Global Instruments Corporation

• Provides accurate test result
• Reliable
• Long lasting

• Excellent performance
• Ability to test accurately
• Longer service life

• High level of heatingUsed for the storage of sievesEasy operation

• Promising excellent performance
• Reliable performance
• Clear and easy surveying

• Easy to read graduations
• Large sized locking buttons
• Dimensionally accurate

Measuring Chain:-Available wide range of measuring chain to our customers as per their requirements and to the full satisfaction of them.

20 mtr.30 mtr(As per clint requirement)

• Used for determination of in-situ dry density of natural of compacted fine grained soil
• Used to extract a sample of the soil with the help of a dolley and rammer
• Spirit level are fitted dot the stand

• Highly sensitive spirit bubbles
• Screw focusing eye piece
• Impeccable finish

Learning Objectives/Experiments:

• To observe the phenomena of cavitation.
• To compare the theoretical and actual pressures at cavitation condition.

Required for Operation:

• Water supply : Initial fill.
• Floor drain required.
• Floor area required : 1. 5 m x 1 m.

Technical Specifications:

• Test section : material acrylic
• Pressure gauge : 0-4 kg/cm2
• Vacuum gauge : 0-760 mmhg
• Water circulation : by pump crompton make.
• Flow measurement : measuring tank (capacity : 40 liters)
• Electronic stop watch
• Sump tank : capacity : 60 liters
• Tanks will be made of stainless steel.
• The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

Control Panel:
Standard make On/Off switch, Mains Indicator etc.

• Accurate
• Automated
• Easy to operate

• Battery
• Battery charger
• Tool kit with case
• Plastic carrying case
• Silicon cloth
• Plastic rain cover and instruction manual)

• Magnification : 30 X
• Least Count : 1"
• Accuracy : 5"
• Distance Measuring Range With Single
• Prism : 3000 M
• Distance Accuracy : ( 2mm 2 ppm ) X D
• Display : Both Side (Graphics LCD 160 X 64 dots) with back light
• Internal Memory : 24000 Points
• Single Prism Assembly :
• Single Prism : 2 Nos.
• Prism Holder SIN-Tilt 3 Made in Japan
• Prism Pole with bubble Made in Japan
• Downloading software with F-4 data transfer cable : 1 No.
• Wooden Tripod : 1 No.

• Quick setting dumpy level with erect image
• Complete with wooden or aluminium folding tripod
• Axis made up of aluminium brass

• 20x magnification in plastic carrying case
• Length 225mm/175mm

• RLE-628 Rod Mill
• RLE-629 Sigma Mixer
• RLE-630 Gyratory Type Sieve Shaker
• RLE-631 Rotap Type Sieve Shaker
• RLE-632 Vibration Type Sieve Shaker
• RLE-633 Test Sieves
• RLE-634 Bucket Conveyor
• RLE-635 Ribbon Blender
• RLE-636 Effectiveness Of Power Consumption In Fluid Mixing
• RLE-637 Hammer Mill
• RLE-638 ClaRLEfiers (cone Type)
• RLE-639 Froth Flotation Cell
• RLE-640 Thickener (sedimentation Apparatus)
• RLE-641 Laboratory Pulveriser
• RLE-642 Jaw Crusher
• RLE-643 Roll Crusher
• RLE-644 Trommel
• RLE-645 Ball Mill
• RLE-646 Cyclone Separator
• RLE-647 Vibrating Screen
• RLE-648 Attrition Mill
• RLE-649 Elutriator
• RLE-650 Screw Conveyors
• RLE-651 Magnetic Separator
• RLE-652 Plate Frame Filter Press
• RLE-653 Leaf Filter
• RLE-654 Mineral Jig
• RLE-655 Belt Conveyors
• RLE-657 Rotary Vacuum Filter
• RLE-658 Power Consumption In Agitated Vess

We are specialized in offering a variegated range of Hydraulic Machine Laboratory Equipment to our customers at highly affordable prices. Our array of Hydraulic Machine Laboratory Equipments is manufactured adhering to the predefined industrial norms. This range is widely used in Hydraulic experiments in Lab and Hydraulic Machine Lab. Also, we offer this range in a timely manner to our customer.

Features:

• Simple operations
• Economies on time
• Very affordable price

The unit consists of an epicyclic gear train. Gear train consist of an internal gear having 56 teeth two planet gears with 21 teeth each and sun gear having 14 teeth. The train is driven by a 3-pH/1-pH, 1440 R.P.M. motor giving maximum input torque of 0.5 kg. The planet carrier carries the planet gears. The internal gear is mounted over a flange which rotates in bearings. A pulley is mounted over a output shaft of internal gear. Torque measurement arrangement with spring balance is provided for both the internal gear and planet carrier, so that either or then can be held stationary and holding torque required for stationary member and output torque for the other member can be measured. The whole unit is mounted over a sturdy frame. Motor current is calibrated for output torque of the motor. A three channel R.P.M. indicator (digital) can be supplied with the unit at an extra cost which enables to determine the angular velocities of all the members. A digital torque indicator for motor output torque can be supplied at an extra cost, instead of motor current calibration.

Service Required:

• Floor space of about 1.5 m. X 2 m.
• 220 V., 1-pH, A.C. supply.

We are specialized in the making and supply of an array of Compasses which is a steel needle, which is magnetized so that one end of the needle is always pointing towards the North Pole and helps us in directing the exact locations. These instruments are made high quality of stone base, wooden base and come in wooden boxes and key chains. Offered at reasonable rates, these products are in high demand in the market.

• Promising excellent performance
• Reliable performance
• High durability

To calibrate and determine the co-efficient of discharge for orifices of different diameters.

Consisting of Straight, convergent, divergent mouthpieces, transparent acrylic Piezometer, 0.5hp pump, sump tank, delivery tank and feed tank, hook gauge and controlling valves.

Sturdy load frame with chrome plated piston for rust free operation

Available in models :

• 1000kN capacity, hand operated, with one pressure gauge
• 1000kN capacity, motorized, with one pressure gauge
• 1000kN capacity, motorized, with digital display
• 2000kN capacity, hand operated, with one pressure gauge
• 2000kN capacity, motorized, with one pressure gauge
• 2000kN capacity, motorized, with three pressure gauges
• 2000kN capacity, motorized, with digital display
• 3000kN capacity, motorized, with three pressure gauges
• 3000kN capacity, motorized, with digital display

• Great capacity
• Low power consumption
• Precisely engineered

• Effective sealing at the plunger
• Robust in construction
• Operationally fluent

• Use to high quality Aluminum metal
• Brightly colored for high on site visibility
• High durability

• To determine total head, pump output, overall efficiency and pump efficiency of the Jet pump.
• To plot Graph
• Head vs Discharge
• Pump efficiency vs Discharge
• Pump HP vs Discharge.

• Electricity Supply: Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection.
• Water Supply (Initial Fill).
• Floor Drain required.
• Floor Area Required: 1.5m x 0.75m

• Pump : Monoblock jet pump of size 32mm x 25m x25mm Capacity 1 HP.
• Medium Flow : Clear Water.
• Sump Tank : Capacity 100 Ltrs.
• Flow Measurement : Using Measuring Tank (Capacity 70 Ltrs.) Electronic Stop watch
• Pressure Gauge: Bourdon type.
• Control Panel Comprises of Energy measurement : Energy meter Electronic, L T make.
• MCB : For overload protection.
• Standard make On/Off Switch, Mains Indicator, etc.
• Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus
• Tanks will be made of Stainless Steel.
• The whole set-up is well designed and arranged in a good quality painted structure.