Nature of Business
Distributor / Channel Partner
Total Number of Employees
11 to 25 People
Year of Establishment
Legal Status of Firm
Public Limited Company
Rs. 50 Lakh - 1 Crore
Trader of lubricants, roller bearings and linear motion.
HMS5 and HMSA10
This metric line of rubber outside diameter radial shaft seals is designed in accordance with ISO 6194 and DIN 3760 for use in a wide range of applications. The optimized design provides a very high sealing ability, also at considerable surface roughness, thermal expansion or a split housing. The main features of the new nitrile rubber compound, developed by SKF, are excellent compatibility with synthetic oils and very good pumping ability.
WAVE ® seals
The low-friction WAVE seals with the patented seal lip design are used in a very wide range of applications. The lip has a wave-like form and is efficiently pumping the lubricant back in the cavity while excluding contaminants, regardless of the shaft rotation direction. The wave-like form of the lip creates a wider path on the shaft, which also helps dissipating heat and reducing wear.
The high-performance heavy-duty seals in the HDS7 design consist of a robust metal case, an elastomer body and a springless sealing lip. They are designed for improved grease retention and contamination exclusion. The HDS7 seals are available in three different elastomer materials; NBR, HNBR or XNBR.
HDS1, 2 and 3
The heavy-duty seals in the HDS1, HDS2 and HDS3 designs are the most commonly used metal-cased large diameter seals for general purpose applications. To meet the varying demands, the elastomer part can be manufactured in several different materials; NBR, HNBR, XNBR or FKM.
A SPEEDI-SLEEVE is a very thin-walled wear sleeve that enables the shaft to be held in position during installation and does not require you to specify a different seal size. This thin-walled sleeve has a high quality finish to provide an optimal counterface for a radial shaft seal. The sleeve is simply pushed in position over the worn area providing a sealing surface that is as good as a new shaft, if not better.
SPEEDI-SLEEVE is available for shaft diameters up to approximately 203 mm. In applications where no SPEEDI-SLEEVE is available, SKF recommends the use of SKF large diameter wear sleeves (shaft sizes in the diameter range up to approximately 1 143 mm).
® SKF , SPEEDI-SLEEVE and WAVE are registered trademarks of the SKF Group.
Consisting of three modules - Analyst, Inspector, and Observer - the SKF @ptitude Monitoring Suite forms the basis for a completely integrated approach to condition monitoring. With a familiar WindowsTM interface, this powerful software accepts data from the full range of SKF data collection devices and interfaces with SKF @ptitude Decision Support to facilitate consistent and reliable decision-making.
wide assortment and types, different designs and configurations are available for industrial or specific health care applications, from high load capacities and high operating speeds to quiet and aesthetically designed systems.
SKF provides solutions to driving applications that require transforming rotary action into linear motion. The comprehensive assortment of driving products include: rolled ball screws, roller screws and ground ball screws.
The SKF SYSTEM 24 is a single-point automatic lubricator that can be used to supply grease to single lubrication points that are usually lubricated by means of a grease gun.
SKF SYSTEM 24 lubricators can be set to provide the correct quantity of lubricant over a set time period. This enables more accurate control of the amount of lubricant supplied compared to traditional manual re-lubrication techniques. The SKF SYSTEM 24 is excellent for applications that are difficult to reach with a grease gun, or where a large number of greasing points mean that manual greasing techniques would be less effective.
Advantages of the central lubrication system
The central lubricating system offers the following advantages:
SKF offers nearly all of the standard rolling bearings and accessories required by industrial equipment manufacturers, as well as end-users. This wide assortment of high-quality, high-performance products provides cost-effective solutions for the most demanding applications. SKF has also developed a number of application-specific system solutions that in many cases yield environmentally-friendly, results in the form of reduced lubricant and energy consumption. Some of these SKF solutions go beyond traditional rolling bearings and include other technologies.
The latest SKF Energy Efficient breakthrough is a new family of performance class bearings that have been specially engineered and manufactured to reduce frictional moment by 30% or more beyond the already efficient SKF standard bearings. Reductions can be even more dramatic compared to other manufacturers' bearings.
Because they exhibit ultra low friction, SKF Energy Efficient (E2) bearings enable equipment manufacturers to build greater energy efficiency into their equipment, reducing total cost of ownership for end users. Because they are dimensionally interchangeable with ISO standard bearings, end users can reduce energy use in existing equipment by replacing conventional bearings with SKF E2 bearings.
SKF E2 bearings will be available, off-the-shelf, in common sizes, for a variety of bearing types, starting with single row deep groove ball bearings. In light-to-normal loaded applications such as electric motors, pumps, and conveyors, these ultra low friction bearings offer an excellent way to reduce mechanical friction and thus, energy consumption. Because they can run cooler compared to SKF standard bearings at equivalent loads and speeds, they also may reduce lubricant use and potentially extend the life of equipment. Please note that for extended service life in applications with higher than normal loads, SKF Explorer bearings are still the best choice.
SKF’s extensive experience and knowledge of actuation systems can help satisfy the most demanding requirements utilizing linear actuators, telescopic pillars, rotary actuators, and control units.
wide assortment and types for several applications, quiet, robust, powerful, attractive design.
Whatever the size of your operations or the scope of your requirement, SKF can provide the appropriate condition monitoring and reliability solution for you. And our solutions can be expanded as your needs grow.
Close working partnerships with customers worldwide have provided SKF with an extensive knowledge of applications in virtually every industry. As a result, we have learned to apply today’s most relevant emerging technologies to industry-specific applications.
The SKF Microlog® Analyser GX series data collector/FFT analyzers are designed to enable a user to establish a comprehensive periodic condition monitoring program.
With its large colour-rich display and powerful, modular platform, the GX series advances portable vibration instruments to the next generation of data collectors/analysers. In addition to its full featured route and non-route condition monitoring and analysis features, the GX series can leverage the same modular analysis tools as the microlog MX.
SKF Microlog Analyser CMXA 51-IS - ATEX – intrinsically safe portable data collector/FFT analyser
The SKF Microlog Analyser CMXA 51-IS, an intrinsically safe, rugged and portable, hand-held instrument, enables collection of vibration, process, and dynamic data in hazardous environments. Such industries include petrochemical, water treatment and pharmaceutical, as well as others where IS regulations apply.
The SKF MARLIN I-Pro is part of the SKF family of hand-held mobile computers for Operator Driven Reliability (ODR). ODR, the framework for organizing the activities of plant operations personnel, is key to an organization's reliability maintenance programme. The MARLIN system is the frontline tool for operators, improving reliability and safety through better communication with the plant wide team.
The new MARLIN I-Pro is a rugged, high performance data collector that enables plant operations personnel to quickly and easily collect, store and analyse overall machine vibration, process and inspection data. The unit enables trending, comparison with previous readings, alarm alerts and more. A "user notes" feature enables an operator to immediately record detailed observations of troublesome machine conditions or questionable measurements.
SKF's range of maintenance products includes pullers, fitting tools, heaters, instruments, lubricants, lubricators and oil injection equipment. SKF maintenance products are designed specifically for bearing users and regardless of your bearing size, type or application, the comprehensive product assortment can offer you the appropriate tool for all your bearing maintenance needs.
SKF offers a range of basic products designed for the user who wishes to begin a low-cost condition monitoring programme. Basic instruments assess and report on temperature, oil condition, speed, bearing condition, shaft alignment, noise, vibration and more.
SKF Vibration Pen Plus is a pocket instrument that provides a low-cost multi-parameter approach to condition monitoring.
Our portable monitoring solutions enable maintenance personnel to identify problems on the spot, and collect dynamic machine data which can be analysed offline using our @ptitude Monitoring Suite of software products.
SKF offers a wide variety of portable condition monitoring hardware, including:
SKF Microlog® Analyser MX series portable maintenance instrument
The Microlog MX is, in effect, several instruments combined in a single, fully ruggedised, handheld device. The MX series provides users the flexibility to choose from a range of different testing and analysis applications. The MX modular analysis tools include:
Single-channel transmitters for low-cost continuous monitoring and protection.
Joining the technological know how of different kinds of linear movement SKF can provide complex and complete solutions for positioning through: miniature slides, standard slides, precision slides, complete systems.
By developing its own range of solutions for power transmission, SKF is able to offer well matched products. Thus, giving you a wide choice for better performance at an optimum cost level. SKF power transmission products encompasses belts, pulleys, chains, sprockets, couplings and bushings.
We get the enquiry from our customers and on getting the same we submit our quote and later on the customers send in their orders and on the date stipulated on the purchase order we arrange to supply the materials to the customers and if the customer insists on a test certificate we send the bearings to SKF and after duly inspecting the same we get the certificate from SKF and submit it along with the supplies for the entire satisfaction of our customers.
Ask For Price
Ask For Price
Ask For Price
H M Bros. Limited
No. 39/19, Sun Plaza, Near Gemini Fly Over, G N Chetty Road,
Chennai-600006, Tamil Nadu, India