X

Gurit India Private Limited

Aundh, Pune, Maharashtra

| GST  27AACCG8343F1ZM

| Verified Supplier

View Mobile Number 60% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Products We Offer

+View All

Epoxy Tooling Resins

Providing you the best range of T-paste 70-2 - Low Density Epoxy Tooling Paste, T-gel 130 - Epoxy Tooling Gelcoat System, T-lam 130 - Epoxy Tooling Laminating System and T-Prime 130 - Epoxy Tooling Infusion System with effective & timely delivery.

MAIN PRODUCT FEATURES     ¬ Compatible with 2KM, Dekumed, Dopag, Graco & Tartler mixing machines¬ Easy to apply at thicknesses up to 40mm on a vertical surface ¬ Low exotherm & shrinkage in thick sections¬ Can be rough machined after 1 day at 21°C / 70°F¬ Excellent machining properties¬ Provides a high quality surface finish for mould or part production¬ Temperature performance up to 85°C / 175°F¬ 20% lower viscosity for easier pumping, lower back pressure and less drag on application
INTRODUCTIONT-Paste 70-2 is a fast and reliable way to manufacture patterns and direct moulds. T-Paste 70-2 is a low density tooling paste formulated for ease of application and to give an excellent surface finish when CNC machined.
T-Paste 70-2 can be applied directly to expanded polystyrene (EPS) and is very low exotherm and shrinkage when applied at thicknesses up to 40mm. This allows the paste to be applied in one operation over large areas. 
T-Paste 70-2 can be CNC machined after a 1 day cure at an ambient temperature of 21°C / 70°F and has outstanding Health and Safety; no smell or volatiles when applied and forms chippings when machined.

View Complete Details

Yes, I am interested!

MAIN PRODUCT FEATURES¬ Thermally stable up to 130°C / 265°F when fully post-cured¬ Resistant to thermal cycling damage¬ Sag resistant to 1mm thickness on vertical surfaces¬ Low shrinkage for accurate mould manufacture¬ Application by roller or brush 
T-Gel 130-1 is an epoxy gelcoat system for manufacturing glass or carbon reinforced mould tools. T-Gel 130-1 is compatible with Gurit’s range of 130°C / 265°F tooling laminating, infusion and repair materials. 
Pre-preg over-coating is not recommended with this system. The formulation has been designed to provide excellent application handling and sag resistance to aid tool manufacturing. As with all epoxy tooling systems, care must be taken to avoid exposure to sunlight to avoid breakdown of the surface.
To ensure sufficient strength for de-mould and maximise gelcoat adhesion a mid cure of 4 hours at 40°C / 104°F is recommended after the ambient cure stage.

View Complete Details

Yes, I am interested!

MAIN PRODUCT FEATURES¬ Thermally stable up to 130°C / 265°F when fully post-cured¬ Low viscosity for wet-out of heavy weight reinforcements¬ Good Health and Safety¬ Low exotherm and extended pot-life makes this product ideal for large or complex moulds¬ Ambient curing and low shrinkage for accurate mould manufacture 
T-Lam 130-1 Slow is an epoxy tooling system for manufacturing glass or carbon moulds by wet laminating. T-Lam 130-1 Slow is part of the 130°C / 265°F tooling systems and is compatible with the range of gelcoats, infusion, and repair materials.
T-Lam 130-1 Slow is a low shrinkage ambient curing system, which simplifies accurate mould manufacture. Designed for laminating and cure at 20°C / 70°F, it should then be mid-cured at 40°C / 105°F for 4 hours to guarantee the strength needed for demoulding. It can then be post-cured off the plug to give a material that is thermally stable to 130°C / 265°F.
Exceeding this temperature will cause a rapid loss in stiffness and a safety margin is required for the maximum tool operating temperature to prevent distortion or tool damage.       

View Complete Details

Yes, I am interested!

MAIN PRODUCT FEATURES¬ Thermally stable up to 130°C / 266°F when fully post-cured
¬ Resistant to thermal cycling damage
¬ Low initial mixed viscosity for easier infusion; 247 cP at 25°C / 77°F
¬ Long pot-life and gel time; capable of infusing large or complex moulds
¬ Ambient curing and low shrinkage for accurate mould manufacture
T-Prime 130-1 is an epoxy tooling system for manufacturing glass or carbon moulds from liquid infusion processes. T-Prime 130-1 is compatible with Gurit’s range of 130°C tooling gelcoat, laminating and repair systems.
T-Prime 130-1 is a low shrinkage ambient curing system, which provides a simple way to produce high accuracy moulds. Designed for infusion and cure at ambient temperatures, it should then be mid-cured at 40°C /  104°F for 4 hours to guarantee the strength needed for demoulding. It can then be postcured off the plug to give a material that is thermally stable to 130°C / 266°F. 
Exceeding this temperature will cause a rapid loss in stiffness and a safety margin is required for the maximum tool operating temperature to prevent distortion or tool damage.
T-Prime 130-1 is a further improvement on T-Prime 130 giving improved storage stability and an extended pot-life.

View Complete Details

Yes, I am interested!
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
I agree to the terms and privacy policy