Have a requirement?
Chat with us
Have a requirement?
Chat with us
- DIFFERENTIAL PROBE 100 MHZ PT-8110
- High Voltage Differential Probe HVP-40DM
- High Current Probe 300khz,2a-500a Pt-2740
- HIGH VOLTAGE PROBE WITH DIGITAL METER HVP-40DM
- HIGH FREQUENCY HIGH VOLTAGE DIFFERENTIAL PROBE 150MHZ PT-5116
- HIGH VOLTAGE DIFFERENTIAL PROBE 100MHZ N1140A
- High Voltage Probe 40KV,60HZ HVP-40
- HIGH VOLTAGE DIFFERNTIAL PROBE 60MHZPT-5250
- HIGH VOLTAGE DIFFERENTIAL PROBE 50MHZ N1008A
- DIFFERENTIAL PROBE 100MHZ N1015A
- HIGH VOLTAGE PROBE 35MHZ CP-230
- HIGH VOLTAGE PROBE 250MHZ CP-2250
- HIGH FREQUENCY DIFFERENTIAL PROBE 150MHZ PT-5108
- HIGH VOLTAGE PROBE 150 MHZ P6018A
- HIGH VOLTAGE DIFFERENTIAL PROBE 100MHZ DP750-100
- HIGH VOLTAGE DIFFERENTIAL PROBE 75MHZ PT-5240
- DIFFERENTIAL PROBE 70MHZ PT-8020
- DIFFERENTIAL PROBE 100MHZ DP-210
- HIGH VOLTAGE PROBE 220MHZ P6039A
- HIGH ACCURACY DIFFERENTIAL PROBE 50MHZ N1070A
- DIFFERENTIAL PROBE 50MHZ N1030A
- AGILENT DIFFERENTIAL PROBE 75MHZ PT-5230
- DIFFERENTIAL PROBE 30MHZ DP-30HS
- DIFFERENTIAL PROBE 20MHZ PT-5120
- DIFFERENTIAL PROBE 100MHZ DP-100
- HIGH SENSITIVITY DIFFERENTIAL PROBE 150MHZ PT-5102
- DIFFERENTIAL PROBE 40MHZ DP-40LV
- DIFFERENTIAL PROBE 50MHZ DP-50
- DIFFERENTIAL PROBE 200MHZ DIY PT-5200
- LOW VOLTAGE DIFFERENTIAL PROBE 60MHZ DP-60HS
- Torque Meter
- Light Dependant Resistor
- Measurement Of Power & Parameters Of Choke Coil Using 3 Ammeter & 3Volt Meter HiQ 5107
- LVDT Trainer HIQ-5109
- Resistance Strain Gauge Bridge Trainer HiQ 5110
- Calibration And Testing Of Single Phase Energy Meter Hiq-5100
- Kelvin Double Bridge for Measurement of Low Standard Resistance Hi Q-5103
- +16 more products
DIFFERENTIAL HIGH VOLTAGE &CURRENT MEASURING PROB
| Model Name/Number | PT-8110 |
|
Specification PT-8110 |
|
|
Bandwidth |
DC-100MHz |
|
Accuracy |
±2% |
|
Input Impedance |
48MΩ//1.3PF each side ground |
|
Output Voltage |
|
|
-Swing(into 50 KΩ load) |
7V |
|
-Offset(typical) |
±5Mv |
|
-Source Impedancetypical |
50Ω |
|
Power Requirements |
|
|
-Standard |
4×AA cells or 6V DC adaptor |
|
-Options |
power leads |
|
Length of BNC Lead |
90cm |
|
Length of Input Leads |
60cm |
|
Weigh |
500g |
|
Dimension(L×W×H) |
186mm×83mm×38mm |
|
Model |
PT-8110 |
|
Attenuation Ratio |
1:100/1000 |
|
CMRR(typical) |
-80dB@60Hz,-50d B@100KHz |
|
Differential Input VoltageVp-p |
140@1/100 1400@1/1000 |
|
Common Mode VoltageVp-p |
1400V@1/100 1/1000 |
|
Absolute Max .Input (Each side to ground) |
CATII 1000V,CAT 600V |
|
Features |
·Bandwidth up to 100MHz ·Up to 1400Vp-p Differential and Common Mode ·Safety Certified |
|
Applications |
·Switching Power Supply Design ·Motor Drive Design ·Electronic Ballast Design ·CRT Display Design |
View Complete Details
High Voltage Differential Probe HVP-40DM
₹ 4,000/PieceGet Latest Price
| Model Name/Number | HVP-40DM |
Our company holds vast experience in this domain and is involved in offering High Voltage Differential Probe.
Features:
- Easy usage
- Reliable
- Precisely manufactured
Specification:
Product Name | High Voltage Probe HVP-40DM |
Short Description | DC 40KV CAT II Pollution 2 |
Input Resistance | 2000M??? |
Maximum operation voltage | 40KV DC , CAT II , Pollution 2 |
LCD | 3999 digital display LCD |
Accuracy | ??? 1.0% ± 2 (All Range) |
Temperature Coefficient | ??? 100ppm / ??? |
Maximum loading Current | ??? 20μA |
Maximum loading power | ??? 0.8 watt |
Range | 40KV / 4KV / 400V / Have 3 Range |
Resolution | 10V / 1V / 0.1V / Have 3 Range |
Power | 9V battery; 9V / 006P, IEC6L R1, NEDA 1604A |
Battery life | About 200hours (when use alkaline battery ) |
Automatic close-down function | About 30minutes |
Peak value locking time | ??? 400 ms |
Ambient operating Humidity | 0??? ~ + 50??? |
Ambient strobe Humidity | - 20??? ~ + 70??? |
Cable length | 90 centimetre ( 35 " ) |
Size | 420 (L) x 80Φ mm |
Weight | 360g |
View Complete Details
High Current Probe 300khz,2a-500a Pt-2740
₹ 5,000/PieceGet Latest Price
Minimum Order Quantity: 1 Piece
| Model Name/Number | PT-2740 |
Features:
Model Number | PT-2740 | |
Range | 20mV/A | 2mV/A |
Current range | DC: 2A~30A AC:2A~60Ap-p | DC:30A~250A AC:60A~500Ap-p |
Output signal error | 2% | 2% |
Bandwidth-3dB | DC-300kHz | |
Load impedance | ≥1MΩ and ≤100pF | |
Impedance | 001Ω | |
Noise | 2mV | |
Rise time | 1.2μs | |
Operating voltage | Max.600Vrms | |
CMRR | Max.600Vrms | |
Battery | 9V | |
Low battery indicator | with green LED light when >6.5V | |
Overload indicator | Red LED light indicates the over measuring current, change the range | |
Mechanical Specifications | ||
Operating temperature | 0~+50 | |
Storage temperature | -3~+80 | |
Temperature influence | Every 10<0.2% | |
Operating relative humidity | +10~+3085±5% relative humidity(non-condensing ) +40~+5045±5%relative humidity(non-condensing ) | |
Operating height | 0~2000m | |
View Complete Details
HIGH VOLTAGE PROBE WITH DIGITAL METER HVP-40DM
₹ 5,000/PieceGet Latest Price
Minimum Order Quantity: 5 Piece
| Model Name/Number | HVP-40DM |
Specifications:
|
Input Resistance |
2000MΩ |
|
Maximum operation voltage |
40KV DC , CAT II , Pollution 2 |
|
LCD |
3999 digital display LCD |
|
Accuracy |
≦ 1.0% ± 2 (All Range) |
|
Temperature Coefficient |
≦ 100ppm / ℃ |
|
Maximum loading Current |
≦ 20μA |
|
Maximum loading power |
≦ 0.8 watt |
|
Range |
40KV / 4KV / 400V / Have 3 Range |
|
Resolution |
10V / 1V / 0.1V / Have 3 Range |
|
Power |
9V battery; 9V / 006P, IEC6L R1, NEDA 1604A |
|
Battery life |
About 200hours (when use alkaline battery ) |
|
Automatic close-down function |
About 30minutes |
|
Peak value locking time |
≧ 400 ms |
|
Ambient operating Temperature |
0℃ ~ + 50℃ |
|
Ambient Storage Temperature |
- 20℃ ~ + 70℃ |
|
Cable length |
90 centimetre ( 35 " ) |
|
Size |
420 (L) x 80Φ mm |
|
Weight |
360g |
View Complete Details
HIGH FREQUENCY HIGH VOLTAGE DIFFERENTIAL PROBE 150MHZ PT-5116
₹ 4,500/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model Name/Number | PT-5116 |
Specifications:
|
Model |
PT-5116 |
|
Bandwidth（-3dB） |
DC-150MHz |
|
Attenuation Ratio |
x400，x4000 |
|
Rise time |
2.3ns |
|
Accuracy |
±2% |
|
Input AC Voltage（Vp-p） |
16KV |
|
Input DC Voltage |
8KV |
|
Input AC Voltage（AC rms） |
5.6KV |
|
Between Impedance |
20MΩ//5PF |
|
Oscilloscope input impedance |
50Ω |
|
Noise（In 50Ω load） |
≤1mV rms |
|
Size |
220*85*30 mm |
View Complete Details
HIGH VOLTAGE DIFFERENTIAL PROBE 100MHZ N1140A
₹ 4,500/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model | N1140A |
Specifications:
|
Model |
N1140A |
|
Bandwidth（-3dB） |
DC-100MHz |
|
Attenuation Ratio |
1:1000/100 |
|
Accuracy |
±1% |
|
Impedance |
20MΩ//1pF |
|
Rise time |
3.5ns |
|
-Output（into 50KΩ load） |
7V |
|
-Offset（typical） |
＜±5mV |
|
Oscilloscope input impedance |
1MΩ |
|
CMRR |
-80dB@60Hz，-50dB@100KHz |
|
Input AC Vp-p |
14KV@1/1000 1.4KV@1/100 |
|
Input DC Voltage |
7000V@1/1000 700V@1/100 |
|
Size |
186*84*38 mm |
View Complete Details
| Model Name/Number | HVP-40 |
The Pintek HVP-40 is a high voltage probe
- suitable for measuring voltages up to 40kV DC or 28kV AC at 50/60Hz. With an input impedance of 1000 MΩ,
- the current flowing through the probe is only 40µA.
- The probe is designed to allow the user to measure high voltages as safely as possible.
- The probe is tested for CE, TUV GS, UL, CUL and IEC1010 and is approved. With the connectors that the HPV-40 has, it can be connected to almost all multimeters.
- The HPV-40 can be used for a wide range of applications.
Input Resistance
1000MΩ;
Attenuation Ratio
1000：1
Max. Operation Voltage
DC 0~ ± 40kV
AC 1~ 28kV(50/60Hz)
Polarity
Positive/negative are measurable
Accuracy
DC：± 1% to 20 kV , ± 2% to 40 kV
AC：- 5% to - 10% at 50 ~ 60Hz
Temperature Coefficient
≦ 200ppm /℃
Maximum Loading Current
≦ 40μA ( at 40kV DC )
Maximum Loading Power
≦ 1.6 watt
Operating Temperature
0℃ ~ + 50℃
Designated link
10MΩ input impedance DMM
Meter output instructions
X 1000， 1V→1000V 10V→10kV
Remark
The meter which is selected to use should has 10Mohm input impedance besides the accuracy should between ±0.5%, otherwise it will seriously affect attenuation ratio.
View Complete Details
HIGH VOLTAGE DIFFERNTIAL PROBE 60MHZPT-5250
₹ 5,000/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model No | PT-5250 |
Specifications:
|
Model |
PT-5250 |
|
Bandwidth（-3dB） |
DC-60MHz |
|
Attenuation Ratio |
x500，x5000 |
|
Rise time |
5.8ns |
|
Accuracy |
±2% |
|
Input AC Voltage（Vp-p） |
50KV |
|
Input DC Voltage |
25KV |
|
Input AC Voltage（AC rms） |
17KV |
|
Between Impedance |
140MΩ//3PF |
|
Oscilloscope input impedance |
1MΩ |
|
Noise（In 50Ω load） |
≤1mV rms |
|
Size |
275*147*34 mm |
View Complete Details
HIGH VOLTAGE DIFFERENTIAL PROBE 50MHZ N1008A
₹ 5,000/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model Name/Number | N1008A |
Specifications:
|
Model |
N1008A |
|
Bandwidth（-3dB） |
DC-50MHz |
|
Attenuation Ratio |
1:100/10 |
|
Accuracy |
±1% |
|
Impedance |
4MΩ//1.3pF |
|
Rise time |
7ns |
|
-Output（into 50KΩ load） |
7V |
|
-Offset（typical） |
＜±5mV |
|
Oscilloscope input impedance |
1MΩ |
|
CMRR |
-80dB@60Hz，-50dB@100KHz |
|
Input AC Vp-p |
800V@1/100 80V@1/10 |
|
Input DC Voltage |
400V@1/100 40V@1/10 |
|
Size |
165*69*26 mm |
View Complete Details
| Model Name/Number | N1015A |
Specifications:
|
Model |
N1015A |
|
Bandwidth（-3dB） |
DC-100MHz |
|
Attenuation Ratio |
1:1000/100 |
|
Accuracy |
±1% |
|
Impedance |
8MΩ//1pF |
|
Rise time |
3.5ns |
|
-Output（into 50KΩ load） |
7V |
|
-Offset（typical） |
＜±5mV |
|
Oscilloscope input impedance |
1MΩ |
|
CMRR |
-80dB@60Hz，-50dB@100KHz |
|
Input AC Vp-p |
1500V@1/1000 150V@1/100 |
|
Input DC Voltage |
750V@1/1000 75V@1/100 |
|
Size |
165*69*26 mm |
View Complete Details
| Model Name/Number | CP-230 |
Specifications:
|
Division Ratio |
1:1 |
|
Bandwidth |
DC-35MHz |
|
Rise time |
10nS |
|
Output impedance |
1MΩ |
|
Input capacitance |
Approx.83pF |
|
Working voltage |
300V CAT I ,150V CAT II(DC+peak AC) derating with frequency |
|
Working temperature |
0℃ to 50℃ |
|
storage temperature |
85% RH or less (at 35℃) |
|
Safety equipment |
Meets EN61010-031 CAT II |
|
Line length |
1.2m |
View Complete Details
| Model Name/Number | CP-2250 |
Specifications:
|
х10 Range |
|
|
Division Ratio |
10:1 |
|
Bandwidth |
DC-250MHz |
|
Rise Time |
1.4nS |
|
Input Resistance |
10MΩ |
|
Input Capacitor |
About 17PF |
|
Compensation Range |
10~35PF |
|
Operating Voltage |
600V DC+AC peak |
|
х1 Range |
|
|
Division Rtio |
1:1 |
|
Band Width |
DC~6MHz |
|
Rise Time |
58nS |
|
Input Resistance |
1MΩ |
|
Input Capacitor |
About 47PF |
|
Operating Voltage |
300V DC+AC peak |
|
General |
|
|
DC Accuracy |
≦1% |
|
Temp.Coefficient |
≦200ppm/℃ |
|
Cable Length |
1.2M |
|
Operating Temp. |
0℃~+50℃ or less 85%RH（35℃） |
|
Storage Temp. |
-20℃~+70℃ or less 90%RH |
|
Weight |
90g |
View Complete Details
HIGH FREQUENCY DIFFERENTIAL PROBE 150MHZ PT-5108
₹ 5,000/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model Name/Number | PT-5108 |
Specifications:
|
Model |
PT-5108 |
|
Bandwidth（-3dB） |
DC-150MHz |
|
Attenuation Ratio |
x20，x200 |
|
Rise time |
2.3ns |
|
Accuracy |
±2% |
|
Input AC Voltage（Vp-p） |
800V |
|
Input DC Voltage |
400V |
|
Input AC Voltage（AC rms） |
280V |
|
Between Impedance |
20MΩ//5PF |
|
Oscilloscope input impedance |
50Ω |
|
Noise（In 50Ω load） |
≤1mV rms |
|
Size |
220*85*30 mm |
View Complete Details
| Model Name/Number | P6018A |
Specifications:
|
Model |
P6018A |
|
Division Ratio |
1000：1 |
|
Pluse voltage |
12KVp-p |
|
Input Resistance |
200MΩ |
|
Input Capacitor |
1.5 PF |
|
Max. DC |
18KV CAT ‖ |
|
Max. AC RMS. |
12KV CAT ‖ |
|
Max. Loading Current |
90uA |
|
Band Width |
DC-150MHz(-3dB) |
|
Rise Time |
3.5 ns |
|
Signal /Noise |
>60dB at 1KHz; >50dB at 1MHz |
|
DCV Accuracy |
≦3% Full Range |
|
ACV Accuracy |
≦3% at 1KHz |
|
Temp. Coefficient |
≦200 PPM/℃ |
|
Compensation Range |
10PF~35PF |
|
Safety |
Meets EN61010-031CAT‖ |
|
Cable Length |
2M±0.2M |
|
Operation Temp. |
-10~55℃ |
|
Humidity |
85%RH or less(at 35℃) |
|
Storage Temp. |
-20~70℃ |
|
Color: Handel/Body |
Black/ Yallow |
|
Weight /Volume |
460g/80(W)×80(H) ×320(L)mm |
View Complete Details
HIGH VOLTAGE DIFFERENTIAL PROBE 100MHZ DP750-100
₹ 6,500/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model Name/Number | DP750-100 |
Micsig's DP750 is a high accuracy,
Features:
- The leads and probe are with shielded design, interface ends are integrated in a compact box;
- No need to twist the cables, leads to a lower noise floor and has less interference.
- Support one-press Zero calibration and automatic overrange alarm;
- Directly powered by Micsig UPI interface, auto match scaling setup with oscilloscope;
- Can be powered by oscilloscope via USB cable.
- low noise,
- high voltage oscilloscope probe, suitable for any brand of oscilloscope.
- The Micsig DP750-100 is a high voltage differential probe,
- capable of measuring at 100MHz bandwidth and up to 750V peak.
- It allows convenient measurements of large differential voltages without damaging your oscilloscope.
- This probe is compatible with most brands of oscilloscopes as it draws its power from USB.
- On Micsig branded tablets the USB cable is even eliminated as it draws power directly from its UPI interface.
- It also features an instant-zero calibration button on its body.
-
The DP750 can be widely used in the research and development,
-
commissioning or maintenance of switching power supplies,
-
frequency converters,
-
electronic ballasts,
-
frequency conversion home appliances and other electrical power devices.
View Complete Details
HIGH VOLTAGE DIFFERENTIAL PROBE 75MHZ PT-5240
₹ 5,500/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model Name/Number | PT-5240 |
Specifications:
|
Model number |
PT-5240 |
|
Differential Voltage DC+AC peak to peak |
40KV |
|
Bandwidth (50Ω load -3dB) |
DC-75MHz |
|
Common Mode Voltage DC+AC peak to peak |
40KV |
|
Common Mode Voltage AC/RMS |
14KVrms |
|
Range(Switchable) |
2% |
|
Input Impedance (Between Input) |
100MΩ//1PF |
|
Input voltage range |
≤4KV at X500 ≤40KV at X5000 |
|
Common Mode Rejection Ratio(CMRR) |
60Hz:>10000:1 100hz:>1000:1 1Mz:>300:1 |
|
Noise(Into 50Ω Load) |
≤1.0V rms |
|
Accuracy |
2% |
|
Power Source |
External DC 9V/200mA |
|
Dimension(LXWXH) |
218x83x30mm |
|
Weight |
350g |
View Complete Details
| Model Name/Number | PT-8020 |
Specifications:
|
Model |
PT-8020 |
|
Bandwidth（-3dB） |
DC-70MHz |
|
Attenuation Ratio |
1:100/1000 |
|
Accuracy |
±2% |
|
Impedance |
20MΩ//1pF |
|
Rise time |
5ns |
|
-Output（into 50KΩ load） |
7V |
|
-Offset（typical） |
＜±5mV |
|
Oscilloscope input impedance |
1MΩ |
|
CMRR |
-80dB@50Hz，-60dB@20KHz |
|
Input AC Vp-p |
1400V@1/100 14KV@1/1000 |
|
Input DC Voltage |
700V@1/100 7000V@1/1000 |
|
Size |
186*84*38 mm |
View Complete Details
DIFFERENTIAL PROBE 100MHZ DP-210
₹ 5,000/PieceGet Latest Price
| Model Name/Number | DP-210 |
Specifications:
|
Model |
DP-210 |
|
Bandwidth(-3dB) |
DC-100MHz |
|
Accuracy |
±2% |
|
Attenuation ratio |
X50/X500 |
|
Rise time |
3.5ns |
|
Voltage Input Ranges(DC+ Peak AC) |
±1300V@500(1838Vrms) ±130V@50(183Vrms) |
|
Permitted Max. Input voltage |
Max differential voltage:±1300V(DC+ACpeak) |
|
Max voltage between each input terminal and ground |
919Vrms |
|
Input Impedance |
5MΩ//2pF each side to ground |
|
Output voltage |
≤±2.6V |
|
Output impedance |
50Ω(for 1 MΩ input oscilloscope) |
|
Rejection Rate on common mode |
60Hz:>80dB/100Hz:>60dB/1MHz:>50dB |
|
5 MHZ Limit Bandwidth |
Switchable: Full / 5MHz |
|
Power supply |
External 5 V DC (USB Input) |
|
consumption |
300mA |
|
Weight |
285g |
|
Dimension (L×W×H) |
175x68x28mm |
View Complete Details
| Model Name/Number | P6039A |
Specifications:
|
Model |
P6039A |
|
Division Ratio |
10001 |
|
Max. pulse voltage |
27KVp-p |
|
Input Resistance |
900MΩ |
|
Input Capacitor |
2.0PF |
|
Max. DC |
39KV CAT |
|
Max. AC RMS. |
27KV CAT |
|
Max. Loading Current |
43uA |
|
Bandwidth |
DC-220MHz-3dB |
|
Rise Time |
1.6 ns |
|
Signal /Noise |
>60dB at 1KHz; >50dB at 1MHz |
|
DCV Accuracy |
3% Full Range |
|
ACV Accuracy |
3% at 1KHz |
|
Temp. Coefficient |
200 PPM/ |
|
Compensation Range |
10PF~35PF |
|
Safety |
Meets EN61010-031CAT |
|
Cable Length |
2M±0.2M |
|
Operation Temp. |
-10~55 |
|
Humidity |
85%RH or less(at 35) |
|
Storage Temp. |
-20~70 |
|
Color: Handel/Body |
Black/ Red |
|
Weight /Volume |
460g/80(W)×80(H) ×320(L)mm |
View Complete Details
HIGH ACCURACY DIFFERENTIAL PROBE 50MHZ N1070A
₹ 5,000/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model Name/Number | N1070A |
Specifications:
|
Model |
N1070A |
|
Bandwidth（-3dB） |
DC-50MHz |
|
Attenuation Ratio |
1:1000/100 |
|
Accuracy |
±1% |
|
Impedance |
20MΩ//1pF |
|
Rise time |
7ns |
|
-Output（into 50KΩ load） |
7V |
|
-Offset（typical） |
＜±5mV |
|
Oscilloscope input impedance |
1MΩ |
|
CMRR |
-80dB@60Hz，-50dB@100KHz |
|
Input AC Vp-p |
7000V@1/1000 700V@1/100 |
|
Input DC Voltage |
3500V@1/1000 350V@1/100 |
|
Size |
186*84*38 mm |
View Complete Details
| Model Name/Number | N1030A |
Specifications:
|
Model |
N1030A |
|
Bandwidth（-3dB） |
DC-50MHz |
|
Attenuation Ratio |
1:1000/100 |
|
Accuracy |
±1% |
|
Impedance |
8MΩ//1pF |
|
Rise time |
7ns |
|
-Output（into 50KΩ load） |
7V |
|
-Offset（typical） |
＜±5mV |
|
Oscilloscope input impedance |
1MΩ |
|
CMRR |
-80dB@60Hz，-50dB@100KHz |
|
Input AC Vp-p |
3000V@1/1000 300V@1/100 |
|
Input DC Voltage |
1500V@1/1000 150V@1/100 |
|
Size |
165*69*26 mm |
View Complete Details
AGILENT DIFFERENTIAL PROBE 75MHZ PT-5230
₹ 3,000/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model Name/Number | PT-5230 |
Specifications:
|
Model |
PT-5230 |
|
Bandwidth（-3dB） |
DC-75MHz |
|
Attenuation Ratio |
x200，x2000 |
|
Rise time |
4.7ns |
|
Accuracy |
±2% |
|
Input AC Voltage（Vp-p） |
30KV |
|
Input DC Voltage |
15KV |
|
Input AC Voltage（AC rms） |
11KV |
|
Between Impedance |
81.6MΩ//1PF |
|
Oscilloscope input impedance |
1MΩ |
|
Noise（In 50Ω load） |
≤1mV rms |
|
Size |
218*83*30 mm |
View Complete Details
| Model Name/Number | DP-30HS |
Specification:
|
Model |
DP-30HS |
|
Bandwidth(-3dB) |
DC-30MHz |
|
Attenuation Ratio |
x1,x2,x10 |
| Accuracy |
±2% (After 20 minutes of heat up) |
|
Input voltage range |
x1≤6.5V，x2≤13V，x10≤65V |
|
Input voltage range |
65V |
|
Noise |
≤1.0mV rms |
|
Impedance |
2MΩ//1.7PF |
|
Size |
195*55*30 mm |
View Complete Details
| Model Name/Number | PT-5120 |
Specifications:
|
Model |
PT-5120 |
|
Bandwidth（-3dB） |
DC-20MHz |
|
Attenuation Ratio |
x300，x600，x1500，x3000 |
|
Rise time |
17.5ns |
|
Accuracy |
±2% |
|
Input AC Voltage（Vp-p） |
20KV |
|
Input DC Voltage |
10KV |
|
Input AC Voltage（AC rms） |
17KV |
|
Between Impedance |
118MΩ//1.2PF |
|
Oscilloscope input impedance |
1MΩ |
|
Noise（In 50Ω load） |
≤2mV rms |
|
Size |
240*80*30 mm |
View Complete Details
| Model Name/Number | DP-100 |
Specifications
|
Model |
DP-100 |
|
Bandwidth(-3dB) |
DC-100MHz |
|
Attenuation Ratio |
x100,x200,x500,x1000 |
|
Rise time |
3.5ns |
|
Accuracy |
±2% (After 20 minutes of heat up) |
|
Input voltage range |
x100≤700V，x200≤1400V，x500≤3400V，x1000≤7000V |
|
Input voltage range |
3500V |
|
Noise |
≤2.0mV rms |
|
Impedance |
16MΩ//1.2PF |
|
Size |
240*80*30 mm |
View Complete Details
HIGH SENSITIVITY DIFFERENTIAL PROBE 150MHZ PT-5102
₹ 5,000/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model Name/Number | PT-5102 |
Specifications:
|
Model |
PT-5102 |
|
Bandwidth（-3dB） |
DC-150MHz |
|
Attenuation Ratio |
x2，x20 |
|
Rise time |
2.3ns |
|
Accuracy |
±2% |
|
Input AC Voltage（Vp-p） |
80V |
|
Input DC Voltage |
40V |
|
Input AC Voltage（AC rms） |
28V |
|
Between Impedance |
1MΩ//7.5PF |
|
Oscilloscope input impedance |
50Ω |
|
Noise（In 50Ω load） |
≤1mV rms |
|
Size |
220*85*30 mm |
View Complete Details
| Model Name/Number | DP-40LV |
Specification:
|
Model |
DP-40LV |
|
Bandwidth(-3dB) |
DC-40MHz |
|
Attenuation Ratio |
x10,x20,x100 |
|
Rise time |
9ns |
|
Accuracy |
±2% (After 20 minutes of heat up) |
|
Input voltage range |
x10≤65V，x20≤130V，x100≤650V |
|
Input voltage range |
325V |
|
Noise |
≤0.7mV rms |
|
Impedance |
2MΩ//1.7PF |
|
Size |
195*55*30 mm |
View Complete Details
| Model Name/Number | DP-50 |
Specification:
|
Model |
DP-50 |
|
Bandwidth(-3dB) |
DC-50MHz |
|
Attenuation Ratio |
x100,x200,x500，x1000 |
|
Rise time |
7ns |
|
Accuracy |
±2% (After 20 minutes of heat up) |
|
Input voltage range |
x100≤700V，x200≤1400V，x500≤3400V，x1000≤7000V |
|
Input voltage range |
3500V |
|
Noise |
≤2.0mV rms |
|
Impedance |
16MΩ//1.2PF |
|
Size |
240*80*30 mm |
View Complete Details
| Model No | PT-5200 |
Specifications:
| PT-5200 differential probe FUNCTION | |
| Differential Voltage(Vp-p) | 1600V |
| Bandwidth (50O load -3dB) | 200MHz ×20, ×50, ×100, ×200 |
| Common Mode Voltage (Vp-p) | 1600V |
| Common Mode Voltage AC/RMS | 560V |
| Range(Switchable) | 4(×20, ×50, ×100, ×200) |
| Input Impedance (Between Input) | 18MO//1.7PF |
| Each Input R//C | 9MO//3.4PF |
| Common Mode Rejection Ratio(CMRR) | 60Hz:>10000:1100hz:>1000:11Mz:>300:1 |
| Noise(Into 50O Load) | =1mV rms |
| Accuracy | =±2% |
| Maximum Output Voltage | =±6V |
| Output Impedance | 50O |
| Input Over Range Indicate | Any Range , Input Voltage Exceed the Max. Voltage 90% |
| Power Auto Regulation System | 5V~12v |
| Power Source | External DC 9V/300mA |
| Accessories | BP-250,BP-266,BP-276N,BP-286,BP-366,BPX-502,ADP-110( ro ADP-220) |
View Complete Details
LOW VOLTAGE DIFFERENTIAL PROBE 60MHZ DP-60HS
₹ 5,500/PieceGet Latest Price
Minimum Order Quantity: 2 Piece
| Model Name/Number | DP-60HS |
- Differential probe: the differential probe is designed to provide a precise and accurate measurement of the current voltage.
- Convenient and easy to use: the differential probe is easy to use, and it can be used for a long time.
- Excellent quality: the probe is made of high-quality aluminum alloy material, which is durable and has a long service life. Specifications:
- exquisite craftsmanship: Small size, lightweight and portable, with exquisite craftsmanship, easy to carry and store.
- universal compatibility: Universal compatibility, suitable for most o cable.
- strict quality control: Products are manufactured by strict accordance with standard specifications, and we will follow factory to achieve a product quality control.
View Complete Details
Leveraging over the skills of our qualified team of professionals, we are engaged in providing supreme quality range of Torque Meter.
Features:
- Excellent quality
- Rust free
- Sturdy construction
View Complete Details
We are the leading organization in the market to offer the best quality range of Light Dependant Resistor.
Specification:
|
LDR |
10 K ohms |
|
Bulb |
12V bulb |
|
Display |
31/2 Digit display to read up to 30mm with variable |
|
Voltage source to the bulb |
|
|
Displacement |
Max 30mm |
Features:
- Reliable
- Smooth performance
- Longer operational life
View Complete Details
need
details