Compact hydraulic power packs are a type of hydraulic power pack. They are characterised by a highly compact design, since the motor shaft of the electric motor also acts as the pump shaft.
Directional seated valves have zero leakage. Depending on the valve type, operation is electromagnetic, pressure-actuated, mechanical or manual.
The range includes seated valves and valve combinations.
Check valves block volumetric flow in one direction while enabling it in the other direction.
The range includes check valves, releasable check valves, pre-fill valves and line rupture protection valves.
Pressure control valves influence the system pressure in a specific, pre-determined manner. This is achieved by altering the throttling cross-sections with the aid of mechanical, electrical or hydraulic movements.
The range includes pressure-limiting valves, pressure-reducing valves, switching valves and load-holding valves.
Directional spool valves are a type of directional valve. They control the direction of movement and the velocity of single and double-acting hydraulic consumers.
The range includes on/off directional spool valves, proportional directional spool valves and valve combinations.
Flow control valves are a type of flow valve. They generate a set constant volumetric flow, largely independently of the load.
Proportional flow control valves are a type of flow valve. They generate a constant volumetric flow independent of the load which can be controlled in an electro-proportional and remote way.
A connection block represents the connecting link between the hydraulic power pack and the hydraulic control. The connection blocks described here are suitable for combining with compact hydraulic power packs.
Axial piston pumps have several pistons that are arranged parallel to the drive shaft. They are available as either variable pumps or constant pumps.
Variable displacement axial piston pumps operate according to the bent axis principle. They adjust the geometric output volume from maximum to zero. As a result they vary the flow rate that is provided to the loads.
Fixed displacement axial piston pumps operate according to the bent axis principle. They have a constant output volume and therefore deliver a constant flow rate at a specific rotation speed.
Hydraulic clamping cylinders generate a pressure-controlled clamping force at the piston. Without pressure the clamping pistons return to their initial position.
Axial piston motors are constant motors. They have a constant displacement and therefore generate a fixed speed dependent on the volumetric flow.
Piston type accumulators are a type of hydraulic accumulator. A freely moving piston separates the compressible gas cushion from the hydraulic fluid.
Diaphragm accumulators are a type of hydraulic accumulator. A diaphragm separates the compressible gas cushion from the hydraulic fluid.
On/off directional spool valves are used to control the direction of movement of consumers such as hydraulic motors and hydraulic cylinders.
Hawe Hydraulics Private Limited
No. 68, Industrial Suburb, 2nd Stage, PF Office, Yeshwanthpur,
Bengaluru-560022, Karnataka, India