Gohel Chemical Engineering Industries

Our sand separators operate vertically and use gravity, not centrifugal force, to separate sand from the flow. As the flow enters the sand trap, it is radically slowed and the direction changed 90 degrees by the stinger-diverter. This allows the sand to separate from the gas and liquids. Sand falls to the bottom of the separators and is kept there by a system of proprietary baffles. The baffles allow gas and liquids to move up and out while keeping the sand separate. Sand is removed by opening one of the two sand discharge ports during operation; shut-in is not required if one of the sand outs clogs.

We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 316 Gr F22 Cl.3 for these equipment.

Best suitable for Oil & Gas Sectors

We manufacture wide rang of Cold Gas Feed Separators as per customer's needs or design & specifications.

We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA240 316L for these equipment.

Best suitable for Oil & Gas Sectors

Gohel Chemical Engineering Industries Produces large capacity high pressure separators for different Industries such as chemical, petrochemical, refinery, oil & gas Industries..


We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 516 Gr70 claded with another material or without claded for these equipment.

Best suitable for Refinery Sectors.

We manufacture crystallisers for crystallization process...These are widly used in Petrochemical Industries.
Crystallization is the (natural or artificial) process of formation of solid crystals precipitating from a solution, melt or more rarely deposited directly from a gas. Crystallization is also a chemical solid–liquid separation technique, in which mass transfer of a solute from the liquid solution to a pure solid crystalline phase occurs. In chemical engineering crystallization occurs in a crystallizer. Crystallization is therefore an aspect of precipitation, obtained through a variation of the solubility conditions of the solute in the solvent, as compared to precipitation due to chemical reaction.


We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 516 Gr70 claded with SA240 Gr 30L or without claded for these equipment.

Best suitable for Petrochemical Sectors.

The term separator in oilfield terminology designates a pressure vessel used for separating well fluids produced from oil and gas wells into gaseous and liquid components. A separator for petroleum production is a large vessel designed to separate production fluids into their constituent components of oil, gas and water.

We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 516 M Gr415 claded with SS316L or without claded for these equipment.

Best suitable for Oil & Gas Sectors

Insulated Vessel - 10

  We manufacture Insulated vessel for saving heating and cooling loss during process.

 CAPACITY : 500 Litres  to  200,000 Litres.

A vessel that is inadequately designed to handle a high pressure constitutes a very significant safety hazard.

We manufacture High pressure Large capacity vessels with using pressure quality raw materials...

Cpacity upto 220m3
Pressure upto 80 kg


We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 516 Gr65 claded with another material or without claded for these equipment.

Best suitable for Chemical, Petrochemical, Refinery, Oil & Gas, Fertiliser Sectors.

We provide highly rated absorbant chamber with using high grade raw materials to our customers for various applications.


We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 516 Gr70 claded with another material or without claded for these equipment.

Best suitable for Refinery Sectors.

We manufacture quality water decompser as per customer's design & specificatiom,widly used in chemical sectors.


We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 302 Gr.B claded with another material or without claded for these equipment.

Best suitable for Chemical & Fertilizer Sectors.

We provide wide range of 2nd stage feed separator as per customer needs.

We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 516 M Gr416 claded with another material or without claded for these equipment.

Best suitable for Oil & Gas Sectors

We manufacture high quality Cold separator to our reputed customers..These are widely used in Refinery and Petrochemical Plants.


We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 516 Gr70 claded with another material or without claded for these equipment.

Best suitable for Refinery Sectors.

A high-pressure hot separator for the separation of an overhead product from a process of high-pressure hydrogenation of coals, tars, crude oils, whose distillation and extraction products or similar carbon-containing feedstock such as heavy oils, low-temperature carbonization oils, extracts of heavy oil sands and the like, is downstream from the bottom phase reactors of the high-pressure hydrogenation.

We provide Hot separator as per customer design & specifications.


We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 387 Gr22 Cl.22 for these equipment.

Best suitable for Refinery Sectors.

We manufacture high quality Rerun Drum as per customer's design & specifications.


We manufacture same with using following Materials of Constructions.

MOC: Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly prefer SA 516 Gr65 claded with Incoloy825 or without claded for these equipment.

Best suitable for Oil & Gas Sectors.

We manufacture Autoclave Vessel stirred tanks & pressure vessels, in chemical, petrochemical, oil & gas industry, refinery, biotech & pharmaceutical industries. A final formulation cum blending tank is usually employed during filling of sterile liquid formulations.

The tank is sterilized in an empty condition inside an autoclave large enough to hold the tank. It can be autoclaved in vertical or horizontal orientation, without causing damage to the agitator. After autoclaving, the motor is fitted & the product is aseptically transferred into the tank under stirring. The product can be maintained in this condition during the entire filling process. The impeller is located as low as possible in the tank, so that only a negligible amount of product is left unstirred, & that too at the very last stages of the batch.

We manufacture same with using following Materials of Constructions.

MOC: Mild Steel, Carbon Steel, Stainless Steel, Hastelloy, Alloy 20 and Incoloy.

We mostly Prefer SA 516 70Gr for Autoclave Vessels.

Ideal for Chemical, Petrochemical and Fertiliser sectors.