Hach DHR India Private Limited

Brand	Hach
Power	12 VDC, 400 mA maximum (supplied by the controller)
Alerts	Low and high chlorine. Dirty cell. Low and high sample flow.
Controller Compatibility	SC200, SC1000, SC1500, SC4200c
Cycle Time	2.5 minutes
Dimensions	342 mm x 329 mm x 177 mm (H x W x D)
Drain	1/2-inch ID flexible hose
Enclosure Rating	IP66
Inlet	1/4-inch OD polyethylene tube, quick-disconnect fitting
Installation Kit	Standpipe Installation Kit
Light Source	LED, measurement at 510 nm, 1 cm light pathlength
Lower Limit of Detection (LOD)	0.03 mg/L
Mounting	Wall mount
Operating Humidity	0 - 90% relative humidity, non-condensing
Operating Temperature Range	5 - 40 DegreeC
Parameter	Chlorine, free
Range	0 -10 mg/L Cl2
Reagent Consumption	0.5 L of buffer solution and 0.5 L of indicator solution in 31 days
Sample Flow Rate	60 - 200 mL/min through the instrument
Sample Requirements	Y-strainer filtration with 40-mesh screen or higher
Warranty	EU: 2 years, US and other geographies: 1 year
Weight	4.1 kg

The Next Standard in Chlorine AnalysisThe CL17sc online chlorine analyser extends Hach's decades-long legacy as the leader in online chlorine analysis. It uses EPA-approved colorimetric DPD analysis to deliver accurate and reliable measurements of free or total residual chlorine. Whether you use online chlorine measurements to optimise your process or report to regulatory agencies, the CL17sc is the analyser you can trust.

Connection to Hach's SC controller platform gives you more flexibility to transfer, store, and interact with your chlorine measurement data, resulting in better understanding and control of your process, more cost-effective decision-making, and greater peace of mind that your data is always there no matter what happens.

A built-in flow meter, three-colour status light, LED measurement cycle lights, and colorimeter window allow you to quickly and efficiently see that your CL17sc is functioning properly.

The CL17sc can also be used with Hach's Claros Water Intelligence System. With the innovative Claros Mobile Sensor Management, you can view measurements and instrument status anytime, anywhere, on any web-enabled device. Alerts for upcoming maintenance and issues requiring immediate attention are all in the palm of your hand. Detailed, step-by-step illustrated instructions for routine maintenance tasks also allow you to feel confident that you have performed routine maintenance correctly.

• Accurate, reliable online measurement of free or total residual chlorine
• Compliant with US EPA 40 CFR 141.74
• On-screen, guided workflows for routine maintenance tasks
• Comprehensive diagnostic features, including built-in flow meter, multi-colour status light, and colorimeter window
• Available Claros Mobile Sensor Management for measurement data and instrument status anytime, anywhere

Maintenance made easy
The CL17sc reduces your routine maintenance touch time with programmable alerts, simplified tubing replacement, and step-by-step maintenance instructions.

Peace of mind through comprehensive diagnostics
With upgraded features like a flow meter, colorimeter window, multi-colour status light, and predictive diagnostic software, you know your instrument is operating as intended.

Expanded connectivity. Increased flexibility.
By pairing the CL17sc with Hach’s SC controller platform, your options increase significantly: internal data logging; external analogue and digital communication alternatives; and multi-parameter instrument flexibility.

The CL17sc is compliant with US EPA regulation 40 CFR 141.74. Both Method 4500-CL G and Method 334.0 can be used for measuring residual chlorine in drinking water.

What's included?
CL17sc Chlorine Analyser with 1 Month Supply of Free Chlorine Reagents, Standpipe Installation Kit, and User Manual. User provides screws and/or anchors for mounting.

Hach SC controller is required for operation and is sold separately.

Accuracy:
± 5% or ± 0.04 mg/L (whichever is greater) from 0 - 5 mg/L Cl???
± 10% from 5 - 10 mg/L Cl???

Air Purge:
Optional with 3/8-inch quick-connect fitting and tubing; 0.003 m3/min at 1.38 bar maximum

Certifications:
CE compliant with: EN 61326-1, CISPR 11, EN 50581
ACMA RCM
South Korea KC Certificate
North America: FCC Supplier’s Declaration of Conformance, IEC/EN 60529, ICES-003

Inlet Pressure:
0.3 - 5.2 bar supplied to Y-strainer
0.1 - 0.3 bar supplied to analyser

Interferences:
Other oxidising agents such as bromide, chlorine dioxide, permanganate, and ozone will cause a positive interference. Hardness must not exceed 1,000 mg/L CaCO2.

Brand	Hach
Warranty	1 Year
Weight	10.28 kg Approximately 5.5 kg (12 lbs) Panel and empty panel-mounted components only
Cable Connection	5 pin, M12 connector
Cable Length	1 m (between gateway and sc controller)
Calibration Method	1-point or 2-point (zero and slope) calibration
Connection Drain Line	1/2 in ID
Connections	1/4 in OD
Controller	Panel only
Controller Compatibility	SC controller platform
Dimensions	195 mm x 25 mm (7.68 in x 0.98 in), Sensor Only: 195
Fitting Type	USA
Includes	CL10sc Panel, 1 m digital extension cable, Panel Manual, Chlorine Sensor Manual.
Length	Sensor: 195 mm
Lower Limit of Detection (LOD)	30 ppb (0.03 ppm)
Material	Corrosion-resistant materials, fully-submersible
Measurement Method	Reagentless, electrochemical, three-electrode amperometric system
Mounting	Panel or Wall Mounting
Operating Temperature Range	0 - 45 DegreeC
Options	Panel Only
Parameter	Free Chlorine
pH Range	4 - 9
Pressure Range	0.5 bar, no pressure impulses and/or vibrations
Range	0 - 20 ppm Cl2
Region	US
Repeatability	30 ppb or 3%, whichever is greater
Sample Flow Rate	30 - 50 L/h (7.9 - 13.2 gal/hour), Optimal is 40 L/hour (10.5 gal/hour)
Sample Temperature	5 - 45 DegreeC (41 - 113 DegreeF)
Ship Wt. (lbs)	9.1
Storage Conditions	-20 DegreeC to 60 DegreeC dry

Do you need reliable, real-time chlorine analysis to optimise your disinfection process or to report to regulatory agencies?The CL10 sc reagentless chlorine analyser allows for real-time control of disinfection processes by providing continuous readings that indicate when treatment conditions have changed. A measurement range from 0-20 ppm ensures process control in a wide range of disinfection applications.

The CL10 sc analyser uses Hach's exclusive Cal Watch self-diagnostics to alert users when the process has changed or the instrument needs servicing. Diagnostic features include warning of pH and chlorine calibration deviation and a non-contacting flow sensor for notification of insufficient sample flow.

Do you need a reagentless solution for your online chlorine analysis?
Free or total chlorine measurement with an amperometric analyser, such as the CL10 sc, does not require reagents, thus eliminating the need for routine reagent replacement and waste stream management.

Hach’s CLF10 sc and CLT10 sc provide online amperometric solutions for real-time analysis of free or total chlorine in disinfection applications.
The CLF10 sc Free Chlorine Analyzer and CLT10 sc Total Chlorine Analyzer measure free or total chlorine continuously for real time process control. It is based on amperometric technology and is fully compatible with all of Hach's digital controllers. The CLF10 sc can be used in most municipal and industrial applications, and is best utilized where waste stream management is a constraint.

EPA-approved Free or Total Chlorine Analysis
The CLF10 sc and CLT10 sc chlorine analyzers are compliant with EPA Method 334.0, ensuring that you not only have precise process control, but reportable results as well.

No Reagents to Replace, No Waste Stream
Hach’s amperometric chlorine technology does not use reagents, eliminating the need for a sanitary drain and saving you the cost of monthly reagent replacement.

Chlorine Analysis Made Easy
The CLF10 sc and CLT10 sc are plug-and-play with Hach’s digital controllers, ensuring easy setup. Available with exclusive self-diagnostics, these instruments will alert the user to changes in the process or upcoming maintenance. Hach’s Cal Watch feature will provide a warning for pH or chlorine calibration changes, and a non-contacting flow sensor will notify users of insufficient sample flow.

Accuracy:
Free Chlorine: ± 3 % of the reference test** (DPD) at constant pH less than 7.2 (±0.2 pH unit)

Accuracy 2:
Free Chlorine: ± 10 % of the reference test** (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)

Accuracy 3:
Total Chlorine: ± 10 % of the reference test** (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)

Accuracy 4:
Total Chlorine: ± 20 % of the reference test** (DPD) at stable pH greater than 8.5

Certifications:

CE compliant for conducted and radiated emissions:

• CISPR 11 (Class A limits)
• EMC Immunity EN 61326-1 (Industrial limits)

Additional certifications when connected to an sc controller

Interferences:
Free chlorine: monochloramine, chlorine dioxide, ozone, and chalk deposits.Total chlorine: chlorine dioxide, ozone and chalk deposits

Response time:
Free Chlorine: 140 s or less for 90% change (T90)
at a stable temperature and pH

Brand	Hach
Display Type	LCD, 3 to 1/2 -digit measurement readout and six-character alphanumeric scrolling
Power Requirements	2.5 A, 50/60 Hz, 100 - 115/230 V AC
Accuracy	+- 10 % or +-0.10 mg/L whichever is greater
Air Purge	0.1 cfm at 20 psig
Calibration Method	5.0 mg/L fluoride standards
Compliance Certifications	CE approved, ETL listed to UL 1262, ETL certified to CSA 22.2 No. 142
Cycle Time	4.2 min
Dimensions	34.3 mm x 41.9 mm x 19.1 mm (H x W x D)
Drain Fitting	1/2-inch ID flexible hose
Inlet	1/4-inch OD polyethylene tubing, quick-disconnect fitting
Inlet Pressure	1 to 10 psig (use sample restriction device to reduce higher pressure samples)
Lower Limit of Detection (LOD)	0.10 mg/L 0.10 ppm
Mounting	Wall mount
Operating Humidity	90 % at 40 DegreeC
Operating Temperature Range	5 - 40 DegreeC
Power	Selectable, 90 VA max.
Range	0.1 - 10.0 mg/L Fluoride
Recorder Outputs	An isolated output of the recorder, from 4 to 20 mA (can be set from 0 to 20 mA)
Sample Flow Rate	200
Sample Temperature	5 - 40 DegreeC (41 - 104 DegreeF)
Storage Conditions	-40 to 60 DegreeC (-40 to 140 DegreeF) without reagents

The CA610 Fluoride Analyzer uses advanced ion-selective electrode (ISE) technology for continuous monitoring of fluoride concentration in drinking water effluent. Accuracy is ensured with precise control of temperature, ionic strength, and pH. Interferences that can bias measurements are virtually eliminated with this electrode.

The electrode of the CA610 analyzer is made with a molded fluoride crystal tip. Electrodes are equipped with BNC connectors so that they can be independently checked with laboratory electrochemical meters.

The ISE system of the CA610 analyzer includes a reference pH electrode and a working electrode. Three reagents are used: Total Ionic Strength Adjustment Buffer (TISAB) solution and two fluoride standards. The Ionic strength adjustment lets the electrode respond to concentration instead of activity. The pH control ensures fluoride is present in its ionic state. The Weak complexes formed by certain metals (for example, aluminum) are broken up by TISAB and chelates potential interferents for accurate fluoride measurement.

Two calibration standards are fully enclosed in the CA610 analyzer's case. The instrument performs a 2-point calibration at 0.5 and 5.0 mg/L fluoride at user-selected time intervals. Automatic calibration intervals can be set for 1 day to 1 month. 

Ion-selective electrode with patented, replaceable tip. Automatic calibration. Temperature-controlled wall-jet flow cell. Rugged, lightweight enclosure. Ultra-low reagent consumption. 

Reliable, Full-time Fluoride Monitoring
The CA610 Fluoride Analyzer uses advanced ion-selective electrode (ISE) technology for continuous monitoring of fluoride concentration in drinking water effluent. Accuracy is ensured with precise control of temperature, ionic strength, and pH. Interferences that can bias measurements are virtually eliminated with this electrode.

Patented Electrode Design with Replaceable Tip
The proven ISE technology of the electrode is enhanced by a patented* design and manufacturing process. The lanthanum crystal at the tip of the probe is molded into a one-piece, monolithic tip that is threaded for easy removal. This prevents errors and premature failures. Electrodes are equipped with BNC connectors so that they can be independently checked with laboratory electrochemical meters.

Cost Effective Operation
The electrode of the CA610 analyzer is made with a molded fluoride crystal tip. The working life of the electrode is approximately one year. The specially designed tip of the electrode should be replaced every six months. Reagent consumption is very low and maintenance is simple.

Method of Analysis
The ISE system of the CA610 analyzer includes a reference pH electrode and a working electrode. Three reagents are used: Total Ionic Strength Adjustment Buffer (TISAB) solution and two fluoride standards. The TISAB is used for the following purposes. The Ionic strength adjustment lets the electrode respond to concentration instead of activity. The pH control ensures fluoride is present in its ionic state. The Weak complexes formed by certain metals (for example, aluminum) are broken up by TISAB and chelates potential interferents for accurate fluoride measurement.

Automatic Calibration
Two calibration standards are fully enclosed in the CA610 analyzer's case. The instrument performs a 2-point calibration at 0.5 and 5.0 mg/L fluoride at user-selected time intervals. Automatic calibration intervals can be set for 1 day to 1 month. Readings and calculations of the most recent calibration is stored in the instrument.

Alarm:
Two alarms, selectable for sample concentration, system warning or system shutdown. Each alarm equipped with an SPDT relay with contacts rated for 5 A resisitive load at 230 Vac.

Brand	Hach
Usage/Application	Pure water / Power
Warranty	1 Year
Weight	20 kg (45 lb) without reagents and standards, 36.3 kg (80 lb) with reagents
Power Requirements	50/60 Hz, 100 - 240 VAC
Controller Compatibility	sc200, sc1000
Enclosure Rating	IP56 / NEMA 4X
Grab Sample	Grab Sample In and Grab Sample Out capability
Light Source	Class 1M LED (light emitting diode) with a peak wavelength of 810 nm
Lower Limit of Detection (LOD)	LR model: 4 micro g/L, HR model: 200 micro g/L
Measuring Principle	Colorimetric
Mounting	Wall, panel or table
Number of Channels	1
Operating Humidity	5 - 95 % non-condensing (indoor use only)
Operating Temperature Range	5 - 45 DegreeC
Output	4 - 20 mA
Parameter	Low Range Phosphate
Pollution Degree	2/II
Protection Class	I
Range	4 - 3000 micro g/L as PO4
Reagent Consumption	2 L of each reagent every 90 days with 15 minute cycle time
Relays	Four; type: not powered SPDT relays, each rated at 5 A resistive, 240 VAC maximum
Response Time	Typically, 9.5 minutes at 25 DegreeC (77 DegreeF); changes with temperature
Sample Flow Rate	55 - 300 mL/min
Sample Pressure	2 - 87 psi (to Preset Pressure Regulator)
Sample Temperature	5 - 50 DegreeC (41 - 122 DegreeF)
Storage Conditions	-20 - 60 DegreeC

Lower Maintenance, Less Downtime.
The 5500 SC Phosphate Analyser requires only two liters of reagent for the analyser to perform unattended for up to 90 days; twice as long as the Series 5000. The industry's only pressurised reagent delivery system eliminates the frequent maintenance associated with pumps. Predictive diagnostic tools, including Hach's proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime. No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the colour-coded cap to the sealed reagent bottle and twist gently. Grab Sample In and Grab Sample Out features allow quick analysis of a grab sample poured into the analyser, and facilitate taking a sample out of the analyser to verify in a lab test.

90 Days of Continuous Run Time
Only two liters of reagent are required for the analyzer to perform unattended for up to 90 days; twice as long as the Series 5000.

Save Time on Maintenance
The industry's only pressurized reagent delivery system eliminates the frequent maintenance associated with pumps.

Avoid Downtime
Predictive diagnostic tools, including Hach's proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime.

Clean, Fast and Easy Reagent Change
No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the color-coded cap to the sealed reagent bottle and twist gently.

Verify Easily with Hach Lab Products So You Don't Waste Time Second-guessing
Grab Sample In and Grab Sample Out features allow quick analysis of a grab sample poured into the analyzer, and facilitate taking a sample out of the analyzer to verify in a lab test.

What's included?
5500sc analyzer, reagents set for up to 90 days of use, installation kit, Hach user manuals.

Accuracy:
LR model: ±4 µg/L or ±4% of reading, whichever is greater;
HR model: ±500 µg/L or ±5% of reading, whichever is greater

Alarm:
Four relays output; type: not powered SPDT relays, each rated at
5 A resistive, 240 VAC maximum
Connection: 18 to 14 AWG wire, 18 AWG stranded recommended

Certifications:
CE (EN 61326-1: 2006; EN 61010-1: 2010; EN 60529: 1991, +A1:2000 )
KC (EN 61326-1: 2006)
C-tick (EN 61326-1: 2006)
cETLus (UL 61010-1: 2012; NEMA 250: 2003; CSA C22.2 No 61010-1: 2012)

Fitting type:
Sample line and sample bypass drain: 6 mm (¼-in.)

Air purge inlet: 6 mm (¼-in.) Chemical and case drains: 9.5 mm (3/8-in.)

Manual Languages:
English, French, Spanish, B. Portuguese, Chinese, Japanese, Korean, Thai, German, Italian, C. Portuguese, Czech, Danish, Dutch, Polish, Swedish, Finnish, Bulgarian, Hungarian, Romanian, Lithuanian, Russian, Turkish, Slovak, Slovenian, Croatian, Greek, Estonian

Repeatability:
LR model: ±1%
HR model: ±500 µg/L or ±5% of reading, whichever is greater

Brand	Hach
Usage/Application	Pure water / Power
Warranty	1 Year
Weight	20 kg (45 lb) without reagents and standards, 36.3 kg (80 lb) with reagents
Power Requirements	100 - 240 VAC
Controller Compatibility	sc200, sc1000
Dimensions	804 mm x 452 mm x 360 mm (H x W x D)
Enclosure Rating	IP66 / NEMA 4X
Fitting Type	Sample line and sample bypass drain: 6 mm (1/4-in.)
Grab Sample	Grab Sample In and Grab Sample Out capability
Light Source	Class 1M LED (light emitting diode) with a peak, wavelength of 810 nm
Lower Limit of Detection (LOD)	LR model: 4 micro g/L, HR model: 200 micro g/L
Measuring Principle	Colorimetric
Mounting	Wall, panel or table
Number of Channels	1, 2, 4; 1
Operating Humidity	5 - 95 % non-condensing (indoor use only)
Operating Temperature Range	5 - 45 DegreeC
Output	4 - 20 mA
Parameter	Low Range Phosphate
Pollution Degree	2/II
Protection Class	I
Range	4-5000 micro g/L as PO4;
Reagent Consumption	2 L of each reagent every 90 days with 15 minute cycle time
Region	US
Relays	Four; type: not powered SPDT relays, each rated at 5 A resistive, 240 VAC maximum
Repeatability	LR model: +-1%, HR model: +-500 micro g/L or +-5% of reading, whichever is greater
Response Time	Typically, 9.5 minutes at 25 DegreeC (77 DegreeF); changes with temperature
Sample Flow Rate	55 - 300 mL/min
Sample Pressure	2 - 87 psi (to Preset Pressure Regulator)
Sample Temperature	5 - 50 DegreeC (41 - 122 DegreeF)
Storage Conditions	-20 - 60 DegreeC

Only two liters of reagent are required for the analyser to perform unattended for up to 90 days. The industry's only pressurized reagent delivery system eliminates the frequent maintenance associated with pumps. Predictive diagnostic tools, including Hach's proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime. No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the colour-coded cap to the sealed reagent bottle and twist gently. Grab Sample In and Grab Sample Out features allow quick analysis of a grab sample poured into the analyser, and facilitate taking a sample out of the analyzer to verify in a lab test.

Lower maintenance, less downtime
Reliable online low range phosphate analyzer that saves critical time and effort. Available with 1/2/4 channels and including reagents set for start up and up to 90 days of use. Open chemistry.

90 days of continuous runtime
Only two liters of reagent are required for the analyzer to perform unattended for up to 90 days; twice as long as the Series 5000.

Save time on maintenance
The industry's only pressurized reagent delivery system eliminates the frequent maintenance associated with pumps.

Avoid downtime
Predictive diagnostic tools, including Hach’s proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime.

Verify easily with Hach Lab products so you don't waste time second-guessing
Grab Sample In and Out features allow quick analysis of a grab sample poured into the analyzer, and facilitate taking a sample out of the analyzer to verify in a lab test.

Accuracy:
LR model: ±4 µg/L or ±4% of reading, whichever is greater;
HR model: ±500 µg/L or ±5% of reading, whichever is greater
(Tested with Hach reagents)

Alarm:
Four relays output; type: not powered SPDT relays, each rated at
5 A resistive, 240 VAC maximum
Connection: 18 to 14 AWG wire, 18 AWG stranded recommended

Certifications:
CE (EN 61326-1: 2006; EN 61010-1: 2010; EN 60529: 1991, +A1:2000 )
KC (EN 61326-1: 2006)
C-tick (EN 61326-1: 2006)
cETLus (UL 61010-1: 2012; NEMA 250: 2003; CSA C22.2 No 61010-1: 2012)

Manual Languages:
English, French, Spanish, B. Portuguese, Chinese, Japanese, Korean, Thai, German, Italian, C. Portuguese, Czech, Danish, Dutch, Polish, Swedish, Finnish, Bulgarian, Hungarian, Romanian, Lithuanian, Russian, Turkish, Slovak, Slovenian, Croatian, Greek, Estonian

Brand	Hach
Weight	Without sample preparation system and without chemicals: 31 kg
Power Requirements	50 Hz, 115 - 230 V AC, powered by Power Box or SC Controller
Accuracy	Using standard solutions: 2% +- 0.05 mg/L
Cable Length	2 m fixed data cable at analyzer
Channels	1
Data Transfer	Current output, relays and bus communication via SC controller
Dimensions	720 mm x 540 mm x 390 mm (H x W x D)
Enclosure Rating	IP55
Filtersystem Included	No, use e.g. Filtrax
Flow	1 - 20 L/h Sample (free of suspended solids)
Fuse Protection	Via SC1000 controller or power box. Maximum of 2 analysers per SC1000 or power box
Lower Limit of Detection (LOD)	0.05 mg/L PO4-P
Material	ASA/PC UV-resistant
Measurement Method	Photometric method using vanadate-molybdate.
Measuring Interval	5 - 120 min, adjustable per 5 min.
Measuring Principle	Phosphate ions react with vanadate-molybdate reagent to form a yellow dye.
Number of Channels	1
Operating Temperature Range	-20 - 45 DegreeC
Output	Current output, relays and bus communication via SC controller
Parameter	Ortho-Phosphate
Permissible Chloride Range	Max. Cl- concentration: 1000 mg/L
pH Range	5 - 9 pH
Power Supply	115-230 VAC
Pressure Range	-30 - 50 mbar with continuous sample preparation; at overflow vessel
Range	0.05 - 15.0 mg/L PO4-P
Reagent Consumption	500 mL/month
Region	US
Reproducibility	2 % + 0.05 mg/L
Response Time	< 5 min
Sample Delivery Hose Options	Outdoor
Sample Level	Level of liquid in basin with filtration probe must be below analyzer
Sample Quality	Ultra filtrated or comparable
Sample Temperature	4 - 40 DegreeC (39 - 104 DegreeF)
Sampling Option	1 channel continuous sample from filtration unit, e.g. Filtrax
Storage Conditions	-20 - 60 DegreeC (-4 - 140 DegreeF), 95% relative humidity, non-condensing

The Phosphate Analyzer has low detection limit of 0.05 mg/L, is environmentally controlled for rugged, outdoor installations, and designed specifically for easy installation at the measurement point. It provides a wide measurement range for a variety of wastewater applications. Automatic cleaning and calibration every day. Easy access to reagents and wear parts.

Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.

Phosphax SC must be connected to an SC1000 to form a complete loop.

This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.

Multiple measurement ranges for a variety of wastewater applications
With detection limits as low as 0.05 mg/L and as high as 50 mg/L, the Phosphax sc phosphate analyzer can be used anywhere in the wastewater treatment process, from the influent or start of the phosphorous removal process where phosphate levels may be high to the effluent where phosphate levels are at their lowest.

Low cost of operation with proven yellow method
The Phosphax sc analyzer determines ortho-phosphate concentration using the molybdovanadate yellow colorimetric method which optimizes reagent consumption and helps save on operating costs.

Generate actionable insights from measurement data
The Phosphax sc is Claros enabled so you can leverage the Hach Water Intelligence System to collect, manage and analyse data from your instrument.

Easy installation at the measurement point
Hach's Phosphax sc phosphate analyzer is designed to be installed at the measurement point (indoor and outdoor options). The housing is weatherproof and lockable for installation at the basin, even in the toughest climates. Mounting options include: wall, rail, or standing. The unit comes complete and assembled; no separate housing is required.

Low maintenance
Several features make the Phosphax sc phosphate analyzer easy to use and maintain:

• Automatic cleaning at customized intervals.
• Automatic zero-calibration at each measuring cycle.
• Prognosys Predictive Diagnostics alerts you to upcoming instrument issues and guides you on whether the changes in your measurements are due to your instrument or your water.
• Easy access to reagents and wear parts.

What's included?
0.05 - 15 mg/L PO4-P, 115-230 VAC PHOSPHAX sc Ortho-Phosphate Analyzer, for one channel continuous sample, 3 month supply of all necessary consumables at 5 minute cycle time, user manuals

Brand	Hach
Usage/Application	Pure water / Power
Parameters	Silica
Warranty	1 Year
Weight	20 kg (45 lb) without reagents and standards, 36.3 kg (80 lb) with reagents
Power Requirements	50/60 Hz, 100 - 240 VAC
Controller Compatibility	SC200, SC1000
Enclosure Rating	IP56 / NEMA 4X
Grab Sample	Grab Sample In and Grab Sample Out capability
Light Source	Class 1M LED (light emitting diode) with a peak wavelength of 810 nm
Lower Limit of Detection (LOD)	0.5 micro g/L
Measuring Principle	Colorimetric
Mounting	Wall, panel or table
Number of Channels	1
Operating Humidity	5 - 95 % non-condensing (indoor use only)
Operating Temperature Range	5 - 45 DegreeC
Output	4 - 20 mA (4x)
Pollution Degree	2/II
Protection Class	I
Range	0 - 5000 micro g/L as SiO2
Reagent Consumption	2 L of each reagent every 90 days with 15 minute cycle time
Region	US
Relays	Four; type: not powered SPDT relays, each rated at 5 A resistive, 240 VAC maximum
Repeatability	+- 0.5 micro g/L or +- 1 % of reading, whichever is greater
Response Time	Typically, 9.5 minutes at 25 DegreeC (77 DegreeF); changes with temperature
Sample Flow Rate	55 - 300 mL/min
Sample Pressure	2 - 87 psi (to Preset Pressure Regulator)
Sample Temperature	5 - 50 DegreeC (41 - 122 DegreeF)
Storage Conditions	-20 - 60 DegreeC

Lower Maintenance, Less Downtime
The 5500 sc silica analyzer needs only two liters of reagent to perform unattended for up to 90 days; twice as long as the Series 5000. The industry's only pressurized reagent delivery system eliminates the frequent maintenance associated with pumps. Prognosys which is a predictive diagnostic system allows you to be proactive in your maintenance. Warning LEDs, and high-visibility notification screens let you avoid unplanned downtime. No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the color-coded cap to the sealed reagent bottle and twist gently. Grab Sample In and Grab Sample Out features allow quick analysis of a grab sample poured into the analyzer, and facilitate taking a sample out of the online silica analyzer to verify in a lab test.

90 Days of Continuous Run Time
Two liters of reagent are required for the silica analyzer to perform unattended for up to 90 days; twice as long as the Series 5000.

Save Time on Maintenance
The industry's only pressurized reagent delivery system eliminates the frequent maintenance associated with pumps.

Avoid Downtime
Prognosys, the predictive diagnostic system, allows you to be proactive in your maintenance. Warning LEDs, and high-visibility notification screens let you avoid unplanned downtime.

Clean, Fast and Easy Reagent Change
No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the color-coded cap to the sealed reagent bottle and twist gently.

Verify Easily with Hach Lab Products So You Don't Waste Time Second-guessing
Grab Sample In and Out features allow quick analysis of a grab sample poured into the analyzer, and facilitate taking a sample out of the analyzer to verify in a lab test.

What's included?
Hach 5500sc Analyser, reagents set for up to 90 days of use, installation kit, Hach user manuals.

Accuracy:
0 - 500 µg/L: ±1% or ±1 µg/L of reading, whichever is greater; 500 - 5000 µg/L: ±5%

Alarm:
Four relays output; type: not powered SPDT relays, each rated at
5 A resistive, 240 VAC maximum
Connection: 18 to 14 AWG wire, 18 AWG stranded recommended

Certifications:
CE (EN 61326-1: 2006; EN 61010-1: 2010; EN 60529: 1991, +A1:2000 )
KC (EN 61326-1: 2006)
C-tick (EN 61326-1: 2006)
cETLus (UL 61010-1: 2012; NEMA 250: 2003; CSA C22.2 No 61010-1: 2012)

Fitting type:
Sample line and sample bypass drain: 6 mm (¼-in.)
Air purge inlet: 6 mm (¼-in.)

Manual Languages:
English, French, Spanish, B. Portuguese, Chinese, Japanese, Korean, Thai, German, Italian, C. Portuguese, Czech, Danish, Dutch, Polish, Swedish, Finnish, Bulgarian, Hungarian, Romanian, Lithuanian, Russian, Turkish, Slovak, Slovenian, Croatian, Greek, Estonian

Brand	Hach
Measuring Range	0 - 100 mg/L C
Power supply	TIC/TOC - 230V
Repeatability	3 %
Display Type	High contrast 40 character x 16 line backlit LCD with LED backlight
Weight	46 kg
Power Requirements	50 Hz, 230 V AC
Ambient Temperature	5 - 45 DegreeC
Cycle Time	Typically 5 minutes 30 seconds
Data Storage	Previous 9999 reaction data, Previous 99 fault events
Exceedance Tracking	Full exceedance tracking up to 100 mg/L C
Humidity	5 - 85 % (non-condensing)
Languages	English, Spanish, French, German Others available upon request.
Measurement Method	Infrared Measurement of CO2 after Oxidation (DIN EN 1484:1997-08, ISO 8245:1999-03, EPA 415.1)
Multi-Stream	Up to 2 process streams and grab sample
Number of Channels	1 Channel / Grab sample-Calibration Port (includes two 4-20mA outputs enabled as standard)
Operating Temperature Range	5 - 40 DegreeC
Oxidation Method	Unique Two-Stage Advanced Oxidation Process (TSAO) using Hydroxyl Radicals
Particle Size	Up to 100 micro m
Permissible Chloride Rnge	Up to 30 % w/v
Range Selection	Automatic or Manual Range Selection
Sample Inlet Temperature	0 - 60 DegreeC
Service Interval	6 month service intervals
User Interface	Microcontroller with membrane keyboard

Maximum uptime and reliability for TOC analysis in condensate applications
Through unique technology and semi-annual reagent replacement, the BioTector B3500c delivers 99.86% uptime with the lowest operating cost in condensate applications.Reliable and accurate TOC monitoring allows plants to make confident decisions that protect capital equipment and avoid downtime. The BioTector B3500c, through its innovative oxidation technology, provides maximum reliability and uptime, without sacrificing accuracy. Industry leading reliability combined with low total cost of ownership make the B3500c a natural choice for continuous TOC monitoring in condensate applications.

Many additional versions available on request.

Worry-free TOC
With innovative two stage, advanced oxidation technology, the B3500c provides you with maximum reliability and uptime, without sacrificing accuracy.

Lowest cost of ownership
Requiring you to replace the sample pump tube and calibrate only twice a year, the Hach BioTector B3500c has the lowest operating cost available.

Small footprint = critical wall space savings
With one of the most compact analyser footprints, this analyser frees up wall space for other needed instruments.

Reagent costs that don't kill the bottom line
By only needing to replenish reagents every six months, you will see direct bottom line savings in comparison to other systems requiring bi-weekly or monthly replacements.

One instrument for multiple streams
Providing the ability to monitor two streams at the same time, eliminates the double-cost of needing two separate analysers.

What's included?
Includes: B3500c analyser, Tubing, Fuses, Ferrules, Drain, Acid & Base Dip Tubes, CO??? Filter & B3500c User Manual

Communication:
Modbus RTU, Modbus TCP/IP & Profibus (when the Profibus option is selected, the digital output signals are sent through the Profibus converter with its specific communication protocol)
Except for Zone 1 certification then Modbus RTU, Modbus TCP/IP & Modbus TCP/IP Redundant is available

EExp / Hazardous Location:
Certification options are available to European Standards, (ATEX Zone 1, Zone 2), North American Standards (Class I Division 2) and IECEx Zone 1

Parameter:
Direct measurement of Total Organic Carbon, Total Inorganic Carbon, Total Carbon
Chemical Oxygen Demand, Biological Oxygen Demand via correlation
Volatile Organic Carbon via calculation

Protection Class:
IP44, standard fan cooled, maximum ambient temperature 45 °C
IP54, air cooled, maximum ambient temperature 35 °C
IP54, vortex cooled, maximum ambient temperature 50 °C

Repeatability:
0 - 25 mg/L C: ±3% of reading or ±0.03 mg/L, whichever is greater;
Lower limit of detection LOD = 0.06 mg/L
Exceedance tracking 0 - 100 mg/L C: ±5% of reading or ±0.5 mg/L, whichever is greater

Model Name / Number	BioTector B3500dw
Brand	Hach
Limit of Detection	0.06 mg/L
Measuring Range	0 - 25 mg/L C
Repeatability	+-3% of reading
Display Type	High contrast 40 character x 16 line backlit LCD with LED backlight
Weight	46 kg
Power Requirements	50 Hz, 230 V AC
Ambient Temperature	5 - 45 DegreeC
Channels	1 Channel / Grab sample - Calibration port
Cycle Time	From 5.5 minutes, depending on range and application
Data Storage	Previous 9999 reaction data, Previous 99 fault events
Hazardous	Standard
Humidity	5 - 85 % (non-condensing)
Languages	English, Spanish, French, German Others available upon request.
Measurement Method	Infrared measurement of CO2 after oxidation
Multi-Stream	1 stream
Output	Two 4-20 mA outputs enabled as standard
Parameter	TOC (NPOC), TIC, % TOC removal (with 2 streams) and COD, BOD after correlation
Particle Size	Up to 100 micro m
Range Selection	Automatic or manual range selection
Sample Inlet Temperature	0 - 60 DegreeC
Service Interval	6 months service intervals
User Interface	Microcontroller with membrane keyboard

Maximum uptime and reliability for TOC analysis in drinking water applications
The Hach BioTector B3500dw, with unique, EPA drinking water method approved Two Stage, Advanced Oxidation Technology, provides accurate results you can be confident in, and gives you maximum reliability and uptime for drinking water applications. The analyser typically requires maintenance only twice a year for standard items like reagent replenishment, pump tube replacement and calibration, making it an affordable TOC analyser option.

Because the analyser body has one of the most compact analyser footprints available, plants can free up critical wall space that can be used for other instruments. The B3500dw typically requires reagent replenishment only once every six months instead of bi-weekly or monthly, plus the analyser has the ability to monitor two streams at the same time, and calculate % TOC removal eliminating the need for two separate analysers. The result is accurate, low cost analysis you can rely on.

With maximum reliability and uptime along with low operating costs, the B3500dw provides immediate, direct savings and is the industry’s choice when it comes to TOC analysis for drinking water applications.

Many additional versions available on request.

Rock solid reliability
With unique, EPA method approved Two Stage Advanced Oxidation Technology, the self-cleaning sample reactor of B3500dw delivers maximum reliability.

Lowest cost of ownership
With its 99.86% uptime, semi-annual maintenance and reagent replenishment is all that is needed.

Secure your source water
TSAO technology analyzes organics in your source that are invisible to scanning UV technologies

What's included?
Includes: B3500dw analyser, Tubing, Fuses, Ferrules, Drain, Acid & Base Dip Tubes, C02 Filter & B3500dw User Manual

Communication:
Modbus RTU, Modbus TCP/IP & Profibus (when the Profibus option is selected, the digital output signals are sent through the Profibus converter with its specific communication protocol)

Oxidation Method:
Unique Two-Stage Advanced Oxidation Process (TSAO) using Hydroxyl Radicals, Hach Company method 10261 (EPA approved for drinking water) 

Brand	Hach
Display Type	High contrast 40 character x 16 line backlit LCD with LED backlight
Weight	46 kg
Power Requirements	50 Hz,230 V AC
Ambient Temperature	5 - 45 DegreeC
Automatic Cleaning	Yes
Calibration	Automatic with Self-Cleaning Technology
Cycle Time	Typically 7 minutes,30 seconds
Data Storage	Previous 9,999 reaction data,Previous 99 fault events
Exceedance Tracking	Full exceedance tracking up to 1,000 mg/L C
Humidity	5 - 85 % (non-condensing)
Languages	English
Measurement Method	Infrared measurement of CO2 after oxidation
Number of Channels	1
Number of Sample Streams	Single process stream and manual grab sample
Options	Grab Sample,Cleaning
Oxidation Method	Unique Two-Stage Advanced Oxidation Process (TSAO) using Hydroxyl Radicals
Parameter	Measures TOC,TIC and TC
Particle Size	Up to 100 micro m
Power Supply	230 V AC
Range	250 mg/L C (ppm) with extended range capability 0 - 1000 ppm
Range Selection	Automatic or manual range selection
Sample Inlet Temperature	2 - 60 DegreeC
Service Interval	6 month service intervals
User Interface	Microcontroller with membrane keyboard

Highest reliability in TOC analysis for water control meets low cost of ownership.
The Hach BioTector B3500e, with unique Two Stage, Advanced Oxidation Technology, provides accurate results you can be confident in, and gives you maximum reliability and uptime for effluent waste water applications. The analyser requires maintenance only twice a year for standard items like pump tube replacement and calibration, making it the most affordable TOC analyser option available.Because the analyser body has one of the most compact analyser footprints available, plants can free up critical wall space that can be used for other instruments.With maximum reliability and uptime along with the lowest operating costs, the B3500e provides immediate, direct savings and is the industry’s choice when it comes to TOC analysis for wastwater effluent applications.

Many additional versions available on request.

Esure environmental compliance.
The B3500e is tailor-made for monitoring final wastewater effluent and discharges to meet TOC requirement in water regulations. Being regulatory compliant will save you significant penalty costs while protecting the local environment.

Save with low ownership costs.
Requiring you to replace the pump tube and calibrate only twice a year, the Hach BioTector B3500e provides low operating expenses.

Worry-free TOC with smart design.
The B3500e comes with a built in self-cleaning sample tube and reactor. This enables the B3500e to deliver trustworthy results even if your water contains some level of fat, oil, greases and sludge or has moderate pH swings.

Information you can rely on.
Using BioTector’s internationally proven and unique Two Stage Advanced Oxidation technology, the B3500e delivers maximum uptime, reliability and accuracy.

Access your results from everywhere.
With the B3500e TOC results can be viewed at your desk, your home, or while you are on the move with the BioTector Network Control Unit remote access.

What''s included?
Includes: B3500e analyser, Tubing, Fuses, Ferrules, Drain, Acid & Base Dip Tubes, C02 Filter & B3500e User Manual

Communication:
Modbus RTU, Modbus TCP/IP & Profibus (when the Profibus option is selected, the digital output signals are sent through the Profibus converter with its specific communication protocol)

Repeatability:
Standard range ±3% of reading or ±0.45 mg/L C, whichever is greater; 4% of reading or ±2 mg/L C (whichever is greater) for exceedance range

Brand	Hach
Display	High contrast 40 character x 16 line backlit LCD with CFL backlight
Weight	90 - 120 kg Enclosure weight may change depending on system optional features.
Humidity	5 - 85 % (non-condensing)
Range	0 - 10000 mg/L C
Output	1 programmable 4-20 mA analog output signal channel fitted as standard
Power Requirements	50 Hz, 230 V AC
Repeatability	+-3 % of reading or +-0.3 mg/L C, whichever is greater, with Automatic Range Selection
Ambient Temperature	5 - 40 DegreeC Air conditioning and heating options are available.
Cycle Time	From 6.5 minutes, depending on range and application
Digital Outputs	3 freely programmable system relays
Drain Pressure	Typically ambient (for applications with high drain pressure, optional systems are available)
Enclosure Rating	IP44; optional IP54 with air purge
Expected Measuring Range	Standard range < 5000 mg/L
Languages	English
Lower Limit of Detection (LOD)	0.06 mg/L C
Measurement Method	Infrared measurement of CO2 after oxidation (DIN EN 1484:1997-08, ISO 8245:1999-03, EPA 415.1)
Multi-Stream	1, 2, 4 and 6 streams
Number of Channels	1
Oxidation Method	Innovative Two-Stage Advanced Oxidation Process (TSAO) using Hydroxyl Radicals
Parameter	TOC, TIC, TC, VOC, after correlation COD, BOD, TOG
Particle Size	Up to 2 mm, soft particulates
Permissible Chloride Range	Up to 30 %
Power Supply	TOC/TIC (230VAC)
Range Selection	Automatic or Manual Range Selection
Required Relay Outputs	3 Output Relais (Standard)
Response Time	TOC 6.5 minutes
Sample Inlet Temperature	2 - 60 DegreeC
Sample Volume	Up to 8.0 mL
Service Interval	6 months service intervals
User Interface	Microcontroller with membrane keyboard

The ideal online TOC Analyser to achieve precise results even for your most challenging applications
Hach BioTector TOC analysers provide maximum uptime and reliability due to an innovative self-cleaning oxidation technology that easily handles difficult samples and significantly reduces maintenance. Unlike traditional TOC analysers, the BioTector eliminates build up issues from salts, particulates, fats, oils and greases that lead to drift and high maintenance. With reliable, continuous monitoring and real-time process control, plant operators can optimise their processes to lower overall plant operating costs. The most advanced system in its class, BioTector products achieve precise results from the simplest to the most demanding applications.

With unique two-stage advanced oxidation technology, the BioTector handles even the most challenging applications involving fats, oils, greases, salts, sludge, and particulates. Oversized tubing eliminates filtration and sample contamination. There's minimal maintenance. No calibration or operator intervention required between service intervals. Provides a quick pay back with cost savings in chemical dosing, waste reduction and optimised processes.

Many additional versions available on request.

Worry-free TOC with smart design
The B7000i comes with a built in self-cleaning sample line and reactor. This enables the B7000i to deliver trustworthy results even if your water contains high levels of fats, oils, greases, sludge and particulates or has pH swings.

Easy handling
All B7000i come with unique oversized tubing which eliminated the need for filtration and you can be sure to have a fully representative sample. The special tubing also prevents clogging as well as sample contamination.

Superior reliability
Using BioTector’s internationally proven and innovative Two Stage Advanced Oxidation technology the B7000i delivers maximum reliability, accuracy and availability with a MCert certified uptime of 99.86%. In addition no calibration or maintenance is required between 6-month service intervals.

Flexible field of application
Depending on the type of application, the instrument can operate across a very wide measuring range. The B7000i analyser also has multistreaming capabilities with up to 6 process streams possible. Additionally, it can be adapted for indoor or outdoor use.

Low cost of ownership
Installing a B7000i provides cost savings through optimising processes by decreasing chemical dosing, waste reduction, reducing samples processes and lowering overall plant operation costs.

What's included?
B7000i Analyser, Tubing, Fuses, Ferrules, Drain, Acid & Base Dip Tubes, CO??? Filter & B7000i User Manual.

Communication:
Modbus RTU, Modbus TCP/IP & Profibus (when the Profibus option is selected, the digital output signals are sent through the Profibus converter with its specific communication protocol)
Except for Zone 1 certification then Modbus RTU, Modbus TCP/IP & Modbus TCP/IP Redundant is available

Data Storage:
Previous 9999 analysis data on screen in the microcontroller memory and storage of data archive for the lifetime of the analyser in the SD/MMC card.

Previous 99 fault data on screen in the microcontroller memory and storage of fault data archive for the lifetime of the analyser in the SD/MMC card.

EExp / Hazardous Location:
Certification options are available to European Standards, (ATEX Zone 1, Zone 2), North American Standards (Class I Division 2) and IECEx Zone 1

Brand	Hach
Display Type	High contrast 40 character x 16 line backlit LCD with CFL backlight
Weight	90 - 120 kg Enclosure weight may change depending on system optional features.
Power Requirements	50 Hz, 230 V AC
Ambient Temperature	5 - 40 DegreeC Air conditioning and heating options are available.
Communication	Modbus RTU, Modbus TCP/IP & Profibus
Cycle Time	From 6.5 minutes, depending on application
Drain Pressure	Typically ambient (for applications with high drain pressure, optional systems are available)
Enclosure Rating	IP44; optional IP54 with air purge
Humidity	5 - 85 % (non-condensing)
Languages	English
Lower Limit of Detection (LOD)	0.06 mg/L C
Measurement Method	Infrared measurement of CO2 after oxidation
Multi-Stream	1, 2, 4 and 6 streams
Number of Channels	1 Channel + 1 Flow Input for Product Loss
Output	2 programmable 4 - 20 mA analogue output signal channel fitted as standard
Oxidation Method	Unique Two-Stage Advanced Oxidation Process using Hydroxyl Radicals
Parameter	TOC, TIC, TC, VOC, after correlation COD, BOD
Particle Size	Up to 2 mm, soft particulates
Permissible Chloride Range	Up to 30%
Power Supply	TOC/TIC (230VAC)
Range	0 - 20000 mg/L C
Range Selection	Automatic or Manual Range Selection
Repeatability	+-3 % of reading or +-0.3 mg/L C, whichever is greater, with Automatic Range Selection
Response Time	TOC 6.5 minutes
Sample Inlet Temperature	2 - 60 DegreeC
Sample Volume	Up to 8 mL
Service Interval	6 months service intervals
User Interface	Microcontroller with membrane keyboard

Maximise your profits by minimising your product loss.
The Hach BioTector B7000i Dairy Online TOC Analyser is the most innovative, maintenance-free TOC analyser on the market, designed specifically to detect product loss, decrease and conserve water usage and improve production processes.Industry studies show that lost product can be reduced by over 15% in Dairy Processing Plants by using accurate, reliable and continuous TOC measurement. Further savings of up to 40% can be made in the operating cost of the treatment plant by reducing energy and water consumption.

Many additional versions available on request.

Reliable measurements, every time
With an innovative Two Stage Advanced Oxidation Technology system, a sample injection unit and a self-cleaning sample reactor, as well as tubing designed specifically for dairy applications, the B7000i Dairy analyser provides you with maximum reliability and uptime so you will be certain to get the measurements you need.

Minimum maintenance, even in the harshest conditions
The B7000i Dairy analyser comes with self-cleaning technology which limits necessary maintenance to only twice a year, with no calibration requirements between services. Even in the harsh dairy environment, it will handle samples with soft particles up to 2 mm in diameter, including samples with fat, oil, greases, sludge and salts.

One instrument for multiple streams
A single B7000i Dairy TOC analyser gives you the ability to monitor up to six streams with now added Flow input to enable product management to see actual real time product loss on the BioTector display.

What's included?
Includes: B7000i Dairy analyser, Tubing, Fuses, Ferrules, Drain, Acid & Base Dip Tubes, CO2 Filter & B7000i Dairy User Manual

Data Storage:
Previous 9999 analysis data on screen in the microcontroller memory and storage of data archive for the lifetime of the analyser in the SD/MMC card.

Previous 99 fault data on screen in the microcontroller memory and storage of fault data archive for the lifetime of the analyser in the SD/MMC card.

Model Name/Number	TU5300SC
Material	ASA Luran S 777K / RAL7000, TPE RESIN Elastocon STK40, Thermoplastic Elastomer TPS-SEBS
Brand	Hach
Weight	2.7 kg (5.0 kg with all accessories)
Warranty	1 Year
Compliance	EPA
Controller	Sensor Only
Dimensions	249 mm x 268 mm x 190 mm (H x W x D)
Fitting Type	Sample quick connector: 1/4-in. for 1/4-in. tubing
Instrument	Standard cable and process head
Lower Limit of Detection (LOD)	0.002 NTU
Cable Length	1.6 m (5.25 ft), extendable up to 50 m (164 ft) for instrument without accessories
Mounting Configurations	Wall Mount
Operating Humidity	Relative humidity: 5 - 95% at different temperatures, non-condensing
Operating Temperature Range	0 - 50 DegreeC
Options	Process Head Only
Range	EPA: 0 - 700 NTU / FNU / TE/F / FTU 0 - 175 EBC
Region	Global
Repeatability	Better than 1% of reading or +-0.002 NTU on Formazin at 25 DegreeC (77 DegreeF), whichever is greater
Resolution	0.0001 NTU / FNU / TE/F / FTU / EBC
Response Time	T90 <45 seconds at 100 mL/min
Sample Flow Rate	100 - 1000 mL/min; optimal flow rate: 200 - 500 mL/min
Sample Pressure	6 bar maximum, compared to air at sample temperature range from 2 - 40 DegreeC
Sample Temperature	2 - 60 DegreeC
Signal Average Time	30 - 90 seconds
Storage Conditions	-40 - 60 DegreeC
Stray Light	<10 mNTU
Units	NTU, FNU, TE/F, FTU, EBC
Verification	Liquid: Stablcal, Formazin (0.1 - 40 NTU), Dry: Glass Rod at <0.1 NTU

The EPA approved TU5 Series platform employs a unique optical design that sees more of your sample than any other turbidimeter, delivering the best low level precision and sensitivity while minimising variability between measurements. For the first time you will be able to remove uncertainty of which measurement to trust between your lab and process instruments, thanks to identical 360° x 90° Detection Technology in any TU5 Series turbidimeter.

The TU5300SC Low Range Laser Turbidimeter dramatically reduces the time needed to get a turbidity measurement you can rely on. A stable laser light source eliminates the need for annual lamp replacements. The turbidimeter’s measurement surface area has been reduced by 98%, allowing you to save time cleaning. An automatic cleaning module is available that keeps your instrument clean, reducing the amount of time spent cleaning the instrument ever further. All of this, along with the ability to measure to 2 mNTU, gives you the next standard in the evolution of turbidity.

Only the new TU5 Series Lab & Process Turbidimeters with 360° x 90° Detection deliver unprecedented confidence that a change in your reading is a change in your water.

Groundbreaking 360° x 90° DetectionTM Technology:
The TU5 Series employs a patented optical design that sees more of your sample than any other turbidimeter, delivering the best low level precision and sensitivity while minimizing variability from test to test.

Matching lab and online results:
For the first time you will be able to remove the uncertainty of which measurement to trust, thanks to identical 360° x 90° Detection Technology in both instruments.

Everything about turbidity – faster:
The TU5 Series dramatically reduces the time needed to get a turbidity measurement you can rely on, with 98% less online sample surface area to clean, sealed vials for calibration, and the elimination of the need for indexing and silicone oil in the lab. Not to mention, a smaller online sample volume means you will detect events almost immediately.

No surprises
PROGNOSYS™ monitors your TU5 Series online instrument, proactively alerting you to maintenance needs before your measurement becomes questionable. And a Hach Service Agreement protects your investment and helps ensure that you stay in compliance and on budget.

What's included?
TU5300sc Turbidimeter, User Manual, Wall Mount, Vial Replacement Tool, Screw Set, Drying Cartridge, Flow Regulator, Service Bracket

Accuracy:
±2% or 0.01 NTU from 0 - 40 NTU
±10% of reading from 40 - 1000 NTU based on Formazin primary standard

Calibration Method:
For Formazin and Stablcal:
20 NTU from 0 to 40 NTU; at 20 FNU and 600 NTU for full range

Certifications:
CE compliant
US FDA accession number: 1420493-000 EPA version, 1420492-000 ISO version
Australian ACMA Marking

Enclosure Rating:
Electronic compartment IP55; all other functional units IP65 with process head/ACM attached to the TU5300sc/TU5400sc instrument

Light source:
Class 2 laser product, with embedded 650 nm (EPA 0.43 mW) or Class 1 laser product, with embedded 850 nm (ISO), max. 0.55 mW (complies with IEC/EN 60825-1 and to 21 CFR 1040.10 in accordance with Laser Notice No. 50)

Brand	Hach
Range	200 - 50000 ug/L
Response Time	9.5 minutes
Power Requirements	50/60 Hz, 100 - 240 VAC
Controller Compatibility	sc200, sc1000
Enclosure Rating	IP56 / NEMA 4X
Grab Sample	Grab Sample In and Grab Sample Out capability
Light Source	Class 1M LED (light emitting diode) with a peak wavelength of 810 nm
Measuring Principle	Colorimetric
Mounting	Wall,panel or table
Number of Channels	1
Operating Humidity	5 - 95 % non-condensing (indoor use only)
Operating Temperature Range	5 - 45 DegreeC
Output	4 - 20 mA
Sample Flow Rate:	55 - 300 mL/min

Lower Maintenance, Less Downtime.
The 5500 SC Phosphate Analyser requires only two liters of reagent for the analyser to perform unattended for up to 90 days; twice as long as the Series 5000. The industry's only pressurised reagent delivery system eliminates the frequent maintenance associated with pumps. Predictive diagnostic tools, including Hach's proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime. No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the colour-coded cap to the sealed reagent bottle and twist gently. Grab Sample In and Grab Sample Out features allow quick analysis of a grab sample poured into the analyser, and facilitate taking a sample out of the analyser to verify in a lab test.

90 Days of Continuous Run Time
Only two liters of reagent are required for the analyzer to perform unattended for up to 90 days; twice as long as the Series 5000.

Save Time on Maintenance
The industry's only pressurized reagent delivery system eliminates the frequent maintenance associated with pumps.

Avoid Downtime
Predictive diagnostic tools, including Hach's proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime.

Clean, Fast and Easy Reagent Change
No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the color-coded cap to the sealed reagent bottle and twist gently.

Verify Easily with Hach Lab Products So You Don't Waste Time Second-guessing
Grab Sample In and Grab Sample Out features allow quick analysis of a grab sample poured into the analyzer, and facilitate taking a sample out of the analyzer to verify in a lab test.

What's included?
5500sc analyzer, reagents set for up to 90 days of use, installation kit, Hach user manuals.

Accuracy:
LR model: ±4 µg/L or ±4% of reading, whichever is greater;
HR model: ±500 µg/L or ±5% of reading, whichever is greater

Alarm:
Four relays output; type: not powered SPDT relays, each rated at
5 A resistive, 240 VAC maximum
Connection: 18 to 14 AWG wire, 18 AWG stranded recommended

Certifications:
CE (EN 61326-1: 2006; EN 61010-1: 2010; EN 60529: 1991, +A1:2000 )
KC (EN 61326-1: 2006)
C-tick (EN 61326-1: 2006)
cETLus (UL 61010-1: 2012; NEMA 250: 2003; CSA C22.2 No 61010-1: 2012)

Fitting type:
Sample line and sample bypass drain: 6 mm (¼-in.)

Air purge inlet: 6 mm (¼-in.) Chemical and case drains: 9.5 mm (3/8-in.)

Manual Languages:
English, French, Spanish, B. Portuguese, Chinese, Japanese, Korean, Thai, German, Italian, C. Portuguese, Czech, Danish, Dutch, Polish, Swedish, Finnish, Bulgarian, Hungarian, Romanian, Lithuanian, Russian, Turkish, Slovak, Slovenian, Croatian, Greek, Estonian

Repeatability:
LR model: ±1%
HR model: ±500 µg/L or ±5% of reading, whichever is greater

Lower Limit of Detection (LOD):LR model: 4 µg/LHR model: 200 µg/L

Model Name / Number	Polymetron 9611 sc
Range	200-50,000 ug/L
Brand	Hach
Repeatability	LR model: +-1%, HR model: +-500 micro g/L or +-5% of reading, whichever is greater
Response Time	9.5 minutes
Dimension	804 mm x 452 mm x 360 mm
Weight	20 kg (45 lb) without reagents and standards,36.3 kg (80 lb) with reagents
Power Requirements	100 - 240 VAC
Controller Compatibility	sc200, sc1000
Enclosure Rating	IP66 / NEMA 4X
Fitting Type	Sample line and sample bypass drain: 6 mm (1/4-in.)
Grab Sample	Grab Sample In and Grab Sample Out capability
Light Source	Class 1M LED (light emitting diode) with a peak wavelength of 810 nm
Measuring Principle	Colorimetric
Mounting	Wall, panel or table
Number of Channels	1, 2, 4; 1
Operating Humidity	5 - 95 % non-condensing (indoor use only)
Operating temperature range	5 - 45 degree C
Sample Flow Rate	55 - 300 mL/min

Only two liters of reagent are required for the analyser to perform unattended for up to 90 days. The industry''s only pressurized reagent delivery system eliminates the frequent maintenance associated with pumps. Predictive diagnostic tools, including Hach''s proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime. No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the colour-coded cap to the sealed reagent bottle and twist gently. Grab Sample In and Grab Sample Out features allow quick analysis of a grab sample poured into the analyser, and facilitate taking a sample out of the analyzer to verify in a lab test.

Lower maintenance, less downtime
Reliable online low range phosphate analyzer that saves critical time and effort. Available with 1/2/4 channels and including reagents set for start up and up to 90 days of use. Open chemistry.

90 days of continuous runtime
Only two liters of reagent are required for the analyzer to perform unattended for up to 90 days; twice as long as the Series 5000.

Save time on maintenance
The industry''s only pressurized reagent delivery system eliminates the frequent maintenance associated with pumps.

Avoid downtime
Predictive diagnostic tools, including Hach’s proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime.

Verify easily with Hach Lab products so you don''t waste time second-guessing
Grab Sample In and Out features allow quick analysis of a grab sample poured into the analyzer, and facilitate taking a sample out of the analyzer to verify in a lab test.

Accuracy:
LR model: ±4 µg/L or ±4% of reading, whichever is greater;
HR model: ±500 µg/L or ±5% of reading, whichever is greater
(Tested with Hach reagents)

Alarm:
Four relays output; type: not powered SPDT relays, each rated at
5 A resistive, 240 VAC maximum
Connection: 18 to 14 AWG wire, 18 AWG stranded recommended

Certifications:
CE (EN 61326-1: 2006; EN 61010-1: 2010; EN 60529: 1991, +A1:2000 )
KC (EN 61326-1: 2006)
C-tick (EN 61326-1: 2006)
cETLus (UL 61010-1: 2012; NEMA 250: 2003; CSA C22.2 No 61010-1: 2012)

Manual Languages:
English, French, Spanish, B. Portuguese, Chinese, Japanese, Korean, Thai, German, Italian, C. Portuguese, Czech, Danish, Dutch, Polish, Swedish, Finnish, Bulgarian, Hungarian, Romanian, Lithuanian, Russian, Turkish, Slovak, Slovenian, Croatian, Greek, Estonian

Brand	Hach
Parameters	Ammonium
Weight	Without sample preparation system and without chemicals: 31 kg
Power Requirements	50 Hz, 115 - 230 V AC, powered by Power Box or SC Controller
Accuracy	Using standard solutions: 3% + 0.05 mg/L
Cable Length	2 m fixed data cable at analyzer
Data Transfer	Current output, relays and bus communication via SC controller
Dimensions	720 mm x 540 mm x 390 mm (H x W x D)
Enclosure Rating	IP55
Filtersystem Included	No, use e.g. Filtrax
Flow	1 - 20 L/h Sample (free of suspended solids)
Fuse Protection	Via SC1000 controller or power box. Maximum of 2 analysers per SC1000 or power box
Indoor/Outdoor	Outdoor
Lower Limit of Detection (LOD)	0.05 mg/L NH4-N
Material	ASA/PC UV-resistant
Measurement Method	GSE (Gas Sensitive Electrode) with screw-on membrane cap
Measuring Interval	5 - 120 min, adjustable per 5 min.
Measuring Principle	NH4 is being converted to NH3 gas, wich is being measured at the GSE.
Number of Channels	1
Operating Humidity	95% relative humidity, non-condensing.
Operating Temperature Range	-20 - 45 DegreeC
Output	Relay, current outputs, and bus interface via sc1000 Multi-parameter Universal Controller or sc200 w
Permissible Chloride Range	Max. Cl- concentration: 1000 mg/L
pH Range	5 - 9 pH
Pressure Range	-30 - 50 mbar With continuous sample preparation; at overflow vessel
Range	0.05 - 20.0 mg/L NH4-N
Region	US
Reproducibility	2% + 0.05 mg/L
Response Time	< 5 minutes
Sample Level	Sample level in basin and filtration system must be below analyzer.
Sample Quality	Ultra filtrated or comparable.
Sample Temperature	4 - 40 DegreeC (39 - 104 DegreeF)
Sampling Option	one channel continuous sample from filtration unit, e.g. FILTRAX
Storage Conditions	4 to 55 DegreeC less than 95% Relative Humidity
What's Included	0.05 - 20 mg/L NH4-N, 115 VAC Amtax sc Ammonium Analyzer, 3 month supply of all necessary consumable

Hach's Amtax SC digital on-site analyser with gas selective electrode is designed for the high precision determination of ammonium concentration directly at the tank. The analyser offers a high degree of accuracy due to selective GSE instrumentation and needs only minimal supervision thanks to automatic cleaning and calibration & self diagnosis. Amtax SC instruments are ideal for installation directly on the tank edge, for fast reaction times in the closed loop control. The ammonium analyser is available with a weather proof housing for outdoor setup or optional with a transparent door for indoor setup. Easy access to reagents and wear parts.

The Amtax SC can be connected to a SC200 (power box required) or a SC1000 controller to provide versatile output options including 4-20 mA Output, Modbus RS485, Profibus, or Hart.

Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.

This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.

Transparent, high quality measurement technology for reliable values with short response time
Hach's Amtax Ammonium Analyzer provides a wide measurement range for a variety of wastewater applications. Low detection limit of 0.05 mg/L. Environmentally controlled for rugged, outdoor installations. Designed specifically for easy installation at the measurement point. Automatic cleaning and calibration every day. Easy access to reagents and wear parts.

Wide Measurement Range
Amtax sc Ammonium Analyzers are available in four measuring ranges. With detection limits as low as 0.02 mg/L and ranges up to 1000 mg/L, the Amtax sc can be used anywhere in the wastewater treatment process, from the influent or start of the nitrification process with high NH4-N levels to the effluent with only low ammonium levels. In the lowest range it can also be used for drinking water applications.

Fast Response Time for Control of Nutrient Removal Process
Nutrient removal is a critical and sensitive process in wastewater treatment. Quick response is vital for optimal operation. The fast response time of only 5 minutesand selection of the measurement interval, make the Amtax sc Ammonium Analyzer the fastest responding ammonia analyzer on the market.

Easy Installation
The Amtax sc Analyzer is designed to be installed at the measuring location, including outdoor locations. The housing is weatherproof and lockable so that the analyzer can be installed right at the basin, even in the toughest climates.The Amtax sc easily mounts to a wall, rail- and stand-mounting options are available. Due to its SC technology the analyzer is ready for use in the network of the SC controller ("plug-and-play").

Low Maintenance and Simple Operation
The analyzer calibrates and cleans itself automatically and is equipped with comprehensive self-diagnostic routines. With at least a 3-month supply of reagents (for 5 min interval), the Amtax sc analyzer offers the most economical reagent consumption. Reagents and wear parts are easily accessible.

Optional with Sample Preparation or Second Channel
The Amtax sc analyzer works with a low-maintenance filtration system (e.g. Filtrax) that removes particles larger than 0.15 µm. The filtrate is sent to the analyzer while air bubbles constantly clean the filtration membrane.

Model Name / Number	Phosphax sc
Range	1.0 - 50 mg/L
Brand	Hach
Accuracy	2 % of reading
Limit of detection	1.0 mg/L
Response Time	< 5 mins
Dimension	720 mm x 540 mm x 390 mm
Power Requirements	50 Hz, 115 - 230 V AC
Channels	1
Enclosure Rating	IP55
Flow	1 - 20 L/h Sample
Fuse Protection	Via SC1000 controller or power box. Maximum of 2 analysers per SC1000 or power box
Material	ASA/PC UV-resistant
Measurement Method	Photometric method using vanadate-molybdate.
Operating Temperature Range	-20 - 45 DegreeC
pH Range	5 - 9 pH

The Phosphate Analyzer has low detection limit of 0.05 mg/L, is environmentally controlled for rugged, outdoor installations, and designed specifically for easy installation at the measurement point. It provides a wide measurement range for a variety of wastewater applications. Automatic cleaning and calibration every day. Easy access to reagents and wear parts.

Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.

Phosphax SC must be connected to an SC1000 to form a complete loop.

This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.

Multiple measurement ranges for a variety of wastewater applications
With detection limits as low as 0.05 mg/L and as high as 50 mg/L, the Phosphax sc phosphate analyzer can be used anywhere in the wastewater treatment process, from the influent or start of the phosphorous removal process where phosphate levels may be high to the effluent where phosphate levels are at their lowest.

Low cost of operation with proven yellow method
The Phosphax sc analyzer determines ortho-phosphate concentration using the molybdovanadate yellow colorimetric method which optimizes reagent consumption and helps save on operating costs.

Generate actionable insights from measurement data
The Phosphax sc is Claros enabled so you can leverage the Hach Water Intelligence System to collect, manage and analyse data from your instrument.

Easy installation at the measurement point
Hach''s Phosphax sc phosphate analyzer is designed to be installed at the measurement point (indoor and outdoor options). The housing is weatherproof and lockable for installation at the basin, even in the toughest climates. Mounting options include: wall, rail, or standing. The unit comes complete and assembled; no separate housing is required.

Low maintenance
Several features make the Phosphax sc phosphate analyzer easy to use and maintain:

• Automatic cleaning at customized intervals.
• Automatic zero-calibration at each measuring cycle.
• Prognosys Predictive Diagnostics alerts you to upcoming instrument issues and guides you on whether the changes in your measurements are due to your instrument or your water.
• Easy access to reagents and wear parts.

What''s included?
0.05 - 15 mg/L PO4-P, 115-230 VAC PHOSPHAX sc Ortho-Phosphate Analyzer, for one channel continuous sample, 3 month supply of all necessary consumables at 5 minute cycle time, user manuals

Brand	Hach
Display Type	High contrast 40 character x 16 line backlit LCD with LED backlight
Weight	50 Kg
Power Requirements	50 Hz, 230 V AC
Ambient Temperature	5 - 45 DegreeC Cooling and heating options are available.
Cycle Time	TOC from 5 minutes, depending on application
Humidity	5 - 85 % (non-condensing)
Languages	English
Measurement Method	Infrared measurement of CO2 after oxidation
Multi-Stream	1 stream
Number of Channels	1
Output	Includes two 4-20mA outputs enabled as standard
Oxidation Method	Unique Two-Stage Advanced Oxidation Process (TSAO) using Hydroxyl Radicals
Parameter	TOC, TIC, TC, VOC, after correlation COD, BOD
Particle Size	Up to 100 micro m
Power Supply	TOC/TIC ul - 230V, 50/60Hz
Range	0 - 5000 micro g/L C
Repeatability	+- 2 % of reading or +- 10 micro g/L C, whichever is greater
Sample Inlet Temperature	2 - 60 DegreeC
Service Interval	6 months service intervals
User Interface	Microcontroller with membrane keyboard

High accuracy and dependability for detecting low levels of TOC
Changes in water quality for ultra pure applications are disruptive to plant operations. Accurate, on-line analysis is important to protect critical equipment that depends on ultra pure water resources. Leading manufacturers know that it is critical to analyse for contaminates precisely at ppb levels to maintain water quality. Reliability and effective oxidation of large samples ensures that manufacturers can trust the results reported by the BioTector B3500ul analyser. With a full picture of organic contaminants in critical water applications manufacturers make water treatment decisions more efficiently.

The Hach BioTector B3500ul provides reliable and accurate TOC analysis at ppb levels for ultrapure water applications. The unique two stage advanced oxidation technology behind the BioTector thoroughly, and reliably oxidises samples for valuable real-time water analysis.

Maximum uptime for your process
With uptime certified at 99.86% and two short, scheduled maintenance events per year, you will not be missing critical process information when you need it the most.

Instant and long term savings
Reduce the costs related to water re-treatment, and save on operational expenses. On-line TOC analysis enables maximum water reuse and keeps critical water resources at their best to maximise the lifetime of high-value capital equipment.

Communication:
Modbus RTU, Modbus TCP/IP & Profibus (when the Profibus option is selected, the digital output signals are sent through the Profibus converter with its specific communication protocol)

Except for Zone 1 certification then Modbus RTU, Modbus TCP/IP & Modbus TCP/IP Redundant is available

Data Storage:
Previous 9999 analysis data on screen in the microcontroller memory and storage of data archive for the lifetime of the analyser in the SD/MMC card.

Previous 99 fault data on screen in the microcontroller memory and storage of fault data archive for the lifetime of the analyser in the SD/MMC card.

EExp / Hazardous Location:
Certification options are available to European Standards, (ATEX Zone 1, Zone 2), North American Standards (Class I Division 2) and IECEx Zone 1

Protection Class:
IP44, standard fan cooled, maximum ambient temperature 45 °C
IP54, air cooled, maximum ambient temperature 35 °C
IP54, vortex cooled, maximum ambient temperature 50 °C