Hach DHR India Private Limited

Brand	KIPP & ZONEN
Spectral range (50% points)	285 to 2800 nm
Response time (63%)	< 0.7 s
Response time (95%)	< 2 s
Analogue output (-V version)	0 to 1 V
Analogue output (-A version)	4 to 20 mA
Digital output	2-wire RS-485

The SMP10 has an internal drying cartridge that will last for at least 10 years if the housing is not opened. This minimizes maintenance significantly.

The interval for dome cleaning can be extended, and the quality of measurements maximized, by fitting SMP10 with the CVF4 ventilation unit.

The SMP10 has Modbus® interface, amplified analogue output, improved response time and temperature corrected measurement data. The wide and low power supply range from 5 to 30 VDC makes integration in meteorological and solar energy stations easy. The SMP10 is protected against over voltage, reversed polarity and short circuiting.

Model Name/Number	CMP10
Response Time	< 5 s
Brand	KIPP & ZONEN
Spectral range (50% points)	285 to 2800 nm
Operational temperature range	-40 DegreeC to +80 DegreeC
Field of view	180 Degree

The CMP10 has an internal drying cartridge that will last for at least 10 years if the housing is not opened. This minimizes maintenance significantly.

The interval for dome cleaning can be extended, and the quality of measurements maximized, by fitting CMP10 with the recently launched CVF4 ventilation unit.

The Pyranometer does not require any power, it supplies a low voltage of 0 to 20mV in relation to the amount of incoming radiation. 

Brand	KIPP & ZONEN
Response time (63%)	< 1.5 s
Response time (95%)	< 12 s
Spectral range (50% points)	300 to 2800 nm
Analogue output (-V version)	0 to 1 V
Analogue output (-A version)	4 to 20 mA
Digital output	2-wire RS-485

The SMP3 is a smart pyranometer with low maintenance and industry standard digital and analogue amplified outputs. Based on the proven CMP 3 technology the SMP3 adds Modbus® interface, improved response time and temperature corrected measurement data. The wide and low power supply range from 5 to 30 VDC makes integration in meteorological stations easy. The SMP is protected against over voltage, reversed polarity and short circuiting. Because all SMP’s have identical sensitivity and connections exchanging instruments during recalibration is easy.

SmartExplorer Windows™ for data logging, display of data and Modbus® address setting is provided as standard.

SMP3 measures global solar radiation on a horizontal plane. When tilted with the same angle as a PV panel it measures the tilted global radiation, for PV module efficiency calculations.

Model Name/Number	CMP3
Response Time	20 s
Brand	KIPP & ZONEN
Spectral range	300 to 2800 nm
Operational temperature range	-40 DegreeC to +80 DegreeC
Field of view	180 Degree

The CMP3 pyranometer is an instrument for measuring the solar irradiance. The thermopile sensor construction measures the solar energy that is received from the total solar spectrum and the whole hemisphere (180 degrees field of view). The output is expressed in Watts per meter square. The CMP3 pyranometer is designed for continuous indoor and outdoor use.

The CMP3 pyranometer (ISO 9060 spectrally flat Class C) is intended for shortwave global solar radiation measurements in the spectral range from 300 to 2800 nm. The thermopile detector measures irradiance up to 2000 W/m² with response time <20 seconds and  sensitivity that varies less than 4 % from -10 ºC to +40 ºC.

Operating temperature range is -40 ºC to +80 ºC and the stability is better than 1 % per year.

The CMP3 pyranometer features a snap-on white sun shield, integrated leveling and a weatherproof connector which is supplied pre-wired with 10 m of signal cable for simple installation. An optional mounting rod and longer cable lengths are available. Two CMP 3s can easily be mounted back-to-back to make a low-cost albedometer.