HB Polytech Industries

• Grouting height from 20 - 120 mm
• High flowability, even after 60 minutes
• Cement-based and chloride-free
• Controlled and even expansion with a rigid bond between concrete foundation and machine base plate
• High early and final strength
• Low modulus of elasticity with high  bending strength
• Resistant to cracks even when having a low w/c-value (0.35)
• Resistant to freeze/thaw cycles, waterproof, resistant to oil and petrol
• Pumpable and easy to pour
• even during low temperatures
• Compatible for use in drinking water areas
• Meets requirements of CRD-C-621-83, 
• ASTM-C-1107-Grade C, ASTM-C-827 & 
• ASTM-C-1090, IS-4031-1988, 

Additional Information:

• Production Capacity: 100000
• Delivery Time: 10
• Packaging Details: 30 Kg Bag

Dr. Fixit Samshield PS is a SBS modified bituminous, self adhesive sheet membrane laminated onto a tough polyester fleece to provide a highly superior waterproofing and protection membrane for underground concrete structures. The self adhesive side protected with a silicone release film. A selvedge is provided on one side of the membrane to give a bitumen to bitumen contact on the overlaps, thus restricting any water penetration through the laps.

Additional Information:

• Item Code: FCC813390400000
• Delivery Time: 2 days

Dr. Fixit Pidiseal PS 41G is a two part elastomeric sealant which when mixed and applied cures by chemical reaction to form a tough, flexible rubber seal. It is recommended for sealing construction and expansion joints

Additional Information:

• Item Code: FCC882920600000
• Delivery Time: 2 days
• Packaging Details: 2.5 litre

Dr. Fixit Roofseal is a single component cold applied elastomeric waterproofing coating based on synthetic resin emulsion. It is a tough yet extremely flexible coating that can be efficiently applied to any thickness by roller or squeegee creating a fully adhered waterproofing coating with no wastage. It is water based with low VOC’s that is sustainable for years as a waterproofing coating.

Additional Information:

• Item Code: FCC815302000000
• Delivery Time: 2 Days
• Packaging Details: 5 & 20 Ltrs

Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.

Additional Information:

• Item Code: FCC857722500000
• Delivery Time: 2 days
• Packaging Details: 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg & 50 kg

Dr. Fixit Dampguard is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, additives in water as a medium. It has an advantage of dilution with water for application over cementitious surfaces. It is used as an internal coating for the waterproofing treatments of water tanks and building walls because it can be applied over damp surfaces, has excellent water resistance, adhesion, hardness, toughness and sets faster similar to solvent based epoxy formulations.

Additional Information:

• Item Code: FCC852300100000
• Delivery Time: 2 days
• Packaging Details: 500 gm & 1 kg

Dr. Fixit Fastflex is a two component cementitious coating, composed of high quality cement, properly selected & graded fillers, additives and liquid polymer. It is suitable for achieving waterproofing for the water retaining structures such as swimming pools, water tanks, reservoirs, other wet areas, etc, because it provides strong bonding, good waterproofing and provides excellent resistant to hydrostatic water pressure by forming highly elastic seamless coating over the applied concrete or masonry surfaces.

Additional Information:

• Item Code: FCC870401200000
• Delivery Time: 2 days
• Packaging Details: 12 kg ( 7 kg powder + 5 kg polymer) 48 kg (28 kg powder + 20 kg polymer)

Dr. Fixit Samshield XL is a self adhesive waterproofing membrane based on a tropical grade of polymer modified bitumen. The bitumen compound is laminated onto an impervious, non-perforated, cross laminated HDPE film. The membrane is protected on the self adhesive side with a silicone coated release film. Dr. Fixit Samshield XL conforms to the requirement of BS 8102.

Additional Information:

• Item Code: FCC813390600000
• Production Capacity: 10000
• Delivery Time: 2 days
• Packaging Details: 1 X 10 Mtr

Dr. Fixit Crack-X Paste is composed of high quality weather durable acrylic emulsion polymer, properly selected graded fillers, light fast pigment& additives. It is a single pack, ready to use flexible putty for filling the cracks in plastered surfaces because it has excellent bonding, ease of application, water resistance, aesthetic appearance & durability.

Additional Information:

• Item Code: FCC842200500000
• Delivery Time: 2 Days
• Packaging Details: 200, 500 gms, 1 kg & 5 kg.

• Heavy industry
• Power stations
• Agricultural buildings & yards
• Desalination plants
• Distillation plants
• Laboratories
• Abattoirs
• Warehouse floors, loading bays and workshops
• Steel industries
• Railway platforms

Additional Information:

• Item Code: FCC857602000000
• Delivery Time: 2 days
• Packaging Details: 200 & 500 g, 1, 5 & 20 Kg

• Excellent all round water and chemical resistance.
• Suitable for most substrates and application techniques.
• Excellent in all waterproofing applications.
• Excellent adhesion and flexibility.
• Complies with ASTM C188 Type III bonding of skid-resistant surfacing.

Dr. Fixit Pidiseal PS 42P is a two component, self smoothing, elastomeric sealant which when mixed and applied cures by chemical reaction to form a tough, flexible rubber seal.

Additional Information:

• Item Code: FCC848320600001
• Delivery Time: 2 Days
• Packaging Details: 4 Litres

Dr. Fixit Epoxy Bonding Agent is a two part solvent free bonding agent composed of liquid epoxy resin andhardener. It is used for bonding of structural concrete new to old concrete and bonding agent for bricks and steelcomponents because it gives excellent bonding properties to freshly mixed concrete/mortars, glazed bricks,tiles, etc.

Dr. Fixit Epoxy Zinc Primer is a two-component system based on metallic Zinc and epoxy resin, hardener &additives which on mixing gives a grey coloured liquid. Dr. Fixit Epoxy Zinc Primer is recommended for coatingon steel reinforcement or steel surfaces as an anti corrosion primer. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations.

Dr. Fixit Pidifin 2K is a two component cementitious & acrylic flexible waterproofing & protective coatingcomposed of best quality portaland cement, properly selected & graded aggregates, additives & acrylicemulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures. speciallyformulated for swimming pools, retaining walls, pile Heads, water tanks, submerged tunnels, sumps, bridgedecks, marbles, granites and a wide variety of extreme service class structures because on curing it forms anexcellent elastomeric, waterproof & protective layer over the substrate.

Additional Information:

• Item Code: FCC845501400000
• Delivery Time: 2 Days
• Packaging Details: 3, 15 Kg

Dr. Fixit Pidiprime A is a one pack ready to use solvent containing solution of polymer. It enhances the bonding/ adhesion of Polysulphide Sealants with metal, glass, wood and cementitious surfaces. It is not recommended for application of sealants in areas where sealant remains in completely immersed in water

Additional Information:

• Item Code: FPM82415000000
• Delivery Time: 2 days
• Packaging Details: Dr. Fixit Pidiprime A is a one pack ready to use solvent containing solution of polymer. It enhances the bonding/ adhesion of Polysulphide Sealants with metal, glass, wood and cementitious surfaces. It is not recommended for application of sealants in areas where sealant remains in completely immersed in water.

Dr. Fixit Primeseal is water-based primer composed of acrylic emulsion polymer, properly selected fine fillers, white pigments & additives in water as a medium. It is used as primer over exterior & interior building walls before application of water based paints.

Additional Information:

• Item Code: FCC858702000000
• Delivery Time: 2 days
• Packaging Details: 1, 4, 10 & 20 ltrs

Dr. Fixit Concrete Guard is a solvent based composition of acrylic solution polymer, properly selected & graded inert fillers, light fast pigments & additives. It is specially formulated to protect reinforced concrete and other masonry cementitious substrate that is directly exposed to atmospheric conditions like UV radiation, high humidity, heavy rain, industrial pollution, & carbonation. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating

Additional Information:

• Item Code: FCC878202000000
• Delivery Time: 2 days
• Packaging Details: 20 litres

Dr. Fixit Heatshield is a white,UV-stable and weatherproof, elastomeric acrylic coating. It is used as a waterproofing and heat reflective coating on roofs and exterior walls resulting in substantial reductions in power consumption, due to its good SRI value. Dr. Fixit Heatshield contains hollow glass micro-spheres. Within the dry film these form a closely packed airspace with low thermal conductivity leading to reduced heat transfer. This keeps buildings cooler by reducing the conduction of heat from exterior to interior spaces. Dr. Fixit Heatshield has been tested to ASTM E-903; Standard Test Method for Solar Absorbance, Reflectance, and Transmittance of Materials Using Integrating Spheres.

Additional Information:

• Delivery Time: 2 days
• Packaging Details: 1, 4 and 20 litre

Additional Information:

• Delivery Time: 2 days
• Packaging Details: 4 & 20 litre

Dr. Fixit Torchshield Primer is a solvent based bitumen modified primer conforming to ASTM D/41, to beused to seal and prepare the substrate prior to the installation of the Dr. Fixit Torchshield torch-on and Dr. FixitSamshield, self adhesive membranes. In addition to that, it also acts as a binder for the dust particles which getsaccumulated on the concrete surface even after cleaning.

Features & Benefits:

Uniformity – Torchshield is self-finished membrane provides jointless monolithic surface & provides excellent watertight solution.

Strength – High tensile strength, tear & puncture resistance properties makes it highly durable.

Vapour barrier – It is an impermeable membrane with less water absorption properties protects, the structure from weathering.

Performance stability – Withstands thermal & structural stresses effectively without any fatigue, improves performance.

Ease of application - Easy melting & fixing thus saving on usage of expensive gases. Can be laid quickly & easily.

Eco-friendly - Safe & environment friendly.

Durability - Does not undergo early ageing thus provides long life durable membrane.

Dr. Fixit Pidiproof LW+ is a Tonic for Cement that enhances and modifies the properties of cement while constructing new building. It is a specially formulated additive composed of cement compatible surface active agent, polymers & additives. It is used as an additive for cement concrete, mortar & plasters while constructing the building, because plasticizing properties makes concrete cohesive and prevents segregation. It improves the integral waterproofing properties of cement concrete & plasters after curing.

Additional Information:

• Item Code: FCC821702000000
• Delivery Time: 2 days
• Packaging Details: 200 ml, 1, 5, 10, 20 & 100 litre

• Forms a permanent, tough, elastic rubber seal.
• Excellent adhesion to concrete, brickwork, painted wood, glass, glazed surfaces, aluminum, stainless steel, steel and plastics.
• Non-sag.
• No staining of cementitious substrates.
• Accommodates continuous and pronounced cyclic movement

Additional Information:

• Item Code: FCC859860010100
• Delivery Time: 2 Days
• Packaging Details: 600Ml Sausage

Dr. Fixit Raincoat is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, many additives & water as a medium. It is used as a waterproofing & protective coating for exterior walls of the buildings because it forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging ability, weathering durability and an excellent resistance to the growth of microorganisms.

• As anticarbonation, protective & decorative coating for
• Bridges, flyovers, subways, underpass, stadiums
• RCC water tanks
• Concrete structures that are exposed to atmospheric conditions
• All types of cementitious exterior masonry and plastered surfaces
• Can also be applied on shot blasted & primed steel

Dr. Fixit Pidiseal PS 43 is a two component, pouring grade, elastomeric sealant which when mixed and applied cures by chemical reaction to form a tough and flexible rubber seal.

Additional Information:

• Item Code: FCC882820600000
• Delivery Time: 2 days
• Packaging Details: 4 Litre pack

Dr. Fixit Polyplus CP is composed of cement, graded aggregates and proprietary reactive agents and additives. It is used as a surface applied, permanently active waterproofing treatment for concrete. The active ingredients when activated by contact with penetrating water, form crystals which penetrate deep within the concrete matrix blocking pores, voids and cracks, effectively sealing against water ingress.

Additional Information:

• Item Code: FCC876502500000
• Delivery Time: 2 days
• Packaging Details: 20 kg bags

An acrylic polymer based economical elastomeric waterproofing system for protecting concrete & masonry surfaces

Additional Information:

• Item Code: FCC827605000000
• Delivery Time: 2 days
• Packaging Details: 1, 5, 20 & 50 kg container

Dr. Fixit Krystalline is composed of high quality cement, properly selected & graded inert aggregates, proprietary waterproofing active chemicals & additives. It is used as a chemically active waterproofing treatment for concrete. Dr. Fixit Krystalline when mixed with water and applied as a brush coat to concrete, it penetrates deeply into the capillaries of the concrete & protects it against the permeability of water.

Additional Information:

• Item Code: FCC857202500000
• Delivery Time: 2 Days
• Packaging Details: 1, 5 & 25 kg