DAVCO K11 FLEX Davco K11 Flex is a flexible 2-part acrylic-modified cementitious waterproofing system. The 2-components of Davco K11 Flex react chemically after mixing to form a hard and elastic film which bonds tenaciously to most concrete or masonry substrate to protect against possible ingress of water. The application of Davco K11 Flex requires the surface to be saturated or wetted down prior to its application. This make Davco K11 Flex a practical and ideal product for waterproofing in damp conditions such as basement, wet areas and external areas of most sites where the surface has to be pre-washed prior to applying any waterproofing system. In external areas, application of Davco K11 Flex is not affected by change in weather conditions. Davco K11 Flex can receive direct plaster or screed without affecting bond. Marbles and tiles can be fixed directly onto Davco K11 Flex with most types of Davco adhesives. Davco K11 Flex can accommodate slight movement of structure and can be used as a repair material for bridging cracks in substrate or cracks due to shrinkage up to 2mm wash. USES Apply on internal and external surface of wall and slab, swimming pools, kitchens, toilets, balcony, water tanks. External areas parking deck, planter boxes, sealing precast joints and intersection of two concrete elements. Protection to lightweight blocks, hollow blocks, aerated blocks. Suitable Substrate Concrete Brickwork Precast Surface Lightweight Blocks Shotcrete ADVANTAGES 2 components eliminates risk of incorrect mixing ratio. Seals lightweight aerated blocks Seals precast joints Anti-carbonation protection Non-toxic Foot trafficable when cured Will not attack metal No protection require prior to fixing other types of finishes