 720, Belden 1505A (ANH), Belden 8241F, Canare L-4CFB, Clark Wire CD7559-0, Clark Wire CD7559F-0, Comm Scope 5565, Draka 0.8/3.7 AF, Draka 755-801, Draka 755-803, Draka 755-804, Gepco VPM2000, Proel HPC 810, Suhner S0426, Sommer 600-0451, Sommer 600-162(F), Percon VK6

• “rear TWIST Principle” locking/unlocking using the easily accessible soft touch boot (Patent DE 100 48507)
• Ideal for recessed bulkheads where access to the “head” of the connector might be an issue. These connectors turn from the back and not the front.
• True 75 Ω design meets the stringent HDTV / DVD requirements
• Leading area: Avoids tilting due to side forces to protect contacts from deformation. Guarantees a lifetime of min. 1000 mating cycles!
• Snug-fit center pin insert provides tactile feedback
• Shield and jacket crimp technology prevents the problem of an exposed grounding braid on cable assemblies
• Excellent cable protection and retention
• Precise Swiss machined brass parts for outstanding durability
• Accessories include color coded boots in 10 standard colors, crimp tool and dies

• Premium gold plated shielded cable
• Supports maintaining signal integrity over full length
• Can also be made available in OEM configurations as demanded by the customers.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

• Allows for high speed digital data transmission for faster and stronger signals
• Support input/output of signal
• Vertical frequency range, video amplifier bandwidth.

Additional Information:

• Item Code: AD-GM-GM
• Pay Mode Terms: T/T (Bank Transfer)

• Compact design
• Sturdily constructed
• Lightweight & yet strong

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

DVI I (F) to DVI I (F) Flat Right Angled Gender Changer offered to provide for true plug & play support and comes with USB 2.0 certification that assures of high-speed data transfer rate of up to 480Mbps. Further, these chargers are also USB 2.0 and USB 1.1 compliant and comprise connections in form of Type USB A male to USB A female. Some of its features include premium gold plated shielded cable; supports maintaining signal integrity over full length; can also be made available in OEM configurations as demanded by the customers.

Additional Information:

• Item Code: AD-HF-HF-RA
• Pay Mode Terms: T/T (Bank Transfer)

• Compact design
• Sturdily constructed
• Light weight & yet strong

XLR FEMALE CONNECTOR
3 pole female cable connector with Nickel housing and silver contacts.

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief

• Unique cage design of female contact for low contact resistance and high integrity
• Female contact incorporates a solder barrier to prevent solder running into the contact mating area
• Female connector with improved solid metal latch which is larger and easier to handle
• Additional ground spring contacts for better shell ground continuity
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
• Boot with polyurethane gland gives high protection to cable bending stresses
• Colored rings and boots available for coding or identification
• Sleek and ergonomic design - valuable and handy
• Rugged zinc diecast shell, longlasting and dependable
• Internal thread on shell is well protected against any damage
• Branded with unique hologram - guarantees genuine and authentic Neutrik product

DVI I (F) to DVI I (F) Right Angled Gender Changer offeredprovide for true plug & play support and comes with USB 2.0 certification that assures of high speed data transfer rate of up to 480Mbps. Further, these chargers are also USB 2.0 and USB 1.1 compliant and comprises connections in form of Type USB A male to USB A female.

Features:

• Premium gold plated shielded cable
• Supports maintaining signal integrity over full length
• Can also be made available in OEM configurations as demanded by the customers.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

• Quality Construction - Molded connectors, rugged jacket, and gold plated connectors are used for outstanding performance and long life.
• Compatibility - Some DVI output cards are able to output both DVI−D (digital) and DVI−A (analog) either simultaneously or independently. This adapter provides access to both formats. Always verify compatibility details for the source/destination in your application.
• DVI−I (M) to DVI−D (F) + 15−pin HD (F)

3 pole male cable connector with Nickel housing and silver contacts.

• Male connector with improved locking recess without "window", more stringent housing increases durability
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
• Boot with polyurethane gland gives high protection to cable bending stresses
• Colored rings and boots available for coding or identification
• Sleek and ergonomic design - valuable and handy
• Rugged zinc diecast shell, longlasting and dependable
• Internal thread on shell is well protected against any damage
• Branded with unique hologram - guarantees genuine and authentic Neutrik product

• HDMI Tool Kit(With 50 Mtr Cable) Pc
• HDMI Connector(Crimp) Pc
• HDMI Metal shell Pc
• HDMI Cable(Compatible With Kit) Mtr
• HDMI Cable (For Long Lengths) Mtr
• HDMI Flat Cable Mtr
• Vga Cable (Projector) Blue 388 Mhz Mtr

• Compact design
• Sturdily constructed
• Light weight & yet strong
• HDMI (F) to HDMI (M)
• Right Angle Adapter
• Audio - E

• Compact design
• Sturdily constructed
• Light weight & yet strong

BNC Connector NBNC75BDD6
The rear TWIST HD BNC cable connector offers a true 75 Ω design and is perfectly suitable for HD applications.
The patented rearTWIST boot guarantees easy access even in high-density applications and offers color coding.

• “rearTWIST Principle” locking/unlocking using the easily accessible soft touch boot (Patent DE 100 48507)
• Ideal for recessed bulkheads where access to the “head” of the connector might be an issue. These connectors turn from the back and not the front.
• True 75 Ω design meets the stringent HDTV / DVD requirements
• Leading area: Avoids tilting due to side forces to protect contacts from deformation. Guarantees a lifetime of min. 1000 mating cycles!
• Snug-fit center pin insert provides tactile feedback
• Shield and jacket crimp technology prevents the problem of an exposed grounding braid on cable assemblies
• An excellent cable protection and retention
• Precise Swiss machined brass parts for outstanding durability
• Accessories include color-coded boots in 10 standard colors, crimp tool and dies

• Sturdiness
• Good flexibility
• Dimensional accuracy

• Cover - Manually opens & closes.
• Inner Frame - 6 different "TIAF" inner frame options are available that can accommodate a combination of up to 4 power sockets, 6 cable pass−through or connector inserts, 1 long insert and up to 3 Kramer TOOLS.
• Power Sockets - 8 different "TS" single and 8 dual power socket options are available to accommodate the power requirements worldwide.
• Power Cord - 8 different "C−AC" single power cords (and 3 "Y" power cords) for each power socket.
• Optional Accessories - TBUS Brackets, K−Able Box Cable Reels, Step−In Modules and Controllers are available.
• UL and CE Qualified.
• Connector Depth - Adjustable.