Infusil India Private Limited

• Spindle Bore - 120mm / 150mm
• Centre Height above bed - 450mm to 650m
• Bed Length between spindle flanges - 1500mm / 2000mm.

Machine is equipped with 2 nos. 3-jaw precision ring chunks with special clamping jaws made of alloy steel and provided with taper wedges for eliminating any play in the jaws ensuring perfect parallel clamping. Steplessly variable D.C. Motor for connection to 110/230 volts AC Single phase, 50 cycles.

Standard Accessories:

• I piece blowing swivel with holder
• I set tools.
• Electro-magnetic brake incorporated in the machine
• Clutch for tailstock spindle incorporated in the machine.

• Hardened and ground and therefore wear-resistant dual cylindrical guide ways in combination with the throughout machined base, stress relieved.
• Sensitive, precise movement of the movable machine components by means of linear ball-bushings
• Closed stainless steel cover above bed for optimum protection against heat radiation and dust.
• Spindle drive by service-free electro-drive via potentiometer (from 0 position until the factory adjusted max. Speed) steplessly variable through a DC Motor.
• Power transfer to working spindles via easily adjustable precision roller or double roller chains
• Revolving directions of spindles changeable by means of a selector switch
• Working spindle of the tailstock can be declutched by means of mechanical clutch
• Declutched spindles can be fixed by means of a special clamping unit
• Machines are equipped with an electromagnetic brake, which can be switched on or off, so that the working spindles come to an immediate stand-still, and are blocked for easy opening and closing of the scroll chucks. The brake releases automatically when the machine is started again.

Please send the requirements with full details and mentioned the quantity as well.

We offer Flair Hand Torch.

This scientific glass blowing torch can be used with LPG/Oxygen, town gas/oxygen or natural gas/oxygen. It is a general-purpose hand torch used at the bench, vacuum line or at the lathe. Suspension hook is provided for lathe use. It can be mounted on the table. Flair torch is of brass construction an nickel-plated. Overall length is 225mm. There are 6 pilot jets for different flame range. Pilot jets are in brass; stainless steel jets are also available.

Please send the requirements with full details and mentioned the quantity as well.

• Solid welded construction, stress relieved.
• Precision hardened and ground, more taper 3 collett for accommodating tapered grinding tools for ground joints.
• Equipped with variable speed pulley/ frequency drive.
• 1/2 HP (360 watts), 230 volts single phase AC, 50Hz.
• Equipment can be clamped on table or can be mounted on anti vibration rubber

Applications:

• Cabinet stand with pump and tank.
• Coolant pump with tank.
• Power feed.

UNIVERSAL CUTTING SAW - TABLE MODEL:

Universal Glass Cutting Machine, Table model is rugged in construction and equipped with a tiltable head. The machine is made of cast aluminium alloy and stainless steel to prevent corrosion.

The spindle assembly is of stainless steel and is supported on angular contact bearings with ends sealed to give longer life to the bearings. Spindle runout is less than 10 microns thus ensuring extra long life for the diamond saw blade and guaranteeing a smooth cut.

The machine is equipped with a 3 phase, 0.5 HP/1.0 HP motor, 440 volts AC. The tiltable head is supported on precision ground and polished stainless steel arbour with locking arrangement. The support table slides on polished steel guideways.

• The cutting machine can now take wheels of diameter of 150, 200, 250mm. The corresponding models being UCS/TM/150, UCS/TM/200, UCS/TM/250.
• The sliding table has a longer stroke length. Stroke length being 300mm.
• Belt guard covers both sides of the belt and is now made of fibreglass.
• Support table slides on polished guideways fully protected.
• Special stainless steel guard for motor.
• Special attachment for tube cutting.
• Special stopper for adjusting stroke.
• The front is protected from water spray through a perspex guard.
• Spindle housing has now been reduced so that there is more gap between it and the table top.
• Stainless steel spindle end is easily accessible for easy dismantling of the wheel.
• Wheel guard can be tilted up and down to adjust cutting clearance/visibility and can be locked at any position.
• T-slot on sliding table to accommodate any fixture or extra attachment.
• Can now be equipped with variable speed drive for other applications like cutting glass, ceramics, plastic, rubber, paper, wood etc., (At extra cost)

Please send the requirements with full details and mentioned the quantity as well.

Additional Information:

• Item Code: TableModel

• Hardened and ground and therefore wear-resistant dual round bar guide in combination with the throughout machined base, stress relieved.
• Sensitive, precise movement of movable machine components by means of linear ball-bushings, which can be adjusted via, tapered sleeves

Without play.

• Closed Stainless steel cover above bed for optimal protection against heat, radiation and dust.
• Spindle drive by service free electro drive via potentiometer steplessly variable.
• Power transfer to working spindles via easily adjustable precision roller or double roller chains.
• Revolving directions of spindles changeable by means of selector switch.
• Working spindle of the tailstock, can be declutched by means of a mechanical clutch. For headstock this clutch is available as option.
• Declutched spindles can be fixed by means of a special clamping unit
• Working spindles have plane flange on both sides to accept chucks on the outer flange as well.
• Machine is equipped with an electromagnetic brake for immediate stand still and is blocked for easy opening and closing of the scroll-chucks. The brake releases automatically when the machine is started again.
• Steplessly variable D.C motor for connection to 110/230 V, AC single phase, 50 cycles.
• The machine is supplied with two 3-jaw ring chucks with special clamping jaws made of alloy steel and provided special clamping jaws made of alloy steel and provided

Standard Accessories:

• One piece blowing swivel with holder
• Electro-magnetic brake incorporated in the machine
• Clutch for Tailstock spindle
• One set tools

Optional Accessories at extra cost:

• On / Off foot pedal switch
• Burners to suit application

• Equipment is suitable for laping, grinding and polishing of hard materials.

• The lathe bed is of special casting, well machined and stress relieved.
• Burner carriage and tailstock have smooth precision movement on hardened and ground flat guide ways.
• Spindle drive is by DC motor using roller chains and sprockets.
• Clockwise and anticlockwise rotation of the spindle is by a selector switch.
• Spindle rotation can be varied continuously.
• Tailstock can be declutched by a mechanical clutch.
• The bed guide ways and the moving parts are protected against heat and dust by a cover.
• Both headstocks have provision for internal blowing.
• The machine is supplied complete with motor,controller and a pair of ring chucks.
• The machine is equipped with an electromagnetic brake for immediate stand still and is blocked for easy opening and closing of the scroll chucks. The brake releases automatically when the machine is started again.

• Durable
• Cost Effective

Please send the requirements with full details and mentioned the quantity as well.

We offer Glass Working Lathe - Mini Series. This is a horizontal glass working lathe, bench type, commonly used in precision glass industry for thermometer sealing, electrode sealing, glass to metal seals, graded seals and other blowing and forming operations. The lathe is carefully designed for accurate and precision operation. The machine can be equipped with ring chucks or rapid action chucks (optional at extra cost).

Features:

• The lathe bed is of special casting, well machined and stress relieved.
• Burner carriage and tailstock have smooth precision movement on hardened and ground flat guide ways.
• Spindle drive is by DC motor using roller chains and sprockets.
• Clockwise and anticlockwise rotation of the spindle is by a selector switch.
• Spindle rotation can be varied continuously.
• Tailstock can be declutched by a mechanical clutch.
• The bed guide ways and the moving parts are protected against heat and dust by a cover.
• Both headstocks have provision for internal blowing.
• The machine is supplied complete with motor,controller and a pair of ring chucks.
• The machine is equipped with an electromagnetic brake for immediate stand still and is blocked for easy opening and closing of the scroll chucks. The brake releases automatically when the machine is started again.

Please send the requirements with full details and mentioned the quantity as well.

These are made of special heat resistant carbon for hot working of quartz and borosilicate glass. Reamers available for all sizes of standard joints. Specify the joint sizes for appropriate reamers.

Please send the requirements with full details and mentioned the quantity as well.

We offer Adjustable Flask Holders. Screw type and spring loaded for holding conical, round bottom flasks. Available in various sizes to suit flask capacity and size. The above holders are provided with strong steel jaws and polished wooden handles for easy handling.

Please send the requirements with full details and mentioned the quantity as well.

High capacity, noiseless Bench burner. Special design for hydrogen and oxygen, surface mix, one knob control from pinpoint to bushy flame. Burner head is made of solid stainless steel. Burner head available in 40, 50 & 65mm dia.

Please send the requirements with full details and mentioned the quantity as well.

We offer Multiple jet Surface mix Lathe Burner - Litton type.

Please send the requirements with full details and mentioned the quantity as well.

• Sizes available Dia: 12”, 10”, 8” & 6”
• Continuos Rim
• Grit: 100/120
• Cutting Edge Rim Thickness: 1mm, 1.5mm & 2mm

These are high intensity water cooled Quartz working Burners and are suitable for use on gas and oxygen. Burner head is designed from solid stainless steel and assembly is water cooled for Quartz working. Available in various burner head sizes to suit individual applications.

Please send the requirements with full details and mentioned the quantity as well.

We hold expertise in providing Brass Reamers. Comprising a set of 8 reamers.We offer entire instrumentation for a pharmaceutical laboratory as a package offer.

Please send the requirements with full details and mentioned the quantity as well.

UNIVERSAL CUTTING SAW - FLOOR MODEL

A high precision machine with rugged construction with a tillable head, suitable for cutting glass, quartz, ceramics, tubes, rods and other similar materials.

The til table head is made from corrosion resistant aluminum alloy supported on hardened and ground corrosion resistant steel/stainless steel shaft. The head could be adjusted and fixed at any portion.

Spindle is made of stainless steel supported on very high precision bearings lubricated and sealed. The machine can accommodate cutting discs with dia 250 upto 400mm.

The spindle with the flanges are dynamically balanced to provide longer life to cutting disc. The cutting table is made from corrosion resistant aluminium and runs on bearings on stainless steel guide shafts. The machine is mounted on antivibration mounts to ensure reliable smooth cut. The machine is also provide with stainless steel tray for chip removal.

Standard Accessories:

• 1 piece water pump with water clearing vessel.
• 2-piece water catch plates welded to the machine sides.
• 1 piece longitudinal stop for use on left or right side.
• 1 piece longitudinal stop for cutting tubes longitudinally.

Special Accessories:

• Rest for mounting on left side of machine.
• Automatic, steplessly variable feed mechanism for cutting table.
• Extra long water plates to be fixed on the sides of the machine.
• Cutting table made of stainless steel, instead of aluminium.
• Water clearing vessel made of stainless steel instead of steel coating.
• Roller rest with longitudinal stop, water catch plates and an additional rest guide for cutting tubes of more than 140mm diameter. The rollers from wear resistant plastic have service free slide bearings.

Specifications:

We offer Bench Burner-Mixed Gas Feed-WITH 3 INTERCHANGEABLE JETS

These are specially designed bench burners suitable for use on LPG, Oxygen. The gas is premixed and gives high heating values. Gas bore size available - 6 & 9mm.

Please send the requirements with full details and mentioned the quantity as well.

• Available in bore size of 4mm, 6mm, 9mm and 12mm.

Features: Burner head available in 23mm dia.

Please send the requirements with full details and mentioned the quantity as well.