X

Gurit India Private Limited

Aundh, Pune, Maharashtra

| GST  27AACCG8343F1ZM

| Verified Supplier

View Mobile Number 60% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Products We Offer

+View All

FIRE, SMOKE AND TOXICITY RETARDANT PREPREGS

Manufacturer of a wide range of products which include Laminating & Infusion Systems, Ampreg 26 Epoxy Laminating System, Prime 20ulv Ultra Low Viscosity Epoxy Infusion, Prime 27 Premium Epoxy Infusion System, Sp 320 - Solvent Free Clear Epoxy Coating and AMPREG 21FR - BS476 Class 2 Laminating System.

The Ampreg range of wet laminating systems allows the selection of the appropriate product for a given application giving the required mechanical properties, thermal and chemical resistance. Each system in the range has a number of hardeners which allow for rapid gelation for small repair to exceptionally long for the manufacture of large sandwich structures, even in high ambient temperatures. 
The PRIME™ infusion range of products, and their respective hardeners, combines low viscosity and flexible gel times to allow the manufacture of a huge range of items in a wide range of working environments. These times range in shape and complexity from huge domes, highly stressed carbon masts, wind turbine blades up to 40m (130ft), boat hulls for racing and  long distance cruising with the clock tower at mecca being a high point.
PRIME™  products are suitable for all “under the bag” infusion processes including:
¬ SCRIMP – Seemans Composites Infusion Moulding Process ¬ RIFT – Resin Infusion under Flexible tooling ¬ VARTM – Vacuum Assisted Resin Transfer Moulding ¬ RTM – Resin Transfer moulding 

View Complete Details

Yes, I am interested!

MAIN PRODUCT FEATURES
¬ Optimum mechanical performance
¬ High Tg's from elevated temperature cures
Ampreg 26 is Gurit’s premium epoxy laminating system, and is particularly suitable for the manufacture of large, high performance composite structures. The product’s high laminate mechanical properties and high Tg’s achievable from modest postcures, make it well suited for heavily loaded applications, particularly those where a little extra thermal performance is required. Ampreg 26 is optimised for use in hand-lay up and vacuum bagging processes, but can also be used in other processes such as RTM, vacuum infusion, pultrusion and filament winding.
Ampreg 26 is recognised worldwide as the premium laminating system for the manufacture of racing sailboats, and high performance, one-off cruising boats. It has been selected by the RNLI in the UK for the wet lay-up components of their high-speed coastal rescue vessels, and it is in use on the VSV rapid troop insertion craft, in service with the UK’s SBS and US Marine Corps.
Ampreg 26 may also be used with the separate Ampreg Ultra Slow hardener to provide flow times under vacuum of up to 9 hours at 20°C.          

View Complete Details

Yes, I am interested!

MAIN PRODUCT FEATURES¬ Fast infusion times¬ Gives higher quality, lower cost parts¬ Excellent toughness at ambient only cures¬ Ideal for production boatbuilders, combining polyester gelcoats with epoxy backing laminates
PRIME™ 20ULV is an ultra low viscosity epoxy infusion system, which utilises PRIME™ 20LV resin with a slow (ULV) hardener. The low viscosity of PRIME™ 20ULV results in fast infusion times, less resin feed lines (reduced resin waste & infusion setup times) and easier wet-out of dry reinforcements leading to higher quality, lower cost parts.

View Complete Details

Yes, I am interested!

MAIN PRODUCT FEATURES¬ The lowest viscosity PRIME™ infusion resin¬ Suitable for infusing structures that utilise carbon, aramid and glass fibres¬ Very low exotherm in thick sections
PRIME™ 27 offers outstanding performance in a variety of liquid infusion processes. It is Gurit’s premium infusion system, offering high mechanical and thermal properties, lower viscosity, improved wetting out and longer working time than PRIME™ 20LV. It achieves excellent mechanical and physical properties, including a high Tg from a moderate (50°C / 120°F) post-cure.
PRIME™ 27 resin uses PRIME™ 20 hardeners to give a range of working times and cure speeds. This enables the gel time of the resin to be closely matched to the required infusion time for any particular size of moulded part. The system has an exceptionally low exotherm characteristic, which allows thick sections to be manufactured without risk of premature gelation due to exothermic heat build-up. This low exotherm will also extend the life of mould tools.
TYPICAL APPLICATIONSPRIME™ 27 is suitable for the female moulding of large, complex components including spars, hulls and reinforcing structures.
PACK SIZES & AVALABILITYPRIME™ 27 is available in 20/5.2, 220/19 and 1000/180kg resin/hardener quantities for machine mixing/dispense.                   

View Complete Details

Yes, I am interested!

MAIN PRODUCT FEATURES¬ Easy application¬ Excellent clarity¬ High film-build
SOLVENT FREE EPOXYSP 320 is a solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to. When used for coating wood, just a few coats will provide both protection and a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish.
MULTI-PURPOSE SYSTEMThe epoxy coating will protect most surfaces from moisture ingress, and will also add strength to softwood surfaces. On horizontal surfaces, SP 320 may be poured on as a flow-coat, providing an instant, thick coating layer in just one application. If the coating is to remain unpainted, the cured material should be overcoated with any good two pack polyurethane, since an unprotected epoxy coating will gradually yellow in sunlight.          GLASS REINFORCEMENTDue to its low viscosity, and excellent wetting characteristics, SP 320 may also be used with lightweight glass reinforcements, such as RE210D, to provide a clear, sheathing layer. When this is further coated with extra layers of SP 320, the result is a glass-reinforced clear coating which is exceptionally strong and hard-wearing.        FURTHER USESWhilst primarily designed as a coating, SP 320 is completely solvent-free and so can be mixed with Gurit's Filler range to produce filling compounds, adhesives and fillet mixes. Some information about the filler range, and how to use the fillers, is contained in the datasheet.         

View Complete Details

Yes, I am interested!

MAIN PRODUCT FEATURES
¬ Up to 10 hours working time at 25°C / 77°F
¬ ideal for laminating large composite structures
¬ Meets BS476 part 6 & 7 class 2
¬ Meets UL94 V0 rating
¬ Low initial mixed viscosity for fibre/fabric wet-out
¬ Low exotherm & shrinkage
Ampreg 21FR has been optimised for the manufacture of large composite structures using hand layup, and vacuum bagging techniques.  
Ampreg 21FR has been designed to give excellent mechanical and thermal properties from both ambient temperature cures, and moderate temperature postcures (50°C / 120°F).  
This system uses Ampreg 21 hardeners and is available with a range of hardener speeds, from Fast to Ultra Slow.
TYPICAL APPLICATIONSLaminating of large composite structures for infrastructure, marine and rail applications.

View Complete Details

Yes, I am interested!
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
I agree to the terms and privacy policy