Good Morning Paints Private Limited

Additional Information:

• Delivery Time: 5
• Packaging Details: Avaailble Pack Size in 20 Ltr APCOTHERM EPN 200 two component high build epoxy phenolic novolac coating for high temperature service. Features and recommended use • designed to provide excellent corrosion & chemical resistance when used in high temperature service • recommended as a corrosion resistant barrier to protect for steelwork under thermal insulation subject to wet and dry cycles from -196° c to + 230° c • suitable for exposure to a wide range of corrosive environments and exterior of insulated or un-insulated steel pipeline, process equipments, vessels, etc., operating continuously upto 230°c and intermittently at 250°c • self priming; excellent adhesion on blast cleaned steel • excellent resistance to “thermal shock” experienced during rapid heating and cooling conditions

Additional Information:

• Packaging Details: APCODUR CF 655 (Coltar Epoxy Coating) Two component, high build, high solid, polyamide cured coal tar epoxy coating

Additional Information:

• Delivery Time: 2
• Packaging Details: Availble Pack Size in 20 Ltr only Single pack, air drying, general purpose, glossy DTM Enamel

Additional Information:

• Delivery Time: 5
• Packaging Details: Available Packs Size in 20 Ltr Only Two components, high build, polyamide cured epoxy coating

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only Two component high build, high solid, acrylic aliphatic polyurethane coating.

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only Two component, acrylic aliphatic polyurethane coating

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr Only APCOTHANE HB PU FINISH / APCOTHANE 680 Two component high build, high solid, acrylic aliphatic polyurethane coating FEATURES AND RECOMMENDED USE • Finish coat in epoxy / polyurethane systems • Good resistance to atmospheric exposure • Good resistance to water and saline atmosphere • Gives tough, abrasion resistant finish on curing

Additional Information:

• Packaging Details: APCOGLASS MASTIC 2000 / APCOGLASS 2000 Glass Flake Two component, high built, high solids, glass flake reinforced polyamine cured epoxy surface tolerant coating FEATURES & RECOMMENDED USE • High performance coating for highly aggressive aqueous/ chemical environment • Excellent corrosion and chemical resistance • Excellent impact and abrasion resistance • Compatible with various aged sound oleoresinous, epoxy and polyurethane coatings • Self-priming coating, tolerant to lower grades of surface preparation • Very low water permeability, due to glass flake barrier • Low volatile organic content

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr APCODUR ZINC PHOSPHATE PRIMER / APCODUR 206 Two component, epoxy primer with zinc phosphate pigment FEATURES & RECOMMENDED USE • Designed as an epoxy primer with good resistance to saline, marine and chemical environment • Free from lead and chromate containing pigment • Good adhesion on steel • Can be over coated with alkyd, chlorinated rubber, acrylic, epoxy, polyurethane coating

Additional Information:

• Packaging Details: APCOGUARD SF 156 solvent free high build heavy duty epoxy coating Two components, solvent free, high build , heavy duty epoxy coating FEATURES AND RECOMMENDED USE • Designed as an epoxy tank lining & internal pipeline coating for storage and transportation of potable water • Self-priming, excellent adhesion on blasted steel with good mechanical properties • Low VOC, eliminates explosion risks and fire hazards when applied in confined area • Coating also provides good resistance to range of products including crude oil, white oils, and variety of petroleum based solvents and potable water • Certified to NSF, UK as per BS 6920:2014 for use in contact with water intended for human consumption up to 65°C & cold water • Good aged recoatability • Easy application by brush and spray

Additional Information:

• Packaging Details: Pack Size in 20 Ltr Only ASIAN CHLORINATED RUBBER HIGH BUILD COATING Single pack, air drying chlorinated rubber finish paint Topcoat/ buildcoat in chlorinated rubber systems – Fast drying – Suitable for interior and exterior use Dry heat resistance upto 60o C

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr Only APCOSIL 605 IZ Inorganic zinc rich silicate A two component solvent based moisture curing inorganic zinc ethyl silicate coating Features and Recommended use • Designed as primer coat for application in highly aggressive environments • Excellent solvent resistance • Good resistance to saline and marine atmosphere • Can withstand substrate temperatures ranging from -90°C to +600°C • Not suitable for immersion in alkaline (more than pH 9 ) or acidic ( less than pH 5 ) liquids without suitable topcoats

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr Only APCOSIL 605 Z85 APCOSIL 610 Inorganic Zinc Silicate Two component solvent based moisture curing inorganic zinc ethyl silicate coating • Heavy duty primer, offering excellent corrosion protection in highly aggressive environments for steel structures • Meets zinc dust classification as per SSPC Paint 20 level 1 • Good resistance to and marine / offshore atmosphere • Recommended system primers in various high performance systems based on unsaponifiable binders • Excellent water and solvent resistance • Can withstand substrate temperatures from -90°C to 400°C, under normal atmospheric exposure conditions • With suitable top coat, provides excellent corrosion protection for steel substrate up to 600°C

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr Only APCOSIL 605 85% / APCOSIL 615 A two component solvent based moisture curing inorganic zinc silicate coating, containing 85% zinc by weight in the dry film. Complies with zinc dust level classification as per SSPC Paint 20 level 1 Available in zinc dust levels as per ASTM D 520, Type II FEATURES & RECOMMENDED USE • Heavy duty primer offering excellent corrosion protection in highly aggressive environments for steel structures • Excellent resistance to saline and marine / offshore atmosphere • Recommended system primers in various high performance systems based on unsaponifiable binders • Excellent water and solvent resistance • Can withstand substrate temperatures from -90°C to +400°C, under normal atmospheric exposure conditions • With suitable top coat, provides excellent corrosion protection for steel substrate upto +600°C

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr APCOSIL 605 – ZS A two component solvent based moisture curing inorganic zinc ethyl silicate coating FEATURES AND RECOMMENDED USE • Heavy duty primer, offering excellent corrosion protection in highly aggressive environments for steel structures • Excellent resistance to saline and marine / offshore atmosphere • Recommended system primers in various high performance systems based on unsaponifiable binders • Excellent water and solvent resistance • Can withstand substrate temperatures from -90ºC to +400ºC, under normal atmospheric exposure conditions • With suitable top coat, provides excellent corrosion protection for steel substrate up to +600ºC

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr Only APCOTHANE WB 200 Single pack, fast drying, hygienic, water based polyurethane dispersion wall finish FEATURES • Single pack, water based VOC compliant wall coating • Hygiene wall coating • Excellent anti-microbial anti-fungal performance • Suitable for both interior and exterior application • Excellent scrub resistance • Excellent resistance to stains and chemicals • Odour free and easy to apply • Easy to clean and maintain • APCOLITE universal stainer can be used for minor shade alterations • Finds application in sterile & clean rooms in pharmaceutical units, hospitals, food processing units, construction requiring quick turn-around etc.

Additional Information:

• Delivery Time: 3
• Packaging Details: Available Pack Size in 20 Ltr only

Additional Information:

• Delivery Time: Available Pack Size in 20 Ltr Only

Additional Information:

• Packaging Details: Availble Pack Size in 20Ltr Only APCODUR MIO / APCODUR 415 Two components, high build, high solid, micaceous iron oxide pigmented epoxy coating FEATURES & RECOMMENDED USE • Designed as an epoxy intermediate in protective coating systems for steel and concrete structures exposed to aggressive conditions • Excellent resistance to moisture and saline conditions • Good resistance to water and to splashes of mild chemicals • Good abrasion resistance

Additional Information:

• Packaging Details: APCOGUARD SF 156 Two components, solvent free, high build , heavy duty epoxy coating FEATURES AND RECOMMENDED USE • Designed as an epoxy tank lining & internal pipeline coating for storage and transportation of potable water • Self-priming, excellent adhesion on blasted steel with good mechanical properties • Low VOC, eliminates explosion risks and fire hazards when applied in confined area • Coating also provides good resistance to range of products including crude oil, white oils, and variety of petroleum based solvents and potable water • Certified to NSF, UK as per BS 6920:2014 for use in contact with water intended for human consumption up to 65°C & cold water • Good aged recoatability • Easy application by brush and spray