Good Morning Paints Private Limited

Additional Information:

• Packaging Details: SIGMA VIKOTE 56 Modified Acrylic Finish PRINCIPAL CHARACTERISTICS • Finish coat for above-water areas • Good gloss and color retention • Resistant to water and splash of mild chemicals • Fast-drying • Can be applied at low temperatures, down to –10°C (14°F) COLOR AND GLOSS LEVEL • White and various other colors (see also SIGMACARE shade card) • Gloss

Additional Information:

• Packaging Details: AMERCOAT 137 Non-Skid Epoxy Primer Non-Skid Epoxy Primer Excellent Adhesive Characteristics. Non-skid primer for Amercoat 138G; Qualified to Mil-PRF-24667, Types I and 2; Excellent adhesion

Additional Information:

• Packaging Details: SIGMAGLIDE 890 Two-component, silicone-based finish for fouling release system PRINCIPAL CHARACTERISTICS • Non-toxic, fouling release coating for ships, installations and seawater intakes under all fouling conditions • For use at new-building or maintenance COLOR AND GLOSS LEVEL • Redbrown (other colors available on request) • Gloss

Additional Information:

• Packaging Details: SIGMAGLIDE 1290 100% Pure silicone binder technology fouling release finish coat PRINCIPAL CHARACTERISTICS • Excellent fouling resistance and release performance • Low slime pick-up and easy slime release • Reduces vessel’s fuel consumption • Regenerating surface, long lasting properties • High volume solids • Biocide-free fouling release coating • Contributes to minimizing the environmental footprint • For use at new-building, refurbishment and maintenance • Silicone chemistry provides performance up to 90+ months

Additional Information:

• Packaging Details: SIGMACOVER 300 Two-Component, High-Build, Polyamine Adduct-Cured, Coal Tar Epoxy Coating

Additional Information:

• Packaging Details: AMERCOAT PSX 700 Two-Component, Engineered Siloxane Coating Unique, high gloss, isocyanate free solution • Can be applied directly over inorganic zinc • Excellent color and gloss retention • Resists graffiti • High solids, VOC compliant • Applied by brush, roller or spray, without thinning • Good resistance to splash and spillage of chemicals • Can be applied as a single coat, direct-to-metal for moderately corrosive environments (ISO 12944 C1-C3) COLOR AND GLOSS LEVEL • Full color range • High gloss

Additional Information:

• Packaging Details: SIGMAZINC 109 HS Two-Component, High Solids Polyamide Adduct Cured Zinc Rich Epoxy Primer PRINCIPAL CHARACTERISTICS • Designed as a system primer for various paint systems • Excellent anticorrosive properties • Quick-drying, can be overcoated after a short interval • Can serve as a holding primer for various maintenance systems for a total repair • Very good primer for systems with high solids epoxy buildcoats • Complies with SSPC-Paint 20 level 2 and ISO 12944.5 COLOR AND GLOSS LEVEL • Gray, reddish gray • Flat

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr only AMERLOCK 400 SIGMACOVER 400 Two-component, high solids epoxy coating PRINCIPAL CHARACTERISTICS • High performance self priming universal epoxy • High solids, low VOC • Surface tolerant and abrasion resistant • Compatible with prepared, damp surfaces • Good adhesion on most existing coatings • Available in MIO or conventional pigmented grade • Good resistance to splash and spillage of chemicals • Meets NSF Standard 61 for valves (US manufacturing only)

Additional Information:

• Packaging Details: SIGMARINE 48 General Purpose Gloss Paint Based on an Alkyd-Modified Resin PRINCIPAL CHARACTERISTICS • Particularly suitable as a finish for boottop, topside, deck and deck equipment • A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention • Can be applied over most intact alkyd paints • This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions • Also available with non-skid material (supplied separately) for use on deck surfaces COLOR AND GLOSS LEVEL • White and various other colors (see also SIGMACARE shade card) • Gloss

Additional Information:

• Packaging Details: SIGMAWELD 165 Moisture-Curing Zinc (Ethyl) Silicate Prefabrication Primer PRINCIPAL CHARACTERISTICS • Suitable for automatic application on shot blasted steel plates • Fast drying properties • Good cutting and excellent welding properties, including MIG/MAG welding in various positions (either automatic or manual welding) • Provides corrosion protection up to 9 months, when applied at a DFT of 13 μm (0.5 mil) (depending on exposure conditions and blasting profile) • Can be used as a first coat in various paint systems • Suitable for sea water immersion in combination with controlled cathodic protection systems • Excellent thermal stability minimizes heat damage during hot work procedures • No adherence of weldspatter at surrounding primed surface • Approved by Lloyd's Register of Shipping for use as a prefabrication primer COLOR AND GLOSS LEVEL • Gray, reddish gray • Flat

Additional Information:

• Packaging Details: SIGMACOVER 525 Two-Component, Polyamine-Cured Epoxy Tiecoat PRINCIPAL CHARACTERISTICS • Final coat in epoxy underwater anticorrosive systems • Epoxy tiecoat for use with PPG antifoulings as specified • Excellent water resistance • Good abrasion- and impact resistance COLOR AND GLOSS LEVEL • Black, gray • Flat

Additional Information:

• Packaging Details: SIGMARINE 48 LF General Purpose Gloss Paint Based on an Alkyd-Modified Resin PRINCIPAL CHARACTERISTICS • Particularly suitable as a finish for boottop, topside, deck and deck equipment • A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention • Can be applied over most intact alkyd paints • This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions • Also available with non-skid material (supplied separately) for use on deck surfaces COLOR AND GLOSS LEVEL • White and various other colors (see also SIGMACARE shade card) • Gloss

Additional Information:

• Packaging Details: SIGMASHIELD 880 High Build Polyamine Adduct-ACured Epoxy Coating PRINCIPAL CHARACTERISTICS • Primarily designed for use in offshore splash zone maintenance • Outstanding sea water resistance • Excellent corrosion resistance • Surface tolerant and abrasion resistant • Continues to cure when immersed in water • Long-term protection in a single-coat application • Resistant to well designed cathodic protection • Suitable for application on exterior of buried pipes • Suitable on wet blast or ultra high pressure water (UHPWW) cleaned substrates (damp or dry) • Suitable primer for SIGMAGLIDE fouling release system COLOR AND GLOSS LEVEL • Offwhite, yellow and black (other colors available on request) • Gloss Note: Epoxy coatings will characteristically chalk and fade upon exposure to sunlight. Light colors are prone to ambering to some extent in interior or exterior exposures

Additional Information:

• Packaging Details: AMERCOAT 138G Heavy duty Non-Skid Epoxy Coating DESCRIPTION Heavy duty non-skid epoxy coating PRINCIPAL CHARACTERISTICS • Tough, abrasion resistant epoxy coating containing hard non-skid grit • Non-skid grit pre-dispersed in epoxy component • Qualified to Mil-PRF-24667, Types I and 2 COLOR AND GLOSS LEVEL • Dark gray, black • Low sheen Note: Epoxy coatings will characteristically chalk and fade upon exposure to sunlight

Additional Information:

• Packaging Details: SIGMARINE 80 Finishing Coat Based on a Alkyd-Modified Petrolium Resin Pigmented With Aluminium

Additional Information:

• Packaging Details: SIGMA ECOFLEET 290 Iinear Polishing Antifouling Partuculary Suiltable for Deep Sea Vessels PRINCIPAL CHARACTERISTICS • TBT-free self-polishing antifouling for new-building and maintenance • Controls settlement of shell and weed fouling for prolonged periods, depending on sailing pattern and routes • Controlled polishing rate to give effective protection in accordance with the specified film thickness and smoothing of the surface • Complies with IMO Antifouling Systems Convention COLOR AND GLOSS LEVEL • Redbrown, brown, black • Flat

Additional Information:

• Packaging Details: SIGMA SAILADVANCE RX Low friction, self lubricating, linear self polishing antifouling based on hydrolysable binder composition PRINCIPAL CHARACTERISTICS • Designed for all vessel types and speeds and particularly effective for slow steaming because of its engineered oils binder composition • Evolves in a linear polishing and consistent biocide release for predictable performance up to 90 months • Most suitable for mid to high operational ranges • Constant surface activity, limited leach layer build-up • Low friction properties from lubricating engineered oils surpressing turbulent flow • Extended idle days through the release effect of engineered oils creating a slippery surface • High volume solids for efficient application • Suitable for application at New Build and Dry Dockings • Based on PPG technology COLOR AND GLOSS LEVEL • Redbrown, brown, black • Flat

Additional Information:

• Packaging Details: SIGMAGUARD 750 Two-component, moisture-curing zinc-rich (ethyl) silicate coating PRINCIPAL CHARACTERISTICS • Tank coating with excellent solvent and chemical resistance • To be used as tank coating or as a system primer in various paint systems based on unsaponifiable binders • Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions • High zinc content resulting in excellent corrosion protection • Good impact and abrasion resistance • Certificate for ASTM A-490 class 'B' for slip coefficient • Recognized corrosion control coating (Lloyd's register) • Must not be used for immersion in alkaline (more than pH 9) or acidic (less than pH 5.5) liquids • Complies with SSPC-Paint 20 level 2 and ISO 12944.5

Additional Information:

• Packaging Details: SIGMACOVER™ 350 ( polyamide cured epoxy primer) Two-component, high-build polyamide cured epoxy primer/coating based upon pure epoxy technology PRINCIPAL CHARACTERISTICS • Surface tolerant primer/coating for wide use in Marine and Protective Coatings • Marine use: suitable on topsides, decks, superstructures and cargo holds • Excellent corrosion resistance • Compatible with various aged coatings • Suitable as floor coating for pedestrian traffic with dry to walk on time of 6 hours at 20°C (68°F) • Good impact and abrasion resistance • Smooth film, easy to clean • Resistant to splash and spillage of a wide range of chemicals

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr only Two-component, high-build, polyamide-cured recoatable epoxy coating

Additional Information:

• Packaging Details: SIGMA ECOFLEET 270 High Activ Self Polishing Antifouling for Deep Sea and Coastal Vessels DESCRIPTION High active self polishing antifouling for deep sea and coastal vessels PRINCIPAL CHARACTERISTICS • Antifouling providing excellent value for commercial marine use • Fouling protection based on wide spectrum biocide composition • Based on long and successful technology track record • Compatible with a wide range of anticorrosive underwater hull systems • Suitable on coated steel hulls on seagoing vessels, workboats and barges COLOR AND GLOSS LEVEL • Red, redbrown • Flat

Additional Information:

• Packaging Details: SIGMACOVER™ 522 Epoxy Primer Sealer Coating Two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating PRINCIPAL CHARACTERISTICS • Excellent adhesion to, and sealing of, weathered-, cleaned-, zinc-rich primers and metal-sprayed steel • Good adhesion to properly pretreated galvanized steel • Can be used in systems for atmospheric or water-immersed exposure conditions • Good resistance to industrial- or chemical-contaminated atmospheric exposure conditions • Good abrasion and impact resistance • Pass cryogenic cyclic test from -196°C (-321°F) to 140°C (284°F) • Resistant to temperatures up to 200°C (390°F) in dry atmospheric exposure conditions

Additional Information:

• Production Capacity: 100000
• Delivery Time: 1 Day
• Packaging Details: Available Pack Size 20 Ltr Only Universal epoxy anticorrosive primer, based upon pure epoxy technology

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Two-component, polyamide high-build epoxy primer/buildcoat, containing zinc phosphate

Additional Information:

• Production Capacity: 100000
• Delivery Time: 1 Days
• Packaging Details: Available Pack Size 20 Ltr only Two-component, high solids, high-build, polyamide cured epoxy coating

Additional Information:

• Packaging Details: SIGMACOVER 555 Polyamide Cured Epoxy Anticorrosive Tiecoat Two-component, polyamide-cured epoxy anticorrosive tiecoat PRINCIPAL CHARACTERISTICS • Final coat in epoxy underwater anticorrosive systems • Excellent water resistance • Epoxy anticorrosive with excellent adhesion for antifoulings • Good abrasion and impact resistance COLOR AND GLOSS LEVEL • Black, gray • Eggshell

The PPG SIGMAFAST 278 high-solids zinc phosphate epoxy primer and build coat is a proven epoxy technology that combines 80% of volume solids with excellent fast-drying properties in one product. It is ideal for in-shop applications. Our unique coating is the only product on the market that combines 80% volume solids with excellent fast drying properties.

This innovative product, part of the PPG brand, is the latest coating development based on our long history in epoxy chemistry. This coating solution improves the speed of in-shop applications while also providing compliance to all VOC legislation.

PPG SIGMAFAST 278 is designed for shop and field applications. With its unique film build capabilities, dry time, recoat window and volume solids, it has proven value to owners and applicators.

SIGMAFAST 278 is a two-component, zinc phosphate epoxy primer and build coat that offers a unique range of features and benefits for in-shop steel fabrication:

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Only The ultimate solution for in-shop application The PPG SIGMAFAST 278 high-solids zinc phosphate epoxy primer and build coat is a proven epoxy technology that combines 80% of volume solids with excellent fast-drying properties in one product. It is ideal for in-shop applications. Our unique coating is the only product on the market that combines 80% volume solids with excellent fast drying properties. This innovative product, part of the PPG brand, is the latest coating development based on our long history in epoxy chemistry. This coating solution improves the speed of in-shop applications while also providing compliance to all VOC legislation. PPG SIGMAFAST 278 delivers improved in-shop productivity PPG SIGMAFAST 278 is designed for shop and field applications. With its unique film build capabilities, dry time, recoat window and volume solids, it has proven value to owners and applicators. SIGMAFAST 278 is a two-component, zinc phosphate epoxy primer and build coat that offers a unique range of features and benefits for in-shop steel fabrication:

Additional Information:

• Packaging Details: AMERCOAT 138 L Epoxy Non-Skid As a weldable preconstruction primer in automated shoppriming plants over abrasive blast cleaned steel: protects against weathering on flat steel plates and structural steel shapes. A single coat applied at 20 to 25 μm protects against weathering during handling and fabricating. Steel primed with Amercoat 138 can be readily cut and welded by automatic and manual methods. After fabrication, overcoat with suitable topcoat systems. INDUSTRIAL - Structural steel, machinery, pipes and tank exteriors in paper mills, oil refineries, power plants, chemical process and waste treatment plants. MARINE - Decks, hulls, bottoms and superstructures of ships, barges and workboats. Piers, offshore platforms and related structures

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Only Two-component, high solids, zinc phosphate epoxy primer and buildcoat

SIGMADUR FINISH HIGH GLOSS acrylic polyurethane
two component acrylic polyurethane, finish for application overprimed concrete, metals and textured surfaces
for interior and exterior useCHARACTERISTICS - unsaponifiable and alkaline resistant- excellent resistance to atmospheric exposure- excellent colour and gloss retention- excellent U.V. resistance- anti-carbonation properties- excellent non yellowing properties- resistant to water, splash and spillage of mild chemicals and solvents- abrasion resistance- easy to apply by brush and roller

Additional Information:

• Packaging Details: SIGMADUR FINISH HIGH GLOSS acrylic polyurethane two component acrylic polyurethane, finish for application over primed concrete, metals and textured surfaces for interior and exterior use CHARACTERISTICS - unsaponifiable and alkaline resistant - excellent resistance to atmospheric exposure - excellent colour and gloss retention - excellent U.V. resistance - anti-carbonation properties - excellent non yellowing properties - resistant to water, splash and spillage of mild chemicals and solvents - abrasion resistance - easy to apply by brush and roller

Additional Information:

• Packaging Details: SIGMADUR 550 H aliphatic acrylic polyurethane finishTwo-component, high solids, high-build aliphatic acrylic polyurethane finish PRINCIPAL CHARACTERISTICS • Excellent resistance to atmospheric exposure conditions • Good color and gloss retention • Cures at temperatures down to -5°C (23°F) • Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals • Can be recoated even after long atmospheric exposure • Good application properties by airless, brush and roller • High film build-up to 150 μm (6.0 mils) for one coat • Can be applied direct to metal • Drying and curing times can be reduced significantly using PPG 866M ACCELERATOR

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Only Heat-resistant silicone/acrylic finish

Additional Information:

• Packaging Details: SIGMATHERM 175 Heat-Resistant Modified Alkyd Aluminium Finish DESCRIPTION Heat-resistant modified alkyd aluminum finish PRINCIPAL CHARACTERISTICS • Heat-resistant up to 175°C (350°F) • High-brilliancy • Spray application improves the appearance • A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat COLOR AND GLOSS LEVEL • Aluminum • Gloss

Additional Information:

• Packaging Details: SIGMATHERM 230 Two-Component, High-Build, Heat-Resistant Epoxy Phenol Novolac Coating PRINCIPAL CHARACTERISTICS • Provides a corrosion resistant barrier on carbon steel and stainless steel under thermal insulation • Suitable as heat resistant system under insulation up to 230°C (450°F) • Suitable for use in cryogenic conditions • Passes cryogenic cyclic test down to -196°C (-321°F) • Excellent protection and resistance against corrosion and severe chemicals • Excellent resistance to thermal shock during rapid wet & dry cycling • Meets CS-1, 3 and 4 for carbon steels under thermal insulation according to NACE SP0198-10 • Meets SS-1, 2 and 3 for stainless steels under thermal insulation according to NACE SP0198-10 • No post-curing is required to obtain mechanical strength • Can be applied on hot substrate up to 150°C (302°F), please contact your PPG representative for detail COLOR AND GLOSS LEVEL • Pink, gray • Eggshell Note: Epoxy coatings will chalk and fade upon exposure to sunlight, elevated temperatures, or chemical exposure. Discoloration and normal chalking does not impact performance. Light colors will darken over time. Some batch-to-batch variation in color is to be expected. Color matches are approximate.

Additional Information:

• Packaging Details: FAST DRY 4190 One-component, quick dry universal primer PRINCIPAL CHARACTERISTICS • Ideal for structural steel, tank exteriors, and equipment • Fast drying properties • Corrosion resistant in normal atmospheric conditions • Interior or Exterior Usage • Easy application • Contains no reportable organic HAPS • May be topcoated on ferrous metal with epoxy and polyurethane coatings as well as conventional alkyds and latex products

Additional Information:

• Packaging Details: STEELGUARD 751 One component thin-film solvent-borne intumescent coating for fire protection of structural steelwork PRINCIPAL CHARACTERISTICS • Tested and assessed to EN 13381-8, BS 476-20/21 and AS 1530.4 for up to 120 minutes protection to cellulosic fires • Tested and assessed to GB14907 for up to 150 minutes protection to cellulosic fires • Off-site or on-site application • Up to 1500 μm (60.0 mils) DFT in a single coat • Suitable for C1 to C4 internal and external environments (ISO 12944); for dry internal (C1) environments no topcoat is required • Weather resistant up to 12 months without topcoat provided the coating has been applied in accordance with INFORMATION SHEET 1222 and is not subject to running or pooling water, high humidity or immersion conditions • CE marked product, ETA 22/0574 • Assessed to EAD 350402-00-1106 for all durability classifications