Hydax Hydraulics Private Limited

Bengaluru, Karnataka
Send SMS
Send E-mail

How it Works
Tell us what you need by filling in the form
Receive Verified supplier details
Compare Quotations and seal the deal
X
I agree to the terms and privacy policy

Other Products

Manufacturer of a wide range of products which include Fluid Level Gauge(Sg Series), Fluid Level Gauge (Sgr Series), Iller Breather Assembly, Flexible Drive Coupling, Return Line Filter and Cartridge.

Request Callback
Fluid Level Gauge(Sg Series)
Ask For Price

Fluid Level Gauge(Sg Series)

Get Price

Hydax fluid level gauge can be used on any reservoir containing mineral and petroleum-based hydraulic fluid to indicate oil level. It is ideally suited to hydraulic reservoirs in industrial, marine and mobile equipment, gear boxes, lubrication oil tanks and crank cases. The fluid level gauge:

  • is available in two sizes – 3" and 5" between bolt centres.
  • has a sturdy and low profile outer case.
  • is ready for immediate installation; complete with gaskets and attaching bolts.
  • requires only two mounting holes for installation.
  • should be installed on a smooth and level surface.
  • has all external metal parts plated and, or powdered coated.
  • has a large and clear sight area providing high visibility.
  • is available with optional temperature gauge.
Yes! I am interested

Request Callback
Fluid Level Gauge (Sgr Series)
Ask For Price

Fluid Level Gauge (Sgr Series)

Get Price

Hydax fluid level gauge (sgr series) can be used on any reservoir containing mineral and petroleum-based hydraulic fluid to indicate oil level. It is ideally suited to hydraulic reservoirs in industrial, marine and mobile equipment, gear boxes, lubrication oil tanks and crank cases. The fluid level gauge:
   
 
   

    * is available in five sizes - 3", 5", 7", 10" and 14" between bolt centres.
    * is of a new-age design with 'o' ring sealing.
    * has a sturdy and low profile outer case.
    * is ready for immediate installation; complete with attaching bolts.
    * requires only two mounting holes for installation.
    * should be installed on a smooth and level surface.
    * is made from high grade compound plastic (3", 5" and 7") and aluminium and sheet metal (10" and 14").
    * has all external metal parts plated and, or powdered coated.
    * has a large and clear sight area providing high visibility.
    * is available with optional temperature gauge.

Yes! I am interested

Request Callback
Iller Breather Assembly
Ask For Price

Iller Breather Assembly

Get Price

HYDAX Filler Breathers are a combination unit for filtering air displacement to the reservoir and straining oil while filling. They are a must for hydraulic systems ensuring clean air passes into the reservoir, thus prolonging the life of the system components. When used as a crankcase ventilator, it helps to prolong the life of the engine oil and the oil filter. They are used in machine tool construction, mining, marine and agricultural equipments. The Filler Breather Assembly:
   
       
   
   
   

    * is available in Tank Top (TT) and Side Mounting (SM) options.
    * has displacement capacities of 250 LPM and 700 LPM.
    * has standard filtration of 40 microns.
    * displaces air from underneath the cap thereby improving performance.
    * is compatible with all fluids.
    * parts are powder coated and or made from high grade plastic ensuring non-corrosion.
    * has a Safety chain to prevent misplacement while filling oil or cleaning the filter.
    * is a ready to install package with fasteners and safety chain.
    * needs to be mounted on a flat and clean surface free of burrs to provide a good sealing


Additional Information:
  • Item Code: FB250SM40
Yes! I am interested

Request Callback
Flexible Drive Coupling
Ask For Price

Flexible Drive Coupling

Get Price

Hydax flexible drive coupling consists of two metal gear hubs engaging in a sleeve of high-grade plastic material. Its use is applicable to the whole range of hydraulic equipment and in transmission areas. The flexible drive coupling:
   
 
   

    * is available in five sizes to suit 1 hp to 75 hp.
    * has crowned tooth form gears permitting axial and maximum angular misalignment of 1. 5 degrees.
    * is easy to assemble and require no maintenance or lubrication.
    * has superior material and can withstand wide operating temperatures and severe load conditions.
    * has no transmission noise.

Yes! I am interested

Request Callback
Return Line Filter
Ask For Price

Return Line Filter

Get Price

Hydax return line filter is intended for direct mounting on the hydraulic reservoir in mobile installations as well as stationary applications like machine tools, plastic machinery, etc. The return line filter:
   
 
   

    * is available in 6 sizes with port sizes of ½" bsp, ¾" bsp, 1" bsp, 1 ¼" bsp and 1 ½" bsp for flows up to 450 lpm.
    * has filtration options of 10 microns and 25 microns in each size.
    * can withstand maximum pressure of bar.
    * comes with an optional visual clogging indicator.
    * contains a magnet built in to arrest ferrous particles in the system.
    * has a by-pass check valve to handle excess pressure due to clogging.
    * allows easy replacement of the filter cartridge without disturbing the plumbing.
    * requires one inlet fitting and discharges directly into the reservoir.
    * has an outlet suitable for hose connection thereby reducing the installation cost.

Yes! I am interested

Request Callback
Cartridge
Ask For Price

Cartridge

Get Price

HYDAX Cartridge for Return Line Filter is the replacement filter element used in all return line filters. The Cartridge :
   

    * is made from high grade impregnated paper to ensure the desired micron rating.
    * comes in six sizes to match the corresponding return line filters.
    * has filtration ratings of 10 microns and 25 microns in each model.
    * is made with a generous filtration area for longer intervals between cartridge changes.
    * has a by-pass check valve to handle excess pressure due to clogging.
    * Is interchangeable with competitive models.

 


Additional Information:
  • Item Code: CRLF0410
Yes! I am interested

Request Callback
Suction Strainers
Ask For Price

Suction Strainers

Get Price

Hydax suction strainers are suitable for filtering hydraulic fluids, coolants, cutting fluids, lubricants and mineral oils and can function upto a maximum temperature of 90 deg c. They extend the life of the equipment and reduce breakdown by continuous filtering action, thereby protecting the pump and system components from damage due to clogging. The strainers can be reused after cleaning with petrol or similar fluids. The suction strainers:
   

    * come in a range of flows from 15 lpm (3 gpm) to 450 lpm (100 gpm) and thread sizes of ½" bsp to 3" bsp.
    * have a standard filtration of 149 microns.
    * construction consists of a stainless steel filtering media, supported by inner plated perforated sheet and affixed with epoxy bonding material to plastic/aluminium alloy/sheet metal top and bottom caps.
    * have a one-piece top cap head adaptor construction to avoid severing.
    * can withstand extremely low pressure drops.
    * can work upto a maximum temperature of 90 deg c.
    * are versatile to handle a wide variety of system fluids.

Yes! I am interested

Request Callback
In Line Filter
Ask For Price

In Line Filter

Get Price

Hydax in line filter is designed for use with all types of mineral and petroleum based hydraulic fluids and can be connected anywhere in the return line of a hydraulic system. The in line filter:
   
 
   

    * comes in four sizes for flows upto 600 lpm with fluid viscosity of 80 ssu at 40 deg celsius.
    * has filtration options of 10 microns and 25 microns.
    * operates under working pressure of 15 kg/cm2.
    * has strong ferrite magnets in the flow path to arrest ferrous particles.
    * is made with a built in by-pass valve in cases of clogging.
    * body is made from high grade casting.


Additional Information:
  • Item Code: ILF600810
Yes! I am interested

Request Callback
Pressure Line Filter
Ask For Price

Pressure Line Filter

Get Price

Hydax pressure line filter is ideal for application in simple hydraulic systems. It provides reliable protection to dirt sensitive parts. The pressure line filter:
   
 
   

    * is available in 10 micron, 25 micron and 75 micron ratings.
    * has a maximum working pressure of 140 bar.
    * has a flow rate of 20 lpm.
    * uses sintered bronze filter cartridges to provide absolute filtration.
    * is made from high grade castings and has nitrite rubber sealing.

Yes! I am interested

Request Callback
Gauge Isolator Valve
Ask For Price

Gauge Isolator Valve

Get Price

Hydax gauge isolator valve protects the pressure gauge from damage due to pressure surges, hydraulic shock and mechanical vibrations. The fluid is completely isolated from the gauge and connected directly to the gauge port as long as the knob is kept pressed thereby giving instant and accurate readings on the gauge. On release of the knob, the spring-loaded valve closes automatically to connect the gauge port to the tank by blocking the pressure port. An orifice in the gauge port acts as a partial snubber and protects the gauge from the initial surge of fluid when the knob is pressed. The single station gauge isolator valve:
   
 

    * has a 3000 psi working pressure.
    * comes with a guarantee of below 5cc/min. Drain leakage in a new valve.
    * can work between temperatures of -34. 44° c (-30° f) and 115. 56° c (240° f).
    * is made from a high grade investment casting body.
    * requires minimum force to operate.
    * has easy plumbing into the system.
    * is tested 100% under rigid parameters.
    * can be panel or line mounted.
    * meets most operating conditions.

Yes! I am interested

Request Callback
Gauge Isolator Valve
Ask For Price

Gauge Isolator Valve

Get Price

Hydax gauge isolator valve - multi station is the first of it's kind anywhere. The two, three and four isolator valves are made from a single block and protect the pressure gauges from damage due to pressure surges, hydraulic shock and mechanical vibrations. The fluid is completely isolated from the gauges and connected directly to the gauge ports as long as the knob is kept pressed thereby giving instant and accurate readings on the gauges. On release of the knob, the spring-loaded valve closes automatically to connect the gauge ports to the tank by blocking the pressure port. An orifice in the gauge port acts as a partial snubber and protects the gauges from the initial surge of fluid when the knob is pressed. The multi station gauge isolator valves:
   
 

    * have a 3000 psi working pressure.
    * come with a guarantee of below 5cc/min. Drain leakage in a new valve.
    * can work between temperatures of -34. 44° c (-30° f) and 115. 56° c (240° f).
    * are made from a high grade cast iron body.
    * require minimum force to operate.
    * have only one gauge and one drain line for all the ports thereby enabling easy plumbing into the system and reducing additional instrument costs.
    * have ¼" bsp port sizes and can be easily mounted on panels.
    * have all plumbing from the rear.
    * are tested 100% under rigid parameters.
    * meet most operating conditions.


Additional Information:
  • Item Code: GIMSPR-2
Yes! I am interested

Request Callback
Single Pilot Check Valve
Ask For Price

Single Pilot Check Valve

Get Price

Hydax single pilot check valve is used to lock a cylinder or part of a circuit and to prevent reverse flow until the pilot pressure is applied. The purpose of the check valve is to permit flow in one direction and block it in the opposite direction. In a free flow direction through the inlet, the ball is unseated and the flow is out of the cylinder port. When the control valve is centered, the load is locked. With presssure applied at the pilot piston, the ball is held open thereby allowing return flow. The mechanism is internally piloted. The directional valve cylinder ports should be connected to the tank in the centre condition. The single pilot check valve:
   
 

    * body is made of extruded aluminium alloy.
    * has internal parts made of hardened steel.
    * has a rated flow of 30 lpm.
    * functions with a working presssure of 210 kg/cm3.
    * has a damped pilot piston to reduce damaging shocks.
    * comes with easily replaceable seats in some models


Additional Information:
  • Item Code: PCV03T
Yes! I am interested

Request Callback
Double Pilot Check Valve
Ask For Price

Double Pilot Check Valve

Get Price

Hydax double pilot check valve is used to lock a cylinder or part of a circuit and to prevent reverse flow until the pilot pressure is applied. The purpose of the check valve is to permit flow in one direction and block it in the opposite direction. In a free flow direction through the inlet, the ball is unseated and the flow is out of the cylinder port. When the control valve is centered, the load is locked. With presssure applied at the pilot piston, the ball is held open thereby allowing return flow. The mechanism is internally piloted. The directional valve cylinder ports should be connected to the tank in the centre condition. The double pilot check valve:
   
 

    * body is made of extruded aluminium alloy.
    * has internal parts made of hardened steel.
    * has a rated flow of 30 lpm.
    * functions with a working presssure of 210 kg/cm3.
    * has a damped pilot piston to reduce damaging shocks.
    * comes with easily replaceable seats in some models.

 


Additional Information:
  • Item Code: DPCV03T
Yes! I am interested

Request Callback
Water Filter Housing
Ask For Price

Water Filter Housing

Get Price

The fwh series fiter housings are suitable for flow rates upto 900 lpm using 10" to 40" cartridge filters. The flow capacity of the housings in standard series

3 element housing
   
6 element housing
3l0 fwh upto 110 lpm
   
610 fwh upto 220 lpm
320 fwh upto 220 lpm
   
620 fwh upto 440 lpm
330 fwh upto 330 lpm
   
630 fwh upto 660 lpm
340 fwh upto 440 lpm
   
640 fwh upto 880 lpm
   
 


the housing is made of fiberglass reinforced plastic (frp) and the housings have an internal lining. The inlet and outlet ports are located at the bottom cover and have bsp threading. The design provides for easy disassembling in order to clean and change the cartridge. The housings are suitable to accommodate double open ended (doe) and 'o' ring cartridge configurations.

while the housings are rated for working pressure of 10 kg/cm2 and tested upto 20 kg/cm2 , higher pressure rated ones too can be made in case of specific requirements. Suitable for temperature ranges upto 50°c. The externals are made of anodised aluminium or stainless steel. A provision for vent and pressure gauge has been provided.

salient features
1. A glass filter/epoxy bonded outer layers with food grade lining inside.
2. Test pressure upto 20 kg/cm2.
3. Available in tierod version or flanged version with bolt and nut.
4. All internal components are made of food grade compatible material.
5. The 3-element housings have 1½" bsp connections and the 6-element ones have 2" bsp     connections for the inlet and outlet.
6. Both the inlet and outlet are from the bottom of housing.
7. A suitable pressure gauge port and vent port is provided on top of the flange.
8. It can accommodate standard 62 mm od double open ended (doe)
    elements.
9. Optional 40 kg/cm2 housings can be made available.

Yes! I am interested

Request Callback
Threaded Breather
Ask For Price

Threaded Breather

Get Price

HYDAX Threaded Breather is a unit for filtering air displacement to the reservoir. It is to be fixed on hydraulic or lubrication oil reservoirs in applications such as machine tools, mobile equipment and industrial machinery. The Threaded Breather:
   
 

   

    * has displacement capacities of 25 LPM and 700 LPM
    * has a standard filtration of 40 microns.
    * is available in a large variety of thread sizes.
    * displaces air from underneath the cap thereby improving performance.
    * all parts are plated and or powder coated for corrosion resistance.


Additional Information:
  • Item Code: HYDAX19
Yes! I am interested

Request Callback
Iller Breather Assembly
Ask For Price

Iller Breather Assembly

Get Price

iller breather assembly


Additional Information:
  • Item Code: FB250TT40
Yes! I am interested

Fluid Level Gauge

Ask For Price

Flexible Drive Couplings

Ask For Price

Return Line Filters

Ask For Price

In Line Filters

Ask For Price

Reach Us

Gmap

Hydax Hydraulics Private Limited P.O. Box 4824, Mahadevapura Post,
Bengaluru-560048, Karnataka, India

Meetali Mukherjee ( Manager )
Send SMS
Send E-MAIL

Share Us:


We are here to Help You!
Go Mobile : Follow Us On :
Copyright © 1996-2018 IndiaMART InterMESH Ltd. All rights reserved.