Grow Green Irrigation Systems

• Fine droplet size (50-60 Microns @ 4.0 bar).
• Connected with LPD and push fit / bayonet.
• A secondary filter (75-100 Microns) is required to operate the product.
• High water distribution uniformity and coverage.
• Easy installation and service.

This compact slim-line spray sprinkler comes in 5 cm, 10 cm, and 15 cm models. Its innovative body incorporates a reliable two-piece ratchet, durable cap, male-threaded riser, and large filter screen, providing double filtration on 10 cm and 15 cm models. Additionally, the 5 cm  and 10 cm models are retro-compatible with existing PS Spray bodies, which allow for a quick and easy upgrade. Standard PS Ultra models include a pre-installed Precision Distribution Control nozzle. A Flush Plug version is available without a nozzle or filter screen. With so many compatible nozzles to choose from, finding the most efficient solution for the right application is simple and easy.

• Enhanced cap for more durability, easier handling, and extended riser seal life

• Large inlet filter screen for increased debris resistance

• Check valve option eliminates low-head drainage

• Heavy-duty spring for consistent riser retraction

• Additional Features

• Directional flush plug design for cleaner installation

• Two-piece ratcheting riser

• 5 cm and 10 cm models can retrofit into older style PS models

• Compatible with all female-threaded nozzles

• Standard Pure Polyester / Epoxy coating for Protecting from Corrosion Coated with more than 70 micron thick deep blue colored pure Polyester powder on outer surface & Epoxy coating from inner side for protection against corrosion and weather effects
• Innovative Turbulent Inlet Turbulent inlet ensures thorough mixing of chemicals and / or fertilizers
• Additional fine filter To avoid entry of solid particles in system, Special provision of strainer on the outlet side
• Separate Draining facility available Special Drain port given to flush the tank

• Standard Epoxy Coating for protection from corrosion Coated with more than 70 micron thick light blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects
• Innovative Turbulent Inlet Turbulent inlet ensures thorough mixing of chemicals and / or fertilizers
• Additional fine filter To avoid entry of solid particles in system, Special provision of strainer on the outlet side
• Separate Draining facility available Special Drain port given to flush the tank
• Mild steel construction.
• Separate valves are provided on the inlet & outlet to control the injection rate.
• High pressure hose assembly inlet / outlet connection.
• Wide 8" opening for easy pouring of stock solution.
• Maximum working pressure 10 kg/cm² (142 psi).
• Available in 30, 60, 90, 120 & 160 liter (8, 16, 24, 32 & 42 US gallon) capacity.

• Innovative Compact design Innovative compact design which operated without electricity
• Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided
• Accurate and Proportional Injection Rate For accurate injection, special adjusting lock arrangement provided
• Different options available ON/OFF Knob OR Air Release option available

• Innovative Venturi design Innovative design of convergent, throat and divergent sections of Venturi for more injection rate
• Additional Valve Provided Additional Valve provided for suction side to prevent reverse flow of water
• Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided
• Various Option Available Venturies are available from ¾", 1", 1¼", 1½", 2"

• Compact Design Innovative design manufactured from high performance rigid uPVC compound
• Innovative Float Design Innovative float designed to release the air at start and at end of system
• Large Orifice Opening Large orifice opening facilitates easy expulsion of air and breaking the vacuum
• Equipped With Rubber Seal Equipped with special rubber seal to prevent leakage

• Compact Design Innovative design manufactured from high performance rigid PVC compound
• Easy to Install and Dismantle Two union nuts provided for both ends provides easiness to install and dismantle valve
• Guided Float Slides Smoothly Float is provided with special guides to seal properly
• Non Return Valve with Low Friction Option Can also be supplied with low friction option

• Patented automatic arc return feature returns the turret back to the original arc pattern if vandalised; adjustable arc from 50 to 360

• Non-strippable drive mechanism is protected from damage if turned in the opposite direction of travel

• Part- and full-circle in one model for flexibility across landscapes and reduced inventory

• Colour-coded nozzles make identification easy

• Drain check valve prevents low-head drainage (up to 3 m of elevation)

The I-90 is Hunter’s longest distance rotary sprinkler specifically designed for natural turf, parks, sports fields, and public areas. With a radius up to 30.8 m from a single sprinkler, the I-90 boasts a coverage area no other commercial sprinkler can deliver. Yet, its reduced-size diameter and cushioned rubber cover make it the perfect choice for parks and wide-open lawn areas, as well as perimeter watering of athletic fields and horse arenas. The rotor is also easy to service, with a “jar-top” body cap that allows quick access to the filter screen and check valve with no extra pieces, parts, or tools required. The I-90 is offered in two models: a full-circle opposing-nozzle version or an adjustable arc model, each with color-coded nozzles that can be field-changed to match the specific needs of any large site.

• PressurePort™ technology, forward-facing triple nozzles (I-90), opposing triple nozzles (I-90-ON) create exceptional nozzle uniformity in part- and full-circle applications

• Part- and full-circle in one model provides flexible installation options and reduces inventory (I-90)

• Drain check valve prevents low-head drainage (up to 2 m of elevation)

Hunter HSJ Swing Joints by LASCO, are the product of a proven team with time-tested solutions for the irrigation market. Just as Hunter is the recognized world leader in rotor manufacturing and customer support, LASCO is the recognized world leader in irrigation fittings and customer support.

Heavy duty and built to last in any irrigation system, HSJs are available in a multitude of inlet, outlet, size and length configurations with one perfect for every preference. Pair them one-for-one with any Hunter golf rotor purchase, and golf rotor warranties are extended from three to five years

• Heavy-duty prefabricated PVC swing joints with O-ring seals

• Available in all popular inlet and outlet configurations

• Choose from 12" or 18" lay arm lengths

• Single Top-Out or Triple Top-Out designs

• Unique SnapLok outlet with brass threads offers excellent support and durability for quick coupler installations

• Match HSJ swing joint and Hunter golf rotor purchases to qualify for an upgraded 5-year component exchange golf rotor warranty

This compact, 10-centimeter pop-up sprinkler comes with a pre-installed MP Rotator, which provides up to 30% water savings over traditional nozzles. Add that to a spray body with a reliable two-piece ratchet, durable cap, and large filter screen with double filtration, and you have a tough combination to beat.

• Model (plastic riser): 10 cm

• Flow rate: 0.61 to 16.07 l/min

• Adjustable arc and radius offer timely and accurate settings

• Drain check valve (up to 2 m of elevation)

• Two-piece ratchet

• Zero flow-by wiper seal

• Patented double pop

• Warranty period: 2 years

• Nozzle choices: MP100090, MP200090, MP300090, MP1000360, MP2000360, and MP3000360

The revolutionary MP Rotator features a unique, multi-trajectory rotating stream delivery system that achieves water-conserving results. Rather than simply "spray" water onto landscapes, MP Rotators deliver multiple streams of water at a steady rate. This slower application rate allows water to gently soak into the soil and achieves an even distribution throughout the area being irrigated. This increased efficiency results in 30% less water use when compared to traditional sprays and significantly reduces wasteful runoff. The MP Rotator can be installed onto any conventional spray head body or shrub adapter, transforming them into high uniformity, low precipitation rate sprinklers with matched precipitation at any arc and any radius.

The MP Rotators are a great choice for new systems, as they provide immense range flexibility (from 2.5 m to 10.7 m radius), decrease material costs, and provide better system efficiency. MPs are also perfect for revitalizing older systems-a retrofit can solve both low pressure and poor coverage problems.

• Lowest precipitation rate in the industry of approximately 10 mm/hr

• Matched precipitation for simplified irrigation design and flexibility

• Double-pop feature protects the nozzle from external debris

• High distribution uniformity for a healthy landscape with maximum water efficiency

• Additional Features

• Wind-resistant, multi-stream technology prevents misting

• Adjustable arc only when running for vandal resistance

• Removable filter screen prevents nozzle from clogging

• Colour-coded for easy identification

This entry-level residential controller offers simple operation with "smart" Solar Sync compatibility. With easy-to-configure control for up to 8 stations, including 3 programs and 4 start times each, the X-Core is the perfect solution for residential applications. Plug in the revolutionary Solar Sync ET sensor and the X-Core is converted into a "smart controller," that regulates irrigation runtimes based on locally measured weather. X-Core is also compatible with Hunter remotes for quick, wireless activation of irrigation. Installation, operation and maintenance are designed to be simple while still delivering optimal efficiency or reliability.

• Number of stations:

• 2, 4, 6, or 8 (fixed models)

• Solar Sync accessory saves water based on local weather conditions

• Built-in key lock on outdoor models protects against vandalism

• 3 flexible programs with 4 start times each and up to 4-hour run times

• QuickCheck provides simple diagnostics of faulty field wiring

• Hide Programs setting shows 1 program and 1 start time for simplification

• Suspend irrigation up to 99 days during the off-season

• Short-circuit protection detects wiring faults and skips the station without system damage

• Easy Retrieve memory backs up the full irrigation schedule

• Delay Between Stations for slow-closing valves or pump recharge

• Cycle and Soak prevents water waste and runoff in areas with elevation changes or tight soils

• Seasonal adjustment for quicker schedule adjustments without changing run times

The I-Core is Hunter's controller for demanding commercial and high-end residential applications. Loaded with innovative features like state of the art flow monitoring, quick system overview access, a factory-installed SmartPort, six language capability, and a bold, graphic display, the I-Core should be considered for most high-end irrigation projects. A big reason the I-Core is so unique is its sheer versatility. The plastic cabinet version is expandable from 6 to 30 stations, and the metal cabinet model can handle up to 42. Adding a DUAL two-wire module can even expand station capability to 48. Stainless steel and pedestal models are also available, providing a broad range of enclosure choices. With other add-on options like a ROAM or ROAM XL remote and the built-in conservation-focused Solar-Sync, I-Core's possibilities are all but limitless.

• Number of stations:

• Conventional: 6 to 30 (plastic), 6 to 42 (metal and pedestals)

• With DUAL decoder: up to 48

• 4 independent irrigation programs (8 start times each) allow for customised scheduling

• 12-hour maximum station run time provides flexibility for lower-flow zones

• Any 2 programs can operate simultaneously for more efficient watering

• Sensor inputs:

• 2 (plastic)

• 3 (metal and pedestal)

• 1 P/MV output for pump start relay and master valve activation

• Flow-monitoring capabilities provide real-time water usage data

• Programmable No Water Window prevents all irrigation for a specified time frame

• High-visibility, backlit display with 6 selectable languages

A ruptured pipe or broken sprinkler left undetected can result in substantial damage. Plants and ground cover can be flooded, slopes can be eroded, and hundreds of  liters of water can be wasted. Hunter created the Flow-Clik flow sensor to guard against these damages in the event of a rupture. The Flow-Clik can be programmed at a specified level of flow. It will shut down irrigation if it detects a flow rate higher than the programmed limit. Therefore, the amount of water loss and system damage is substantially reduced in the event of high external leakage. 

• Automatically shuts down entire system if an overflow condition occurs, helping to protect against flood damage and erosion

• Single-button calibration to set highest flow rate

• User-adjustable timing and delay for sensor response

• Compatible with all Hunter AC-powered controllers for a variety of applications

• Multi-colour LED indicates system status and if flow is within limits

Hunter Pro-Spray fixed nozzles are designed to offer the most reliable, accurate fixed-arc spray solution possible. Because of their sturdy construction and outstanding performance reputation, Hunter fixed nozzles have become increasingly popular with contractors. Choose any standard or odd angle, Pro-Spray fixed nozzle configurations deliver uniform distribution from all sides. The optimum droplet size minimizes misting and maximizes coverage. Six radius ranges are available, and each can be reduced for fine-tuning. Finally, our nozzles are color-coded for easy at-a-glance radius identification.

• Clean edges for a defined pattern with better wind resistance

• Large water droplets minimise misting with better uniformity

• Sturdy construction ensures reliable performance

• Colour-coded for easy field identification

For controlled irrigation of small spaces, Hunter offers a complete line of Short Radius Micro Spray Nozzles. The ASABE/ICC 802-2014 Standard defines a micro spray as an emission device with a flow rate of 1.90 l/min or less at the largest area of coverage available when operated at 2.0 bar (200 kPa). As landscaped areas continue to shrink in size, Short Radius Micro Spray Nozzles provide an accurate watering solution for 0.6 m, 1.2 m, and 1.8 m spaces while supporting a robust micro spray system.

• Low flow for controlled irrigation of tight spaces

• Meets micro spray requirement of 114 l/hr max flow at 2.1 bar; 210 kPa

• Built to last for a robust overhead solution for small spaces

To accommodate the needs of narrow planting areas, Hunter offers a wide variety of highly efficient fixed arc strip nozzles. The Strip Pattern Nozzles are designed to ensure accurate coverage of rectangular areas with models including right and left corner strips, center and end strips, and two options for side strips. Built with the same durable construction and materials as all other Hunter products, Hunter Strip Pattern Nozzles provide a reliable and wind-resistant spray solution for challenging spaces.

• Designed for accurate coverage of strip areas

• Available in a variety of models for unique, rectangular spaces

• Built to last in harsh conditions

Hunter Stream Nozzles are a great solution for slopes, ground cover, and shrubbery applications. The multiple streams provide a low application rate of water to the landscape, minimizing runoff while providing even coverage from 2.1 m to 5.3 m across various pressure and radius ranges.

• Low application rate to avoid runoff

• Ideal for slopes, ground cover, and shrub applications

• Multiple streams provide even coverage

• Adjustable arc from 25degree to 360degree for design flexibility

With the ability to compensate for pressure differences, the Hunter bubbler nozzles allow the output of water to remain constant regardless of the input pressure. This allows for acurate application never before achieved in bubblers. The same holds true with the MSBN and 5-CST-B nozzles, designed for deep watering of larger planted areas. While the PCB is a fixed above-ground water emitter, the PCN is compatible with the Pro-Spray spray bodies, and sinks into the ground the same way a pop-up would. With easy installation and the ultimate in reliability, now every plant, shrub, or tree can receive the same amount of water required with no excess runoff or waste.

• Pressure-compensating for constant water flow at any pressure

• Designed for deep watering of planted areas

• 1/2" threaded inlet for easy installation on a 1/2" riser

• Nozzle threaded for use with Pro-Spray

• Warranty period: 2 years

For the maximum in convenience, reliability, and ease of service in a residential valve, the PGV Jar-Top is the solution. With the PGV Jar-Top, it's possible to service a Hunter valve without using any tools. Even with this ease-of-maintenance and operational simplicity, the PGV Jar-Top still delivers quality and performance to handle the demands of any residential system. Choose from a wide range of different configurations for specific installations that vary from region to region. All models feature durable, high-grade, corrosive and UV-resistant PVC construction, glass reinforced jarring and a rugged double-beaded, leak-proof diaphragm with support to prevent stress failure.

• External/internal manual bleed allows for quick and easy activation at the valve

• Double-beaded diaphragm seal design ensures leak-free performance

• Captive bonnet screws eliminate the possibility of lost parts during disassembly

• Triple-tool bonnet screws are compatible with standard or Phillips screwdrivers as well as a nut driver

• Jar-top models provide easy access without tools

• Encapsulated solenoid with captive plunger used on every Hunter valve provides hassle-free service

• Flow control maximises efficiency and prolongs the life of the system

This hard working, heavy-duty valve offers the best features of Hunter's top-of-the-line valves. Built with enough durability to handle the rigors of most residential and light commercial sites, the PGV is available in an array of configurations. For smaller landscape applications, the PGV is available in four 25 mm body configurations: angle, globe, or male x male design. In turn, each model is available in either a flow control or non-flow control version. For larger landscape applications, the PGV comes in both 40 mm and 50 mm globe/angle models (with flow control). All models feature durable high-grade construction and a rugged diaphragm with support to prevent stress failure.

• External/internal manual bleed allows for quick and easy activation at the valve

• Double-beaded diaphragm seal design ensures leak-free performance

• Captive bonnet screws eliminate the possibility of lost parts during disassembly

• Flow control maximises efficiency and prolongs the life of the system

• Triple-tool bonnet screws are compatible with standard or Phillips screwdrivers as well as a nut driver

• Each valve available with globe or angle configuration for convenient placement

• Encapsulated solenoid with captive plunger used on every Hunter valve provides hassle-free service

Press the  Mode button until the arrow is pointing at the Current Time/Day position.

The year will be flashing. Use the  or  buttons to change the year. Press the  button to proceed to setting the month.

The month will be flashing and the  icon will be displayed. Use the  or  buttons to change the month. Press the  button to proceed to setting the day.

The day will be flashing and the  icon will be displayed. Use the  or  buttons to change the day. Press the  button to proceed to setting the time.

The time will be displayed. Use the  or  buttons to select AM, PM, or 24hour. Press the  button to set the hour.

Hours will be flashing. Use the  or  buttons to change the hour shown. Press the  button to move to minutes.

Use the  or  buttons to change the minutes shown. The date, day and time have now been set.

NOTE: One start time will activate all stations sequentially in that program. This eliminates the need to enter each station's start time. Multiple start times in a program can be used for separate morning, afternoon, or evening watering cycles.

Press the  Mode button until the arrow is pointing at Start Times .

Program A will be displayed. (If Program B is desired, press the  button).

Use the  or  buttons to change the start time.

Press the  button to add an additional start time, or  button for the next program.

With the arrow pointing at the Start Times position, press the  or  buttons until you reach 12:00 AM. Push the  button once to reach the OFF position.

Press the  Mode button until the arrow is pointing at Run Times .

Use the  button to select a program (A or B).

Press the  or  buttons to change the station run time from 1 minute to 4 hours. Press the  button to advance to the next station.

Press the  Mode button until the arrow is pointing at Water Days .

Use the  button to select the desired program.

Arrows point at the specific days of the week in which watering is to occur. Press the  button to activate that day or the button to cancel watering for that day.

This feature is uses numbered days of the month for watering instead of specific days of the week (Odd days 1st, 3rd, 5th, etc.; Even days 2nd, 4th, 6th, etc.).

When in the Water Days mode, press the  button until the cursor is above either ODD or EVEN on the display.

Press the   button to select, or the  button to cancel either ODD or EVEN days to water.

You can select interval watering from 1 to 31 days.

When in the Water Days mode, press the  button until the cursor is over INT. Press the  button and the interval watering icon  will be displayed and a 1 will be flashing.

Press the  or  button to select the number of days between watering days (1 to 31 days). This is called the interval.

• Compact Design Innovative compact design manufactured from high performance plastic
• Unique Orifice Design Unique orifice design facilitates easy and quick expulsion of air
• Optional Multiple Air Release Valve Assembly Multiple Air Release Valve assembly option can also be available for bigger size pipe lines
• Pressure Balanced Float Perfect pressure balanced float dynamically removes even small air pockets
• Innovative Double Action Function Continuous acting air release valve that releases air entrapped in the pipeline during start up and while in operation continuously
• Threaded Inlet Connection Threaded inlet connection available for connection with system