Hydac India Private Limited

up to 250 bar

up to 12.6 l/min

suitable in accordance with EN60034-1

for short-term operation S2

for intermittent duty S3

GENERAL

• Very compact and low-noise, because motor pump group is installed under the oil in the tank
• High leakage safety and stability through continuous steel tanks
• Minimum installation dimensions resulting from small flange dimension
• Simple electrical installation through standard terminal board at the front
• High performance density through smallest possible installation size conditions
• CHARACTERISTICS
• Delivery rate: 1.3 to 12.6 l/min
• Operating pressure: max. 250 bar
• Switch-on duration: S2 (short-term operation) S3 (intermittent duty)
• Motor: Pn = 0.55 KW ... 3.0 KW
• Motor voltages: 3Ph. 230/400V -50 Hz (others upon request)
• IP rating: DIN EN 60034-5 min IP54
• Pump parameters Vg.: 1.0 cm³/rev. ... 4.75 cm³/rev
• Tank volume: 5.0 – 9.0 l
• Discharge volume: 2.5 – 7.3 l
• Operating fluid:hydraulic oil according to DIN 51524 part 1 and 2
• Viscosity range: 10 – 380 mm²/s is recommended
• Filtration: Max. permissible degree of contamination of the operating fluids in accordance with ISO 4406 Class 21/19/16
• Cooling: Convection cooling
• Weight: from 12 to 24 kg
• Return quantity: up to max. 25 l/min
• Installation position: vertical, horizontal
• Operating fluid temperature: -20°C to max. +80°C
• Ambient temperature range: -20°C to max. +40°C

Details in the brochure 5.305.3

GENERAL

• Minimum installation dimensions resulting from small flange dimension
• Very low noise, thanks to special design
• Different hydraulic controls possible in the same flange, through flexible
• equipment with cartridge valves and/or flanging-on of manifolds and stacking systems.

• Flow rate: up to 18.4 l/min
• Operating pressure: max. 250 bar
• Peak pressure: up to max. 300 bar (upon request)
• Switch-on time: S2 (short-term operation) S3 (intermittent duty)
• Motor: Pn = 1.7 KW ... 3.0 KW
• Motor voltages: 12 and 24 Volt
• IP rating: DIN EN 60034-5 min IP54
• Pump parameters Vg.: 1.0 cm³/rev. ... 8.0 cm³/rev
• Tank volume: 1.8 – 8.4 l
• Discharge volume: 1.2 – 7.8 l
• Operating fluid:hydraulic oil according to DIN 51524 part 1 and 2
• Viscosity range: 10 – 380 mm²/s is recommended
• Filtration: Max. permissible degree of contamination of the operating fluids in accordance with ISO 4406 Class 21/19/16
• Cooling: Convection cooling
• Weight: from 15 to 25 kg
• Return flow: up to max. 40 l/min
• Installation position: vertical, horizontal
• Operating fluid temperature: -20°C to max. +80°C
• Ambient temperature range: -20°C to max. +40°C

Details in the brochure 5.307.0

All of the components produced by HYDAC which are used in the power unit, like valves, coils, sealing sets, etc., as well as connectors and mini-measurement couplings, can be ordered as replacement parts by the customer.

Short delivery times ensure short downtimes.

GENERAL

• Minimum installation dimensions resulting from small flange dimension
• Different hydraulic controls possible in the same flange, through flexible loading with cartridge valves and/or flanging-on of control blocks and series function modules
• Very low noise, thanks to special design

CHARACTERISTICS

• Delivery rate: up to 20 l/min
• Operating pressure: max. 250 bar
• Peak pressure: up to max. 300 bar (upon request)
• Switch-on time: S2 (short-term operation) S3 (intermittent duty)
• Motor: Pn = 0.37 KW ... 3.0 KW (4; 5.5 KW upon request)
• Motor voltages: 3Ph. 230/400V -50 Hz (others upon request)
• IP rating: DIN EN 60034-5 min IP54
• Pump parameters Vg.: 1.0 cm³/rev. ... 10.0 cm³/rev
• Tank volume: 1.8 – 8.4 l
• Discharge volume: 1.2 – 7.8 l
• Operating fluid:hydraulic oil according to DIN 51524 part 1 and 2
• Viscosity range: 10 – 380 mm²/s is recommended
• Filtration: Max. permissible degree of contamination of the operating fluids in accordance with ISO 4406 Class 21/19/16
• Cooling: Convection or air cooling
• Weight: from 12 to 20 kg
• Return quantity: up to max. 40 l/min
• Installation position: vertical, horizontal
• Operating fluid temperature: -20°C to max. +80°C
• Ambient temperature range: -20°C to max. +40°C

Details see brochure: 5.306.0

• High specific performance with simultaneously compact construction
• Simple electrical installation by means of terminal boxes in the upper part of the power unit
• Radial piston pump with oil-immersed motor in stable housing
• Very low noise emissions due to noise-reducing cast housing
• Versatile controls available

• Flow rate: 0.3 to 5.25 l/min
• Operating pressure: max. 500 bar
• Switch-on time: S2 (short-term operation) S3 (intermittent duty)
• Motor: Pn = 1.2 KW ... 2.2 KW
• Voltages: 3 Ph. 230/400V -50 Hz (others upon request)
• IP rating: DIN EN 60034-5 min IP54
• Pump parameters Vg.: 0.3 cm³/rev. ... 5.25 cm³/rev
• Tank volume: 1.1 – 7.0 l
• Discharge volume: 0.7 – 5.8 l
• Operating fluid:hydraulic oil according to DIN 51524 part 1 and 2
• Viscosity range: 10 – 380 mm²/s is recommended
• Filtering: Maximum permissible degree of contamination of the operating fluid in accordance with ISO 4406 Class 21/19/16
• Cooling: Convection cooling / air cooling
• Weight: from 7.2 to 25.7 kg
• Return quantity: up to max. 10 l/min
• Installation position: vertical
• Operating fluid temperature: -20°C to max. +80°C
• Ambient temperature range: -20°C to max. +40°C

Details in the brochure 5.301.6