Graylogix

Number Of Channels	1
Relay Type	SPDT
Voltage Type	DC
Mounting Type	PCB Mount
Brand	omron
Coil Voltage	5 V
Current Rating	16 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	5 V

Omron Relay Module 5V 23A is designed to control high-current loads such as motors, lights and other electrical devices. It is a small module that contains a power relay controlled by a 5V signal. The module can switch loads up to 16A at a maximum voltage of 250V AC or 30V DC.

The module has a compact design and is easy to install. It has three input pins, including ground, signal, and power supply pins

The module has a compact design and is easy to install. It has three input pins, including ground, signal, and power supply pins for the control circuitry. The output side of the module has two screw terminals for connecting the load. The module also includes an LED indicator that shows the status of the relay.

The Omron Relay Module 5V 23A is widely used in industrial control applications, home automation systems, and robotics. It is a reliable and efficient solution for controlling high-power devices with low-voltage control signals. The module is compatible with a wide range of microcontrollers, including Arduino and Raspberry Pi, making it easy to integrate into existing projects.

Features of  Omron Relay Module 5V 23A:

• High current 23 A switching surpassing standard G2RL models.
• Meets ambient operating temperature requirements of 105°C
• Reinforced insulation between coil and contact with 10 kV Impulse voltage.
• Conforms to EN60335-1 of Safety of Household appliances.
• Clearance and creepage distances: 8 mm / 8 mm min.
• Coil insulation system: Class F (UL1446)
• Number of pole: 1 Pole
• Contact Form A: SPST-NO (1a)
• Enclosure Rating None: Flux protection
• Rated current (mA): 80.0
• Coil resistance (Ω) : 62.5
• Model : G2RL-1A-E2-CV-HA

Additional Information:

• Item Code: 85364100
• Production Capacity: 100
• Delivery Time: 2 to 3 days
• Packaging Details: industry standard

Number Of Channels	1
Relay Type	SPDT
Voltage Type	DC
Mounting Type	DIN Rail
Brand	Shavison
Coil Voltage	12 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-20 - 50 degree c
Input Voltage	12 V

12V 1Ch Relay Module with Optocoupler is a small and easy to use . Use it to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances – lights, fans, etc, and even high power motors at lower voltages.

The board uses a high-quality relay, which can handle a maximum of 7A/250 V AC or 10A/125V AC. Each relay has all three connections – Common, Normally Open, Normally Closed brought out to 3 pin screw terminals which make it easy to make and remove connections. The board has a relay status LED to ease debugging. The board can accept control inputs within a wide range of voltages from 4V to 12V.

Relays were first used in long-distance telegraph circuits as signal repeaters they refresh the signal coming in from one circuit by transmitting it on another circuit.Furthermore telephone exchanges and early computers extensively employed relays to perform logical operations

Also electrical relays got their start in application to telegraphs. American scientist Joseph Henry is often cited to have invented a relay in 1835 in order to improve his version of the electrical telegraph, developed earlier in 1831.However, an official patent was not issued until 1840 to Samuel Morse for his telegraph, which is now called a relay.

Features of 12V 1Ch Relay Module:

• Relay Voltage 12V
• Channels = 1
• Optically Isolated = YES
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 12V 1Ch Relay Module with Optocoupler

Video Link for the different types of Relays:

Number Of Channels	2
Relay Type	SPDT
Voltage Type	DC
Mounting Type	DIN Rail
Brand	Shavison
Coil Voltage	12 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-20 - 50 degree c
Input Voltage	12 V

12V 2CH Relay Module is a small and easy to use . Use it to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances – lights, fans, etc, and even high power motors at lower voltages.

The board uses a high-quality relay, which can handle a maximum of 7A/250 V AC or 10A/125V AC. Each relay has all three connections – Common, Normally Open, Normally Closed brought out to 3 pin screw terminals which make it easy to make and remove connections. The board has a relay status LED to ease debugging. The board can accept control inputs within a wide range of voltages from 4V to 12V.

Relays were first used in long-distance telegraph circuits as signal repeaters they refresh the signal coming in from one circuit by transmitting it on another circuit.Furthermore the telephone exchanges and also the early computers extensively employed relays to perform logical operations

Also electrical relays got their start in application to telegraphs. American scientist Joseph Henry is often cited to have invented a relay in 1835 in order to improve his version of the electrical telegraph, developed earlier in 1831.However, an official patent was not issued until 1840 to Samuel Morse for his telegraph, which is now called a relay.

Features of 12V 2CH Relay Module:

• Relay Voltage 12V
• Channels = 2
• Optically Isolated = NO
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 12V 2 Channel Relay Module.

Number Of Channels	2
Relay Type	SPDT
Voltage Type	DC
Mounting Type	DIN Rail
Brand	Shavison
Coil Voltage	12 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	12 V

12V 2Ch Relay Module with Optocoupler is a small and easy to use and subsequently it can be used to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances – lights, fans, etc, and even high power motors at lower voltages.

The board uses a high-quality relay however it can handle a maximum of 7A/250 V AC or 10A/125V AC. Each relay has all three connections Common, Normally Open, Normally Closed markedly brought out to 3 pin screw terminals which can make it easy to make and remove connections. The board has a relay status LED i.e. to ease debugging. The board can accept control inputs within a wide range of voltages undeniably from 4V to 12V.

Relays were first used in long-distance telegraph circuits as signal repeaters they refresh the signal coming in from one circuit by transmitting it on another circuit.Furthermore the telephone exchanges and also the early computers extensively employed relays to perform logical operations

Also electrical relays got their start in application to telegraphs. American scientist Joseph Henry is often cited to have invented a relay in 1835 in order to improve his version of the electrical telegraph, developed earlier in 1831.However, an official patent was not issued until 1840 to Samuel Morse for his telegraph, which is now called a relay.

Features of 12V 2Ch Relay Module:

• Relay Voltage 12V
• Channels = 2
• Optically Isolated = YES
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 12V 2Ch Relay Module with Optocoupler

Number Of Channels	1
Relay Type	SPDT
Voltage Type	DC
Mounting Type	PCB Mount
Brand	Shavison
Coil Voltage	12 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	12 V

12V 30A T Type Relay Module with on board Optocoupler has 30A switching capability and suitable to both DC and AC. Significantly it can be used to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances – lights, fans, etc, and even high power motors at lower voltages.

The board uses a high-quality relay, which can handle a maximum of 30A/250 V AC or 30A/125V AC. Each relay has all three connections – Common, Normally Open, Normally Closed brought out to 3 pin screw terminals which make it easy to make and remove connections. The board has a relay status LED to ease debugging. The board can accept control inputs within a wide range of voltages from 4V to 12V.

Relays were first used in long-distance telegraph circuits as signal repeaters they refresh the signal coming in from one circuit by transmitting it on another circuit.Furthermore the telephone exchanges and also the early computers extensively employed relays to perform logical operations

Also electrical relays got their start in application to telegraphs. American scientist Joseph Henry is often cited to have invented a relay in 1835 in order to improve his version of the electrical telegraph, developed earlier in 1831.However, an official patent was not issued until 1840 to Samuel Morse for his telegraph, which is now called a relay.

Product Features of 12V 30A T Type Relay:

• Relay Voltage 12V
• Channels = 1
• Optically Isolated = YES
• TTL interface to trigger the relay
• Relay Current handling capacity = 30A
• Relay Type: T90
• Relay Contacts NO NC and Common.

Package Includes:

1 x 12V 30A T Type Relay Module with on board Optocoupler

Number Of Channels	4
Relay Type	SPDT
Voltage Type	DC
Mounting Type	DIN Rail
Brand	Shavison
Coil Voltage	12 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	12 V

12V 4CH Relay Module is a small and easy to use . Use it to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances – lights, fans, etc, and even high power motors at lower voltages.

The board uses a high-quality relay, which can handle a maximum of 7A/250 V AC or 10A/125V AC. Each relay has all three connections – Common, Normally Open, Normally Closed brought out to 3 pin screw terminals which make it easy to make and remove connections. The board has a relay status LED to ease debugging. The board can accept control inputs within a wide range of voltages from 4V to 12V.

Relays were first used in long-distance telegraph circuits as signal repeaters they refresh the signal coming in from one circuit by transmitting it on another circuit.Furthermore the telephone exchanges and also the early computers extensively employed relays to perform logical operations

Also electrical relays got their start in application to telegraphs. American scientist Joseph Henry is often cited to have invented a relay in 1835 in order to improve his version of the electrical telegraph, developed earlier in 1831.However, an official patent was not issued until 1840 to Samuel Morse for his telegraph, which is now called a relay.

Features of 12V 4CH Relay Module:

• Relay Voltage 12V
• Channels = 4
• Optically Isolated = NO
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 12V 4 Channel Relay Module.

Number Of Channels	1
Relay Type	SPDT
Voltage Type	DC
Mounting Type	PCB Mount
Brand	Shavison
Coil Voltage	5 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	5 V

Product Description:

5V 1Ch Relay Module with Optocoupler is an electronic component commonly used in various applications for controlling high-voltage devices or circuits with a lower-voltage microcontroller or digital signal. Let’s break down the key features and components of this module. Applications for a 5V 1-Channel Relay Module with Optocoupler are diverse and can include home automation, industrial automation, robotics, and any project where you need to control high-voltage devices safely using a microcontroller or digital signal.

This module can be interfaced with any microcontrollers like Arduino UNO, AVR, PIC, Raspberry PI, ESP32 etc, making versatile to control any AC and DC loads conveniently,

Switching both AC (Alternating Current) and DC (Direct Current) loads with a 5V 1-Channel Relay Module with Optocoupler follows a similar principle, but there are some differences to consider. Below are the general safety steps for switching both AC and DC loads:

Note: Always exercise caution when working with electrical circuits, especially when dealing with high-voltage AC power. Ensure you have the necessary knowledge and take safety precautions, such as turning off the power source and wearing appropriate safety gear.

Product Specs of 5V 1Ch Relay Module:

• Relay Voltage 5V
• Channels = 1
• Optically Isolated = YES
• TTL interface = to trigger the relay
• Relay Current handling capacity = 7A
• Relay Type = Sugar Cube
• Relay Contacts NO, NC and Common.

Number Of Channels	2
Relay Type	SPDT
Voltage Type	DC
Mounting Type	PCB Mount
Brand	Shavison
Coil Voltage	5 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	0-50 degree c
Input Voltage	5 V

5V 2Ch Relay Module with Optocoupler is a small and easy to use and subsequently it can be used to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances – lights, fans, etc, and even high power motors at lower voltages.

The board uses a high-quality relay however it can handle a maximum of 7A/250 V AC or 10A/125V AC. Each relay has all three connections Common, Normally Open, Normally Closed markedly brought out to 3 pin screw terminals which can make it easy to make and remove connections. The board has a relay status LED i.e. to ease debugging. The board can accept control inputs within a wide range of voltages undeniably from 4V to 12V.

Features of 5V 2Ch Relay Module:

• Relay Voltage 5V
• Channels = 2
• Optically Isolated = YES
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 5V 2Ch Relay Module with Optocoupler

Number Of Channels	4
Relay Type	SPDT
Voltage Type	DC
Mounting Type	PCB Mount
Brand	Shavison
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	5 V

5V 4CH Relay Module with on board 10A switching capability and suitable to both DC and AC. Significantly it can be used to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances lights, fans, etc, and similarly even high power motors at lower voltages.

The board uses a high-quality relay subsequently which can handle a maximum of 30A/250 V AC or 30A/125V AC. Each relay has all three connections Common, Normally Open, Normally markedly Closed brought out to 3 pin screw terminals which make it easy to make and remove connections. The board has a relay status LED unlike to ease debugging. The board can accept control inputs within a wide range of voltages from 4V to 12V.

Features of 5V 4CH Relay Module:

• Relay Voltage 5V
• Channels = 4
• Optically Isolated = NO
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 5V 4 Channel Relay Module.

Additional Information:

• Item Code: C-33
• Production Capacity: 100
• Delivery Time: 2 to 3 days
• Packaging Details: industry standard

Number Of Channels	4
Relay Type	SPDT
Voltage Type	DC
Mounting Type	PCB Mount
Coil Voltage	5 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	5 V

5V 4Ch Relay Module with Optocoupler is a small and easy to use. Significantly it can be used to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances lights, fans, etc, and similarly even high power motors at lower voltages.

The board uses a high-quality relay subsequently which can handle a maximum of 30A/250 V AC or 30A/125V AC. Each relay has all three connections Common, Normally Open, Normally markedly Closed brought out to 3 pin screw terminals which make it easy to make and remove connections. The board has a relay status LED unlike to ease debugging. The board can accept control inputs within a wide range of voltages from 4V to 12V.

Features of 5V 4Ch Relay Module:

• Relay Voltage 5V
• Channels = 4
• Optically Isolated = YES
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 5V 4Ch Relay Module with Optocoupler

Additional Information:

• Production Capacity: 100
• Delivery Time: 2 TO 3 DAYS
• Packaging Details: industry standard

Number Of Channels	4
Relay Type	SPDT
Voltage Type	DC
Mounting Type	DIN Rail
Brand	Shavison
Coil Voltage	12 V
Current Rating	10 A
Switching Voltage	125 V
Operating Temperature	-40 - 85 degree c
Input Voltage	12 V

12V 4Ch Relay Module with Optocoupler is a small and easy to use. Significantly it can be used to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances lights, fans, etc, and similarly even high power motors at lower voltages.

The board uses a high-quality relay subsequently which can handle a maximum of 30A/250 V AC or 30A/125V AC. Each relay has all three connections Common, Normally Open, Normally markedly Closed brought out to 3 pin screw terminals which make it easy to make and remove connections. The board has a relay status LED unlike to ease debugging. The board can accept control inputs within a wide range of voltages from 4V to 12V.

Relays were first used in long-distance telegraph circuits as signal repeaters they refresh the signal coming in from one circuit by transmitting it on another circuit.Furthermore the telephone exchanges and also the early computers extensively employed relays to perform logical operations

Also electrical relays got their start in application to telegraphs. American scientist Joseph Henry is often cited to have invented a relay in 1835 in order to improve his version of the electrical telegraph, developed earlier in 1831.However, an official patent was not issued until 1840 to Samuel Morse for his telegraph, which is now called a relay.

Features of 12V 4Ch Relay Module:

• Relay Voltage 12V
• Channels = 4
• Optically Isolated = YES
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 12V 4Ch Relay Module with Optocoupler

Number Of Channels	2
Relay Type	SPDT
Voltage Type	DC
Mounting Type	PCB Mount
Brand	Shavison
Coil Voltage	5 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-10 - 60 degree c
Input Voltage	5 V

5V 2CH Relay Module is a small and easy to use and subsequently it can be used to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances – lights, fans, etc, and even high power motors at lower voltages.

The board uses a high-quality relay however it can handle a maximum of 7A/250 V AC or 10A/125V AC. Each relay has all three connections Common, Normally Open, Normally Closed markedly brought out to 3 pin screw terminals which can make it easy to make and remove connections. The board has a relay status LED i.e. to ease debugging. The board can accept control inputs within a wide range of voltages undeniably from 4V to 12V.

Features of 5V 2CH Relay Module:

• Relay Voltage 5V
• Channels = 2
• Optically Isolated = NO
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 5V 2 Channel Relay Module.

Video Link for the different types of Relays:

Number Of Channels	1
Relay Type	SPDT
Voltage Type	DC
Mounting Type	PCB Mount
Brand	Automation
Coil Voltage	12 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	12 V

12V 1CH Relay Module is a small and easy to use module.Use it to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Also its perfect for switching 240V appliances – lights, fans, etc, and even high power motors at lower voltages.

Also the board uses a high-quality relay, which can handle a maximum of 7A/250 V AC or 10A/125V AC.Furthermore each relay has all three connections – Common, Normally Open, Normally Closed brought out to 3 pin screw terminals which make it easy to make and remove connections.Alltogether the board has a relay status LED to ease debugging.Also the board can accept control inputs within a wide range of voltages from 4V to 12V.

Relays were first used in long-distance telegraph circuits as signal repeaters they refresh the signal coming in from one circuit by transmitting it on another circuit.Furthermore telephone exchanges and early computers extensively employed relays to perform logical operations

Also electrical relays got their start in application to telegraphs. American scientist Joseph Henry is often cited to have invented a relay in 1835 in order to improve his version of the electrical telegraph, developed earlier in 1831.However, an official patent was not issued until 1840 to Samuel Morse for his telegraph, which is now called a relay.

Features of 12V 1CH Relay Module:

• Relay Voltage 12V
• Channels = 1
• Optically Isolated = NO
• TTL interface to trigger the relay
• Relay Current handling capacity = 7A @ 250V AC
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.
• Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)

Package Includes:

1 x 12V 1 Channel Relay Module.

Additional Information:

• Item Code: C-37
• Production Capacity: 100
• Delivery Time: 2 to 3 days
• Packaging Details: industry stardard

Number Of Channels	1
Relay Type	SPDT
Voltage Type	DC
Mounting Type	DIN Rail
Brand	Shavison
Coil Voltage	5 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	12 V

5V 1CH Relay Module, A wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on can control it. It is also able to control various appliances and other types of equipment with a large current.

Relay output maximum contact is AC250V 7A and DC30V 7A. One can connect a microcontroller with standard interface directly to it. Red working status indicator lights are conducive to the safe use. It has a wide range of applications such as all MCU control, industrial sector, PLC control, smart home control.

Ready to get switching on your Raspberry Pi?! This neat relay module features 1 x 5V relays rated at 7A/250V each. It is designed to switch currents (7A) or high voltage (250V) loads with the help of microcontroller!

Each relay can individually switch on/off by an non opto-isolated digital input, which that can connect directly to a microcontroller output pin. It only requires a voltage of approx 1.0V to switch the inputs on but can handle input voltages up to 5V. This makes it ideal for 1.0V to 5V devices.

Note: The relay type model available for this product is JQC3F-5VDC-C, SRD-05VDC-SL-C, and FL-3FF-S-Z. You may get any one of them randomly.

5V 1CH Relay Module with TTL Interface to trigger the relay with the following features:

• Relay Voltage 5V
• Channels = 1
• Optically Isolated = NO
• TTL interface to trigger the relay
• Current handling capacity = 7A
• Relay Type Sugar Cube
• Relay Contacts NO, NC and Common.

Number Of Channels	1
Relay Type	SPDT
Voltage Type	AC/DC
Mounting Type	PCB Mount
Brand	Shavison
Coil Voltage	5 V
Current Rating	10 A
Switching Voltage	250 V
Operating Temperature	-40 - 85 degree c
Input Voltage	5 V

5V 30A T Type Relay Module with on board Optocoupler has 30A switching capability and suitable to both DC and AC. Significantly it can be used to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V appliances lights, fans, etc, and similarly even high power motors at lower voltages.

The board uses a high-quality relay subsequently which can handle a maximum of 30A/250 V AC or 30A/125V AC. Each relay has all three connections Common, Normally Open, Normally markedly Closed brought out to 3 pin screw terminals which make it easy to make and remove connections. The board has a relay status LED unlike to ease debugging. The board can accept control inputs within a wide range of voltages from 4V to 12V.

Product Features of 5V 30A T Type Relay:

• Relay Voltage 5V
• Channels = 1
• Optically Isolated = YES
• TTL interface to trigger the relay
• Relay Current handling capacity = 30A
• Relay Type: T90
• Relay Contacts NO NC and Common.

Package Includes:

1 x 5V 30A T Type Relay Module with on board Optocoupler

Video Link for the different types of Relays: