Hi Q Test Equipment Private Limited

Display Type	Analog
Brand	HiQ
Usage/Application	Laboratory
Model Name/Number	BTS 303C
Country of Origin	Made in India
Fixed Power Supply	+/-5V @ 500mA ; +- 12V@500mA ;
Variable Power Supply	0-15V & 0-(-) 15V @ 500mA

BREAD BOARD TRAINER SYSTEM ; Model No: BTS 303C Specifications: (1) TTL High/Low Input switch selectors with LED indication –16Nos. (2) TTL High/Low Output status LED indication – 16Nos. (3) 7 Segment Display with built-in Decoder/Driver - 2Nos. (4) TTL Compatible bounce less single shot trigger Pulse +Ve -1 & -Ve Pule -1 (5) TTL/CMOS Clock selection from 1Hz to 1MHz (6) DC Power Supply: Fixed Power Supply : +/-5V @ 500mA ; ± 12V@500mA ; Variable : 0-15V & 0-(-) 15V @ 500mA (7) Solder less Bread Board – 2Nos. (8)Speaker -1 Accessories Supplied: Patch cords – 1 set. ; 3Pin Power cord -1 ; User Manual – 1.

Brand	HiQ
Country of Origin	Made in India
Model No	HIQ BTS 301

EDC LAB TRAINER KIT- Model: BTS 301

BTS-301 made breadboard Trainer is an effective and extremely powerful Lab teaching aid for constructing any desired circuit with different components. In-built fixed and variable Power supplies of required values with overload and short circuit protection system is an added feature of this Board. Different fixed frequency Clocks have been provided to feed as inputs to the circuits built on the breadboards.

Specifications:

Power Supply DC: 0 to 30v @500mA -2

Fixed DC: 12v-0v-(-)12V@500mA

AC Source: 12v-0v-12v@ 250mA @ 50Hz

Universal Solder less Bread Board -1

DC Ammeter: 3 1⁄2 Digit ; 0-200uA/200mA

 

DC Volt meter : 3 1⁄2 Digit ; 0-20V/200V

Model Name/Number	UDT-604A
Country of Origin	Made in India

UNIVERSAL DIGITAL IC TRAINERFULL SYSTEM ; Model: HiQ-UDT 604A(Suitable for Digital ICs Lab)

Specifications:

All Basic Logic Gates includingAND/OR/NAND/NOR/EX-OR/NAND/NOR/4 Bit Binary Adder/Inverter - 6Nos./4-Bit-Synchronous Counter/4Bit,MagnitudeComparator/4-Bit R/L Shift Register/4-BitUP/DOWN Counter/Decade Counter/Multiplexer & De- Multiplexer/Half Adder and Full Adder/MS JK Flip Flops –4Nos. /20pin ZIF sockets -2/BCD to 7Segment Decoder /TTL Compatible De bounce lessHigh/Low Input Switch selection with LED indicator - 12Nos./TTL Compatible High/Low Output status LEDIndicator-12Nos./TTL Compatible bounce less singleshot trigger pulse +ve and –ve - lno. Each/TTL Compatible High and Low going Squarepulse 1Hz and 10Hz - lno. Each/ 7-SegmetDisplay-1No./DC Power Supply Fixed: 5V/2A-1No.
 

• Logic Gates:  2 Input AND gate
• 2 Input OR gate 
• 2 Input NAND gate
• 2 Input NOR gate
• 2 Input EX-OR Gate
• 4 Input NAND gate
• 4 Input NOR gate
• 4 Bit Binary Adder 
• Inverter
• 4 Bit Synchronous Counter, 4 Bit Magnitude Comparator, 4 Bit-R/L Shift Register.
• 4 Bit UP/DOWN Counter
• MS JK FLIP FLOPS
• TTL Compatable Debounces High/Low Switch selection with LED status indicator .
• 1 Bread Board 

Accessories Supplied:Patch cords – 1 set ; User Manual - 1

Model Name/Number

HiQ BTS 303E

BREAD BOARD TRAINERSYSTEM ; Model: BTS 303E

Specifications:

(1) TTL High/Low Input switch selectors withLED indication –12Nos. (2) TTL High/Low Output status LED indication– 12Nos. (3) 7 Segment Display with built-in Decoder/Driver- 2Nos. (4)TTL Compatible bounce less single shot triggerPulse +Ve -1 ; & -Ve Pulse -1(5) TTL Clock selection from 1Hz to 2MHz(6) DC Power Supply:DC Variable Power Supply 0 to 15V/500 mA0 to 0 (-) 15V/500mAFixed Power Supply :5V @ 1A ;± 12V@500mAAC Source: 12V-0V-@50Hz(7) Solder less Bread Board – 2Nos.

Accessories Supplied:Patch cords – 1 set. ; 3Pin Power cord -1 ;User Manual CD-1

Model Name/Number

HiQ-DIT001

Features:
Frequency Clocks: 

• TTL compatible continuous fast and Slow going square wave flock selection provided for fixed frequencies of 10 Hz & 1Hz. It is useful in most of the digital circuits like counters, Flip-flops, Shift Registers and etc.

Pulser:
Single shot pulsers-manually push to ON state with debounce circuit to provide the following pulses:

• Positive Square Pulse.
• Negative Square Pulse

This is useful in most of the digital circuits like counters, Flip-Flops, Shift Registers and ect.

7-Segment Display:

• 7-Segment Display is provided on Front panel with built in Decoder/Driver circuit for direct use in applications. The name indicates seven-segment display make use of seven segments and each segment contains an LED. The seven LED’s are labeled as a to g. It is a 10 pin device.
• Apply the BCD inputs directly from logic-input indicators or from any counter circuit, the equivalent decimal value will be displayed on 7-segment.

Power supplies:

• DC regulated Fixed Power Supply provided on the Front Panel for external connections:

 

Fixed Power Supplies:

• +5V/1.25A all the digital IC’s are internally connected.

Logic Input Switches:

• De-bounced input Toggle switches with LED indicators to force to HIGH or LOW voltages for level setting. It is useful in Digital Circuits.

 

Model Name/Number

BCDK

To verify & test the value of basic electronic components Resistor, Capacitor, Diode, Ic,Transistor Etc.,

Brand	HiQ
Model Name/Number	HiQ BTS 303Z
Country of Origin	Made in India

BBREAD BOARD TRAINERSYSTEM ; Model: BTS 303Z

Specifications:

(8) TTL High/Low Input switch selectors withLED indication –16Nos. (9) TTL High/Low Output status LED indication– 16Nos. (10) 7 Segment Display with built-in Decoder/Driver- 2Nos. (11) TTL Compatible bounce less single shottriggerPulse +Ve -1 ; & -Ve Pulse -1(12) TTL Clock selection from 1Hz, 10Hz, 100Hz(13) DC Power Supply:Fixed Power Supply : +/-5V @ 1A ;± 12V@500mASolder less Bread Board – 2Nos. (14) Speaker -1

Accessories Supplied:Patch cords – 1 set. ; 3Pin Power cord -1 ;User Manual – 1

Model Name/Number

HiQ 301

Features:

• Ideal for electronics analog and digital circuit experimentation and design.

• Built-in 1MHz Sine, Square, Triangle and +ve & -v Pulse Generator.
• 5-Digit Frequency Counter
• 3-Digit-Digital CD voltmeter & ammeter
• Built-in fixed and variable power supplies
• High Quality Universal solder less Bread-board
• Bounceless TTL Switches &  LED Indicators
• TTL compatable Single shot and Continuous variable clock (1MHz)
• Variable potentiometers

• 7-Segmemt Display with decoder/driver

Model No

BTS-303E

Other Details:

• 7 Segment Display with built in Decoder/Driver
• +Ve & -Ve,Trigger pulse with debounce circuit 
• DC Power Supply: Variable power supply 0 to +15V;& 0 to -15V@ 500mA
• Fixed power supply +5V@mA;+or -12V@500mA
• AC Source 12V-0v-12V;250mA@ 50Hz.

Brand

HiQ 303AD

ANALOG & DIGITAL TRAINER SYSTEM(Suitable for EDC/DIGITAL/PDC/LINEAR IC ApplicationsLab)
Model: HiQ BTS-303AD ; Make: HiQ

Specifications:

TTL High/Low Input switch selectors withLED indication –16Nos.TTL High/Low Output status LED indication – 16Nos. 7 Segment Display with built-in Decoder/Driver- 2Nos. + ve and – ve trigger pulses - 1 each. Function generator : SINE/SQUAURE/TRIANGLEFREQ: 1hz to 1MHzTTL Square clock: 1Hz to 1MHz>DC Power Supply:Variable Power Supply: 0 to 30v @500mA -2Fixed Power Supply : +/- 5V @ 1A ; +/- 12V @500mA>AC Source: 12v-0v-12v ; 250mA @ 50Hz > Speaker -1 Solderless Bread Board – 2Digital Meters DC Ammeter: 3 1⁄2 Digit ; 0-200uA/200mADC Volt meter : 3 1⁄2 Digit ; 0-20V/200V

Accessories Supplied:Patch cords – 1 set ; User Manual - 1

Model Name/Number

BTS-303AD

Specification

• Logic Gates:  2 Input AND gate
• 2 Input OR gate 
• 2 Input NAND gate
• 2 Input NOR gate
• 2 Input EX-OR Gate
• 4 Input NAND gate
• 4 Input NOR gate
• 4 Bit Binary Adder 
• Inverter
• 4 Bit Synchronous Counter, 4 Bit Magnitude Comparator, 4 Bit-R/L Shift Register.
• 4 Bit UP/DOWN Counter
• MS JK FLIP FLOPS
• TTL Compatable Debounces High/Low Switch selection with LED status indicator .

Model Name/Number

HiQ-LIC-02

GENERIC I.C. TRAINER HIQ-LIC-02