Hoffmann Quality Tools India Private Limited

Brand Name	Holex
Article No.	436341
Size	0,4/29 mm
Standard	DIN 2270
Scale Divisions	0.01 mm
Measurement Technology	Analogue

Version:High-precision lever dial indicator with jewel-mounted mechanism, in handy, robust design. Housing and dovetail block are of one piece, which means that mounting is particularly rigid. Corrosion protection due to matt chrome-plated housing.
With 1/100 reading.
HOLEX − Economy version with carbide measurement ball.

Application:As an accurate dial bore gauge for testing variations from nominal size, testing concentricity, internal measurements, testing of parallelism, and flatness as well as for aligning components.

Supplied with:Additional clamping spigot ⌀ 4 mm.
Clamping spigot ⌀ 8 mm.

Optional extras:Square holder No. 436510, centring holder No. 436512, articulated holder No. 359680.

Stock : India Warehouse

Brand Name	Holex
Article No.	432240
Size	10/58 mm
Standard	DIN 878
Graduation	0.01 mm
Measurement Technology	Analogue

Version:Dial indicators with protection against splashed water, oil and dirt. Contact point on plunger spindle sealed by rubber bellows, sealed by protective sleeve at the top. Back wall sealed, glass and outer ring tightly screwed. Clamping shank ⌀ 8 mm h6.

Function:IP54: Protected against splashed water from all directions and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Stock : India Warehouse

Brand Name	Holex
Article No.	431980
Size	10/58 mm
Standard	DIN 878
Graduation	0.01 mm
Measurement Technology	Analogue

Version:Dimensions to DIN EN ISO 463, issue June 2006. Precision dial indicators with metal housing, clamping shank ⌀ 8 mm h6, hardened and ground. Outer ring of dial face can be rotated to zero the dial. Central pointer for 1/100 mm reading, small pointer on sub-scale for 1 mm reading.
Outer ring with 2 adjustable tolerance pointers.

Stock : India Warehouse

Brand	Holex
Article No.	441180
Size	120 mm
Throat	178 mm
Magnetic Force	320 N
Magnetic Base Width	30 mm
Magnetic Base Length	36 mm

Version:Mechanical magnetic measuring stand with central locking mechanism. All three joints are clamped in a single action. Continuously adjustable clamping force with high stability. Ball joints enable quick and easy positioning. Magnetic base with rotary switch and Vee sole.

Stock : India Warehouse

Brand	Garant
Standard	EG II
Article No.	462201
Band Length	2.5 m
Tape Width	8 mm
Body Length	48 mm

Version:

• Shock-resistant plastic casing.
• Aluminium inlay on both work faces, giving exact contact surfaces for inside and outside measurement.
• Aluminium profiles resistant to heat and mechanical loads.
• Tape measure stove enamelled, with black characters. Cambered = non-buckling with sliding end hook (for inside and outside measurements). Sharp-contrast, abrasion-resistant rustproof scale.
• Graduations mm / mm (upper / lower edges).
• Viewing window scale reads in the same direction as the tape.

Stock : India Warehouse

Brand	Holex
Article No.	465540
Size	60 m
Power Supply	Battery-powered
Length	110 mm
Width	46 mm
Height	28 mm

Version:Attractively-priced laser distance measurement device for quick and easy performance of standard measurement tasks. Ergonomically shaped 2-component casing. Soft-touch keyboard with self-explanatory symbols. Background lighting of LCD display can be activated. Graphical symbols in the display support the user during measurement operations. Laser class 2.

Function:IP54: Protected against splashed water from all directions and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.

Accuracy:Deviation ± 1.5 mm over a 10 m measuring length under optimum conditions.

Stock : India Warehouse

Brand Name	Holex
Article No.	433410
Size	10/58 mm
Standard	Manufacturer's standard
Graduation	0.001 mm
Measurement Technology	Analogue

Version:Strong, satin chrome plated brass casing; unbreakable dial glass.
Clamping shank ⌀ 8 mm h6, hardened and ground.
High accuracy version.
The most important parts of the mechanism are jewel-mounted.
Central pointer for 1/1000 mm reading.
Outer ring of dial face can be rotated to zero the dial.
Nearly constant measuring force over the entire measuring range.
Dimensions to DIN EN ISO 463, issue June 2006.

Stock : India Warehouse

Brand	Holex
Article No.	441210
Cross Arm	10 mm
Cross Arm Length	150 mm
Connection Thread	M8 external thread
Magnetic Base Length	60 mm

Version:Magnetic measuring stand with fine adjustment. Stable column with longitudinally adjustable cross arm. Magnetic base with Vee sole and rotary switch. Dial indicator holder for clamping shanks ⌀ 6 mm and ⌀ 8 mm.

Stock : India Warehouse

Type	Single Column
Measuring Range	300 mm
Usage/Application	Height Measurements
Brand	Holex
Article No.	443720
Standard	Manufacturer's standard
Vernier	1/50 mm
Size	300 mm
Accuracy	0.02 mm
Error Limit	0.06 mm

Version:Strong and sturdy base with a lapped standing surface. With measuring beam for fine adjustment, magnifying glass and locking screw. Reading 0.02 mm. Reading zero and marking scriber are adjusted with reference to the bottom of the base (marking out from “0”). Drawing dimensions can therefore be transferred directly without the risk of calculation errors. The scriber is carbide tipped and is longitudinally adjustable by 140 mm (e.g. where access is difficult). Slim design of the scriber for scribing in narrow slots. Ergonomic shape of the foot prevents collisions between the scriber and the hand.

Stock : India Warehouse

Tape Length	3m
Usage/Application	Construction
Material	Plastic
Brand	Holex
Digital	No
Country of Origin	Made in India
Article No.	462010
Standard	EG II
Body Length	65mm
Blade Width	5mm
Tape Width	13mm

Version:Plastic casing with removable belt clip. Automatic tape return and stop, with damping effect. Sliding end hook.
Tape measure printed black/red on yellow. Casing in yellow with black rubber coating (except size 2)

Stock : India Warehouse

Brand	Holex
Material	Stainless steel
Article No.	443805
Standard	Manufacturer's standard
Size	300 mm
Error Limit	0.06 mm

Version:Strong base with lapped standing surface. Reading 0.02 mm with fine adjustment. The scriber is carbide tipped. With adjustable measuring beam, magnifying glass and locking screw.

Stock : India Warehouse

Accuracy	0.01 mm
Type	Single Column
Measuring Range	300 mm
Brand	Holex
Marking Height	300 mm
Article No.	443850
Standard	Manufacturer's standard
Size	300 mm
Scale Divisions	0.01 mm

Version:Digital height gauge and marking out system with fine adjustment. Sturdy stand with ground base.
Easily legible LCD display. Scriber carbide tipped.

Function:Zeroing possible in any position.
Hold function (HOLD).
ABS / INC / TOL and SET.

Stock : India Warehouse

Power Supply	Battery Powered
Size	12.5 mm
Brand Name	Holex
Article No.	434004
Reversible Reading	0.01 mm
Measurement Technology	Digital

Version:Digital dial indicator in compact design with high-contrast digital display.

• Reversible direction of measurement.
• Very narrow casing.

Supplied with:Supplied with an eye on the cover and 1 battery No. 081560 size CR2032.

Stock : India Warehouse

Brand	Holex
Article No.	467435
Size	300 mm
Error Limit in Normal Position	0.5 mm/m
Length (mm)	300 mm
Type of Product	Spirit Level

Version:Sturdy powder-coated aluminium profile.

Stock : India Warehouse

Brand	Holex
Article No.	467436
Size	300
Error limit in normal position	0.5 mm/m
Length (mm)	300 mm
Type of product	Spirit level

Version:Sturdy anodised aluminium profile with powerful permanent magnets.

Stock: India Warehouse

Brand	Holex
Article No.	473010
Display Range AC	50 V
Overvoltage Category	CAT IV / 1000 V
Type of product	Voltage Tester
Number of batteries contained	2

Version:Compact two-component plastic casing with integral LED torch. Prods with visual indication of voltage by colour change (green to red) and additional acoustic signal. Easily transported, fits any pocket.


Function:IP40: Protected against penetration by foreign bodies with ⌀ > 1 mm, however tools and wires should be kept away, and offers no protection against water.

Application:For non-contact detection of live conductors, e.g. in cables, sockets, junction boxes etc.

Stock : India Warehouse

Brand	Holex
Article No.	473011
IP Index of Protection	IP 67
Display Range AC	12 V
Overvoltage Category	CAT IV / 1000 V
Power Supply	Battery-powered

Version:Compact two-component plastic casing with integral LED torch. Prods with visual indication of voltage by colour change (green to red) and additional acoustic signal. Easily transported, fits any pocket.
Additional illumination of probe points and 12 V mode for low voltages.

Function:IP67: Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.

Application:For non-contact detection of live conductors, e.g. in cables, sockets, junction boxes etc.

Stock : India Warehouse

Number of Blades	13
Size	0.05 mm
Brand	Holex
Article No.	478200
Accuracy	T2
Blade Thicknesses	0.05 mm
Blade Length	100 mm

Version:Hard spring steel blades, clearly labelled. Equal width steel blades, pivoted on a riveted joint to fold away. Tapered steel blades. In nickel-plated casing, with clamp.

Stock : India Warehouse

Number of Blades	20 Blades
Size	0.05 mm
Brand	Holex
Material	Brass
Article No.	478210
Accuracy	T2
Blade Length	100 mm

Version:Hard spring steel blades, clearly labelled. Equal width steel blades, pivoted on a riveted joint to fold away. Tapered steel blades. In nickel-plated casing, with clamp.

Feeler gauge with brass blades. Non-magnetic, tapered, 100 mm long, 12 mm at widest, accuracy class T2.Feeler gauge.

Stock: India Warehouse

Size	0.01 mm
Brand	Holex
Material	Carbon Steel
Article No.	478502
Standard	Works standard
Tolerance	T3
Roll Length	5 m

Version:Cold rolled, hard spring feeler strip steel of maximum precision. From size 0.02, the strip thickness is continuously marked and cannot be wiped off (exception: for No. 478502 from size 0.08).
Stored in a practical dispenser; pull out like a tape measure. The desired length can be cut from the 5 or 10 m long strip.
C-steel − Carbon steel, material No. 1.1274, cold rolled, hardened, bright surface. (size 0.01 and 0.02 stainless).

Application:In jig and tool building for aligning and adjusting machine parts, as a shim for aligning components, for tolerance measurements of all kinds, for checking fits and guides, for setting up printing rollers.

Stock : India Warehouse

Size	0.01 mm
Brand	Holex
Material	Stainless Steel
Article No.	478507
Standard	Works Standard
Tolerance	T3
Roll Width	12.7 mm

Version:Cold rolled, hard spring feeler strip steel of maximum precision. From size 0.02, the strip thickness is continuously marked and cannot be wiped off (exception: for No. 478502 from size 0.08).
Stored in a practical dispenser; pull out like a tape measure. The desired length can be cut from the 5 or 10 m long strip.
Non-rusting acid-resistant stainless steel, material No. 1.4310 (or 1.4301 for thickness 0.005−0.05 mm), cold rolled, spring hardened, bright surface.

Application:In jig and tool building for aligning and adjusting machine parts, as a shim for aligning components, for tolerance measurements of all kinds, for checking fits and guides, for setting up printing rollers.

Stock : India Warehouse

Brand	Holex
Accuracy	2
Article No.	452600
Stock Length	75x50 mm
Right Angle Tolerance	0.028 mm
Type of Product	Try squares

Version:All faces and edges ground. Inspection test faces ground.

Application:For accurate general workshop work.

Accuracy:DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030 mm.

Brand	Holex
Article No.	447115
Length	70 mm
Width	55 mm
Height	75 mm
Type of Product	Vee Block

Version:Three magnetic contact faces (small Vee, large Vee, upper and lower faces activated simultaneously). All faces hardened. The front and side faces are ground at right angles to the Vee blocks. Flatness and parallelism tolerance 0.01 mm.

Stock: India Warehouse

Brand	Holex
Article No.	447125
Length	70 mm
Width	55 mm
Height	75 mm
Type of Product	Vee Block

Version:Three magnetic contact faces (small Vee, large Vee, upper and lower faces activated simultaneously). All faces hardened. The front and side faces are ground at right angles to the Vee blocks. Flatness and parallelism tolerance 0.01 mm.
The Vee blocks are ground as a matched pair.

Stock : India Warehouse

Brand	Holex
Article No.	452590
Size	75x50 mm
Standard	DIN 875
Accuracy	2
Right Angle Tolerance	0.028 mm

Version:All faces and edges ground. Inspection test faces ground.

Application:For accurate general workshop work.

Accuracy:DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030 mm.

Stock : India Warehouse